0
Wireless Networking and WiFi
Questions concerning setting up and troubleshooting a wireless network from Netgear, Linksys, Actiontec or other manufacturers
2,897 Questions
What is security key for Mysore ITI wireless network near SJCE college mysore?
WikiAnswers does not provide security or hacking information.
Please contact the system administrator for information.
WEP is a very basic level of wireless privacy. While vulnerable to cracking it is still a decent tool in residential areas where there are a lot of unsecured networks. It acts as a deterrent to web surfers just looking for a quick and easy internet connection.
ZigBee is similar to Bluetooth and connects to wireless devices. It is a low cost and energy efficient application that has been around since the 1990's. The devices work very differently than Bluetooth and the markets don't interfere.
Because the flux capacitor is broken.
Is the internet shared with each user on a PC?
Yes, unless the owner of the PC blocks access, any users who are allowed to use a PC connected to the internet can share that internet connection.
C. Reassociate with access point B
Network + Guide to Networks Fifth Edition, Chapter 8
How do you tell if the network requires wpa2?
In the list of available networks, right click the one you want to check and check properties. You will see all required information.
What is Wireless transmission system?
A wireless transmission consists of at a minimum: input signal (the data or analog signal you wish to transmit), transmitter, 2 antennas, space (the final frontier) and a receiver/reproducer.
This only makes one way transmission possible. You would need an additional: transmitter, receiver/reproducer and 2 antenna couplers (allows both a transmitter and receiver to use the same antenna) to have 2 way communication.
A basic transmitter consists of a power source, a signal generator (oscillator), signal converter/amplifier, mixer (mixes the oscillator and amp signals to create the transmitted signal), output amplifier.
a receiver is similar to a transmitter except instead of mixing the signal with the oscillator signal it removes the oscillator signal. Systems can be much more complicated depending on power needs (distance between antennas, frequency interference...) and application (encoder/decoder, security or digital conversion).
What is the maximum transmission distance of Wireless Personal Area Nework?
This varies greatly depending on the amount of obstructions to the wireless signals as well as the strength of the transmission.
Signal has 0-1 values. is this will be analog or digital signal?
If the values are only 0 and 1 then the signal is digital.
Yes its possible, just enable ICS and and provide IP address to wireless router as follows
IP 192.168.0.5
Subnet 255.255.255.0
Gateway 192.168.0.1
DNS 192.168.0.1
And use normal lan port of your router to connect ICS PC instead of WAN port.
How do you turn wireless capability on?
Turning on the wireless varies depending on the operating system and version of your computer. Below is a list of common operating system and versions and how to turn on the wireless:
Windows XP SP2 Wireless Client
- Find the wireless connection icon in the System Tray or click Start, then click Control Panel, then click Network Connections, and find the Wireless connectionicon. Right-click and select View Available Wireless Networks from the menu.
- Click the wireless device you want to connect to from the list.
- Click Connect.
- Click OK to close the window.
Windows Vista Wireless Client
- Click the Start button.
- Click Connect To.
- Click the name of the correct wireless network in the list.
- Click the Connect button.Type the WEP key in the Security key or passphrase field.
- Check the box next to Display characters. This shows the WEP key in plain text.
- Click the Connect button.
- Check the box next to Save this network.
- Check the box next to Start this connection automatically.
- Click the Close button.
- Choose a location for the wireless connection.
- Click the Close button.
Windows 7 Wireless Client
- Click the Start button. Click Control Panel.
- Click Network and Internet. Click Network and Sharing Center.
- Click Connect to a network.
- Click the name of the correct wireless network in the list.
- Click the Connect button. Type the WEP key in the Security key or passphrase field. Click OK.
- Choose a location for the wireless connection.
- Click the Close button.
Apple Airport Wireless on OS 10.1-10.4
Connect Wirelessly via Radio Menu
- Click the Wireless Radio link.
- If the connection requires a WEP key, select the option for WEP 40/128-bit hex in the Wireless Security pop-up box, enter the WEP key in the Password field, check the box next to Remember password in my keychain and click OK.
Connect via the Internet Connect Utility
- Click the Wireless Radio link. Click Open Internet Connect. If using this option skip to Step 8, or open the Apple menu.
- Click System Preferences.
- Click Network under Internet and Network.
- Click on Airport.
- Click the Connect button to open Internet Connect.
- Click on the wireless device you want to connect to from the Network drop-down menu.
- If the connection requires a WEP key the following window will appear. Select the option for WEP 40/128-bit hex in the Wireless Security pop-up box, enter the WEP key in the Password field, check the box next to Remember password in my keychain and click OK.
Wireless Settings
- To check the wireless settings click the Applemenu.
- Click System Preferences.
- Click Network under Internet and Network.
- Click the Configure button or double-click on Airport.
- Click the Options button to verify default settings. Click OK to return back to the previous window.
- Click TCP/IP and verify default settings.
- Click PPPoE and verify default settings.
- Click AppleTalk and verify default settings.
- Click Proxies and verify default settings.
- Click Apply Now if any changes have been made.
Apple Airport Wireless on OS 10.5
Connect Wirelessly via Radio Menu
- Click the Wireless Radio link.
- Choose the desired wireless network from the list.
- If the connection requires a WEP key, Enter the WEP key in the Password field.
- Put a check the box next to Show password.
- Put a check the box next to Remember this network.
- Click OK.
Wireless Settings
- Click the Apple menu.
- Click System Preferences.
- Click Network.
- Choose Airport from the list on the left side of the window.
- Choose the desired wireless network from the Network Name pop-up list.
- Enter the WEP key in the Password field.
- Put a check the box next to Show password.
- Put a check the box next to Remember this network.
- Click OK.
Apple Airport Wireless on OS 10.6
Connect Wirelessly via Radio Menu
- Click the Wireless Radio link.
- Choose the desired wireless network from the list.
- Enter the WEP key in the Password field.
- Put a check the box next to Show password.
- Put a check the box next to Remember this network.
- Click OK.
Wireless Settings
- Click the Apple menu.
- Click System Preferences.
- Click Network.
- Choose Airport from the list on the left side of the window.
- Choose the desired wireless network from the Network Name pop-up list.
- Enter the WEP key in the Password field.
- Put a check the box next to Show password.
- Put a check the box next to Remember this network.
- Click OK.
* anonymous source *
Do I need wireless with a cable modem?
No. Your computer would connect directly to the cable modem via an ethernet cable.
Network+ Guide to Networks answer: A beacon frame
How do you know what is the wifi password on an xfinity box?
Generally the wifi password is printed on a label on the box itself, or comes with it on a printed sheet. If neither of those is the case you can call Comcast for customer support.
Adjacent channel interference nearby frequency leak into passband. The problem can be worse if an adjacent channel user is transmitting in very close range to a subscriber receiver. This problem is referred as near far affect. By Kazi Ashique Ahmed Rafi
it usaully occurs in CDMA when users are transmitting unequal powers.
by salman ahmed
Where do you find the pass word to wireless router on the back?
All default passwords are available online. Just google your router brand and model + default password. You will find all information you need and more.
What are the routing metrics for OSPF?
OSPF uses cost as its routing metric .
cost is calculated for every outgoing interface of a router through which packets transfer.
it is calculated by the formula
cost = 100000000/(bandwidth of output interface)
most likely bandwidth of serial int is 1544kb= 1544000 bytes
PS: all cost calculation to be done in bytes for ease
