Mitsubishi Trucks

For the 1998 Mitsubishi pickup with the 4D56 engine, the valve clearance specifications are typically 0.20 mm (0.008 inches) for the intake valves and 0.25 mm (0.010 inches) for the exhaust valves when the engine is cold. It's essential to check the manufacturer's service manual for any specific adjustments or variations that may apply to your particular model or region. Regular maintenance of valve clearances helps ensure optimal engine performance and longevity.

To change the clutch cable on a 1991 Mitsubishi Mighty Max truck, start by lifting the vehicle and securing it on jack stands for safety. Disconnect the old cable from the clutch pedal assembly inside the cabin and the clutch fork under the hood. Remove any retaining clips or bolts holding the cable in place, then thread the new cable through the same path, ensuring it is properly adjusted. Finally, reconnect the cable to the pedal and clutch fork, and check for proper operation before lowering the vehicle.

On a 1995 Mitsubishi Mighty Max, the camshaft positioning sensor is typically located near the front of the engine, often attached to the cylinder head or near the timing belt cover. It is positioned to detect the position of the camshaft as it rotates, helping to coordinate engine timing. For precise identification, it's advisable to refer to the vehicle's service manual or consult a professional mechanic.

On a 1988 Mitsubishi Mighty Max 2.0, the timing marks are located on the crankshaft pulley and the timing cover. The crankshaft pulley typically has a notch or a mark that aligns with the timing scale on the timing cover. Additionally, the camshaft may have a mark that needs to align with a corresponding mark on the cylinder head or cover. It's important to ensure the engine is at top dead center (TDC) on the compression stroke for proper timing alignment.

The firing order for a 1987 Dodge Ram 50 with a 2.0L or 2.4L engine is 1-3-4-2. This order ensures that the engine operates smoothly and efficiently by firing the cylinders in the correct sequence. Always refer to the vehicle’s service manual for specific details and any variations based on the engine type.

The lug nut size for a Mitsubishi Fuso typically varies by model and year, but many models commonly use a 12mm x 1.5 thread size. It's important to check the specific vehicle's manual or specifications for the exact size, as variations may exist. Always ensure you have the correct tools and specifications before performing any maintenance.

The timing marks for a Mitsubishi Canter 4M40 engine are typically located on the front of the engine, near the crankshaft pulley and the timing cover. The crankshaft pulley usually has a mark that aligns with a corresponding mark on the timing cover. Additionally, there are marks on the camshaft gear that should align with fixed points on the engine when the timing is set correctly. Always consult the vehicle's service manual for precise alignment instructions and specifications.

To rebuild the carburetor on a 1988 Mighty Max, start by removing the carburetor from the engine, ensuring to disconnect all linkages, hoses, and the fuel line. Clean all parts thoroughly using a carburetor cleaner, paying special attention to jets and passageways. Replace any worn or damaged components, including gaskets and diaphragms, using a rebuild kit specific to your carburetor model. Reassemble the carburetor, reinstall it, and adjust the mixture and idle settings as necessary for optimal performance.

To fit Mitsubishi Shogun fan belts, first, ensure the engine is off and cool. Loosen the tensioner bolt and adjust the tensioner to relieve tension on the old belt, then remove it. Install the new fan belt by routing it around the pulleys according to the belt diagram, ensuring it sits correctly in the grooves. Finally, adjust the tensioner to apply proper tension to the new belt and tighten the tensioner bolt.

The 1997 Mitsubishi Canter is a light-duty truck known for its reliability and versatility, often used for various commercial purposes. It features a 4M51 engine, a 4-cylinder diesel engine that provides a balance of power and fuel efficiency. This model is popular for its maneuverability in urban settings and its capability to handle diverse loads. Regular maintenance is essential to keep the engine running smoothly and to extend the truck's lifespan.

To bleed the brakes on a 1990 Mitsubishi Fuso FK with an air-over-hydraulic system, start by ensuring the vehicle is on a level surface and the air system is charged. Begin by locating the bleeder valves on the brake calipers, usually at the top. Have a helper press the brake pedal while you open each bleeder valve, allowing air and fluid to escape until a steady stream of fluid flows out; then close the valve before releasing the pedal. Repeat this process on each brake, working from the furthest wheel from the master cylinder to the closest, ensuring the master cylinder is kept topped off with brake fluid throughout the procedure.

A bad smell in the cab of your Mitsubishi L200 while driving could be caused by several factors, such as a clogged cabin air filter, mold or mildew in the HVAC system, or a coolant leak. It’s also possible that food or trash left in the vehicle is decomposing. To address the issue, inspect and replace the cabin air filter, check for any leaks, and thoroughly clean the interior. If the smell persists, consider having the HVAC system professionally cleaned to eliminate any mold or bacteria.

