0
Mercedes-Benz CL-Class
The Mercedes-Benz CL-Class is a luxury automobile manufactured by German automaker Mercedes-Benz. It is currently available in four models: CL 63 AMG, CL 65 AMG, CL 500 and CL 600.
192 Questions
What is the drag coefficient of the 2012 Mercedes-Benz CLS-Class?
The 2012 Mercedes-Benz CLS-Class has a drag coefficient of 0.28 Cd.
How to find year of manufacture OF Mercedes Benz?
VIN numbers are generally the key to this question. scroll to the bottom of this site and put yours in http://www.benzworld.org/modelguide.html
What size engine does the 2006 Mercedes-Benz CLS-Class have?
The 2006 Mercedes-Benz CLS-Class has a V8 engine.
What is the drag coefficient of the 2005 Mercedes-Benz CL-Class?
The 2005 Mercedes-Benz CL-Class has a drag coefficient of .28 Cd.
How many horsepower does the engine in the 2013 Mercedes-Benz CL-Class have?
The 2013 Mercedes-Benz CL-Class's engine produces 429 hp @ 5250 rpm.
How do you setup bluetooth for your cls 550?
I read all the negatives about the Mercedes Bluetooth puck. Very few phones were compatible and most of those would not allow upload of the phone's contact list. We have three phones and 2/3 would not work.
I searched all over the place and found a company called Autotronics (www.autotronics.com) which offers for $249 a plug-compatible that seems to work with most anything. They were very price competitive, the part is literally plug-in 5 seconds install (open the console, pop off the plastic cover, plug this thing in). It is a quality look & feel part. It seems to work with anything (We have a Droid, a BB, and an iPhone). There are two possible interfaces in the car and their web site has a nice set of photos to identify which you have.
Once I plugged it in, I pushed the button on the puck to start pairing, followed the Bluetooth search menu on the phone (about 3 steps), and it was a total of about 5 minutes (no crap) start to finish and I was up and running.
Trunk will not close on Mercedes cl500?
press the key lock in with your thumb and you will hear a click. You should be able to close your trunk.
How do you change oil on Mercedes cls 500?
I THOUGHT I ANSWERED THIS QUESTION BEFORE. YOU CAN IF YOU WANT TO BUY THE ($200.00) TOOL THAT'S REQUIRED TO REMOVE THE SKID PLATE: PART #800245 COST IS APPROX. ( $100.00 ) AND WELL WORTH IT.
THIS TOOL SIPHONS THE OIL OUT OF THE CRANKCASE WITH A 5FT. HOSE. IT'S PROBABLY SIMILAR TO THE BILSTEIN PROCESS THAT SOME DEALERS USE.
Where is the Mercedes C180 Fuel Filter?
go under the right side of the boot beside the back wheel and there is a plastic cover over it.
How do you reset service B on a 2000 Mercedes S500?
= Resetting Oil Service
Indicator Lights = = Mercedes Benz = 1998-06 All Models with Flexible Service System (FSS) The "Wrench" symbol will appear in the odometer field. To reset, turn the ignition key to position 2. Immediately press the button next to the display twice within one second. The present status for days or distance will be displayed. Within 10 seconds, turn the ignition key to the 0 position. Press and hold the button while turning the key to position 2 again. The status for days or distance will be displayed again; continue to hold the button. After 10 seconds, a signal will sound and the display will show 10,000 miles (15 000 km). Release button. ---- S350 CL500 SL500 S430CL600 SL600 S500 CL55 AMG SL55S600 CL65 AMG SL65 AMG S65 AMG * Switch on ignition. * Press the system selection button repeatedly until the total mileage is displayed in the multifunction display. * Press the scroll forward/backward button repeatedly until the service symbol is displayed in the multifunction display. * Press and hold the reset button for 3 seconds. * The multifunction display will show "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH THE RESET BUTTON". * Press reset button to confirm. * Switch off ignition. ---- C230 CLK35O R350ML350 C280 CLK500 R500 ML500C350 CLK55 AMG C55 AMG * Turn key in electronic ignition to position 1. * Press the system selection button repeatedly until the basic display (kilometer reading or temperature display) appears in the multifunction display. * Press the trip odometer reset button 3 times briefly. A signal tone sounds and the voftage display appears in the multifunction display. * Press lower scroll forward/back button the "Service menu" appears in the multifunction display. * Press buttons + and -' setting of specific functions and volume controls repeatedly and select 'confirmation" menu item. * Press lower system selection button to confirm. "Confirmation appears in the display and the menu ftem "Complete service" is shown against a highlighting bar. * Press lower system selection button to confirm. "Service confirmed" appears in the display. * Press the upper system selection button repeatedly until the "Service Menu" is shown in the display. * Using the + and - buttons, setting of specific functions and volume controls, select menu item "Special work.' Press lower system selection button to confirm. * Using the + and - buttons, setting of specific functions and volume controls, select menu item 'Service 13." Press lower system selection button to confirm. * Using the + and - buttons, setting of specific functions and volume controls, select the specification of the engine oil used "Standard oil" or "Oil quality 229.5.' Press lower system selection button to confirm. * the message "Item confirmed" appears in the display." ---- Mercedes Benz S500, S600 Turn key in ignition lock into position 1. Press and hold down OK button and right accept/terminate phone call button simultaneously for approx. 5 seconds. Select ASSYST PLUS Workshop and confirm with the OK button. Select "Service Performed' with scroll forward/back button and confirm with OK button.
Good LUCK!! - GUS MENdoza
How do you remove the battery CL600 Mercedes?
The battery of a Mercedes Benz CL600 as of 2002 is located in the rear trunk on the passenger side.
How many miles can be put on a 97 Honda accord 2.2?
With proper maintenance probably 150-200,000 miles
How to adjust the clock on the CL compressor?
The clock has to be set through the comand unit/radio. Push the SERV button on the comand, then go to SETTINGS, then TIME AND DATE. and set the time and date, *note* you will probably have to drive the car to pick up sattilites. and gps position.