The valve clearance specifications for the Mitsubishi 4M51 engine are typically set at 0.15 mm (0.006 inches) for the intake valves and 0.20 mm (0.008 inches) for the exhaust valves. It's important to check these clearances regularly to ensure optimal engine performance and prevent potential damage. Always refer to the specific service manual for your vehicle to confirm these values, as they may vary slightly depending on the model and year.

The Mitsubishi RVR typically uses a timing chain rather than a cambelt (timing belt). Timing chains are generally more durable and require less frequent maintenance compared to timing belts. However, it's essential to check the specific model year and engine type, as specifications can vary. Always refer to the owner's manual for the most accurate information.

The valve clearance for the Mitsubishi Fuso 4D31 engine is typically set at 0.15 mm (0.006 inches) for the intake valves and 0.25 mm (0.010 inches) for the exhaust valves when the engine is cold. Always refer to the specific service manual for your vehicle to confirm these specifications, as they can vary slightly based on the model year and application. Regular adjustments are essential for optimal engine performance and longevity.

The valve tappet clearance for the Mitsubishi 4D30 diesel engine is typically set between 0.15 mm and 0.20 mm for the intake valves and 0.20 mm to 0.25 mm for the exhaust valves. It's important to adjust the clearance when the engine is cold to ensure accurate measurements. Regular maintenance of the tappet clearance helps in optimal engine performance and reduces noise. Always refer to the specific service manual for precise specifications and procedures.

To remove the steering wheel from a Mitsubishi Canter, first disconnect the negative battery terminal to ensure safety. Next, use a steering wheel puller tool to remove the wheel, but first, check for any retaining screws or clips that may need to be removed. Once these are taken care of, carefully position the puller and apply pressure evenly to detach the steering wheel from the column. Finally, gently pull the wheel off, taking care not to damage any components.

For the Mitsubishi Canter engine model 4M51, the torque specifications for the cylinder head bolts are typically around 100 Nm (Newton-meters) with specific tightening sequences. For the main big end bearing bolts, the torque specification is generally about 70 Nm. It's important to consult the specific service manual for your engine, as these values can vary slightly based on the model year or specific configuration. Always follow the recommended tightening sequence to ensure proper sealing and performance.

For the 1992 Mitsubishi Mighty Max 2.4, the timing marks are located on the crankshaft pulley and the timing cover. Align the "T" mark on the crankshaft pulley with the pointer on the timing cover to set the engine at Top Dead Center (TDC) for cylinder one. Ensure that the camshaft and balance shaft marks are also aligned properly for correct timing. It's essential to refer to a service manual for detailed diagrams and specifications during alignment.

Oh, dude, you're asking about valve clearance for a 4D32 Mitsubishi engine? It's like the holy grail of car maintenance questions! The valve clearance for that bad boy is typically around 0.25mm for both intake and exhaust valves. But hey, if you're not feeling up to the task, just take it to a mechanic and let them deal with all that technical stuff, right?

Valve clearances for the Mitsubishi 4D33 engine are typically set at 0.25mm for both the intake and exhaust valves. It is important to follow the manufacturer's specifications precisely when adjusting valve clearances to ensure optimal engine performance and longevity. Regular maintenance and adjustment of valve clearances are crucial to prevent issues such as poor engine performance, excessive wear, and potential valve damage.

Well, isn't that a happy little question! On the 1991 Mitsubishi Mighty Max, the fuel pump fuse is typically located in the fuse box under the dashboard on the driver's side. It's important to take your time and gently look through the fuse box, making sure to check each fuse carefully. Just remember, there are no mistakes, only happy little accidents in the world of car maintenance.

I have been offered a Mitsubishi 4D35 and a turbo charger c/w manifold that is not yet fitted. Is this engine made standard production with turbo? Or would the turbo be off a 4D34T? If this turbo is fitted, what would be the HP and the Torque from the engine?

Tappet clearance, also known as valve clearance, is the space between the top of the valve stem and the rocker arm. This clearance is crucial for proper engine performance as it ensures that the valves open and close at the correct time during the engine's operation. For a Mitsubishi Canter 4D33 engine, the recommended tappet clearance is typically around 0.25mm for the intake valves and 0.35mm for the exhaust valves. It is important to consult the specific technical manual for the Mitsubishi Canter 4D33 engine to ensure the correct tappet clearance values are used during maintenance.

The oil capacity of a Mitsubishi Fuso truck can vary depending on the specific model and engine type. Generally, a Mitsubishi Fuso truck can hold anywhere from 15 to 30 quarts of oil. It is important to refer to the owner's manual or contact a Mitsubishi dealership to determine the exact oil capacity for a specific vehicle.