answersLogoWhite

0

📱

Technology

The practical application of knowledge, especially in a particular area, is called technology. Advances in technology affect every area of our lives. This category is for questions about technology and includes everything from how to remove a scratch from a CD to applications of electronics to what polyester is made from and more.

35,090 Questions

What is the limitations of a microphone?

Some limitations of a microphone include sensitivity to background noise, distortion at high volume levels, and directionality in capturing sound. Additionally, the frequency response of a microphone may not capture a full range of audio frequencies accurately.

How does QCIF CIF 2CIF DCIF 4CIF and D1 compare to each other?

These terms refer to different video resolutions. QCIF (176x144) is the lowest resolution, followed by CIF (352x288), 2CIF (704x288), DCIF (528x384), 4CIF (704x576), and D1 (720x576). 4CIF and D1 are commonly used for high-definition video, while QCIF is typically used for low-bandwidth applications.

What is the mechanism of digitized sound?

A chip called an Analogue to digital converter (ADC) is used to convert sound waves in the form of analogue electrical impulses, into numeric values which can then be processed by the computer.

Conversely, a chip called a digital to analog converter (DAC) does the reverse.

The quality of the sound recorded is goverend by two constants , this is the sample rate and the bit depth.

The sample rate is the number of samples of a sound taken per second. For instance a CD is sampled at 44kHz or 44,000 samples per second.

The bit depth describes the maximum value of a number used to store the amplitude of a sound. The greater this value the greater the change between silence and the maximum sound value stores or greater dynamic resolution. In the case of CD's 16 bit or a value between 0 and 65535.

How can messure bolt diameter?

#1 Simplest way is to buy a bolt gauge from a hardware store or online.

Example:

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=39240&xcamp=google&utm_source=googlebase&utm_medium=cpc&zmam=33951326&zmas=12&zmac=112&zmap=39240

#2 Next method is to see if you or someone you know ever purchased an assortment of nuts and bolts from a hardware store that has labeled drawers. Take nut from the labeled drawer and match it up.

#3 You can make your own bolt gauge if you own a set of drill bits. Drill holes in sheet metal or wood and label the holes. Push the bolt in the holes till you find a fit. This will not give you the thread pitch though which you usually need for a mating nut.

#4 If you have a set of wrenches that are the size of the bolt threads match them up until you find a fit. You probably do not have wrenches that small though. I assume it is a small bolt.

#5 Use calipers to gauge the diameter and place the gauge reading on an accurate ruler. This will not give you the thread pitch either.

Why does Cotton dry slow?

Cotton fibers are highly absorbent, which means they can hold a lot of water. This can contribute to cotton drying slowly because the water needs time to evaporate out of the fibers. Additionally, the tight weave of cotton fabrics can trap moisture, further slowing down the drying process.

What is the function of a light dependent resistor?

The resistance of LDR increases when light is not available (or is limited). And the resistance drops when Light is abundant.

This principle can be used in proximity detectors where one or more light source(s) is/are active. When a person / object comes in proximity of the source, the light gets reflected from the object-surface & can now be received by LDR. So due to proximity of the object, resistance of LDR changes - this can be used to trigger different actions like open the door, trigger a motor. Fire an alarm. etc.
Resistance of LDR varies according to intensity of incident light over it,It is used in street light to detect day/night and turn on/off the street light automatically

What battery runs out faster energizer or duracell?

The battery life of Energizer and Duracell batteries can vary depending on factors such as the device being used and how it is being used. Both brands are known for their high-quality batteries with long-lasting power. It's not accurate to say one brand always runs out faster than the other.

Two measuremnets to rate capacity of UPS?

1) Rated Protection of the UPS

2) Run Time.

Rated protection is usually in KVA or VA (KilliVolt amps for very large UPS or Volt Amps for smaller UPS). This is because UPS typically have multiple outputs like 120V 240V and possibly 12VDC. Some only list WATTS. This assumes the UPS will have only one Voltage output so the Volts X Amps=Watts was already calculated.

There is also something called a "Power Factor" that comes in to play. For computers it is ~60% which means if you are backing up a PC it will take more power than you think or the UPS will run for less time than you think because of the power factor.

Runtime is usually presented in a chart since it will vary based on the load it is supporting.

A battery has a rated Amp/Hour capacity. Amps per hour. You use a fraction of this over time until there is no more energy.

Using Ohms Law you can determine the Amps from Watts or KVA/VA.

P=IxE or Power ( watts) = Current( amps) x Electrical energy ( Volts)

So I (amps) = P(watts) / E ( volts) .

There are other factors like the battery charge level, ambient temperature and losses in cabling etc, that affect the run time in amp hours.

What is the technical difference between draw bar and ball mount?

A drawbar is typically a solid piece of metal that extends from the receiver hitch on a vehicle to provide a connection point for towing trailers. A ball mount is an assembly that includes a shank, platform, and a hitch ball for towing purposes, and can be interchangeable to accommodate different trailer heights. Essentially, the drawbar is the structural piece that fits into the receiver hitch, while the ball mount includes the ball for coupling the trailer.

Describe how polymers are built and how they are broken down?

To Break a polymer water is used to break the inonic bonds in a process know as the hydrolosis effect. RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM RANDOM.

The velocity of light is 3.00 which is equal to what?

This question does not make sense.

Part (1) "The velocity of light is 3.00" is a statement within the question following

Part (2) "which is equal" is again a statement.

Part (3) "to what?" is the question.

So if I ask, "The velocity to what?" and replace the word "velocity" with "light" to define it better, I get, "The light to what?" and substitute the value of light with the given in Part (1) and add the second statement given in Part (2), I get, "3.00 is equal to what?" Hello? is what I want to ask.

Perhaps reversing the original question will enlighten: "What is equal to the velocity of light...which is 3.00?"

Wa-la. This was a trick question. The answer in not only within the question itself, but also happens to correlate to the number of minutes wasted answering this...this...

What is the instruments name to measure air volume in a closed box?

A barometer is an instrument used to measure atmospheric pressure. It can measure the pressure exerted by the atmosphere by using water, air, or mercury. Pressure tendency can forecast short term changes in the weather. Numerous measurements of air pressure are used within surface weather analysis to help find surface troughs, high pressure systems, and frontal boundaries.

HistoryAlthough Evangelista Torricelli[1][2][3] is universally credited with inventing the barometer in 1643, two other noteworthy efforts must be cited. Historical documentation also suggests Gasparo Berti, an Italian mathematician and astronomer, unintentionally built a water barometer sometime between 1640 and 1643.[1][4] French scientist and philosopher Rene Descartes described the design of an experiment on atmospheric pressure determination as early as 1631, but there is no evidence that he built a working barometer at that time.[1]

On July 27, 1630, Giovanni Batista Baliani wrote a letter to Galileo Galilei about the explanation of an experiment he had made in which a siphon, led over a hill about twenty-one meters high, failed to work. Galileo responded with an explanation of the phenomena: he proposed that it was the power of a vacuum which held the water up, and at a certain height (in this case, thirty-four feet) the amount of water simply became too much and the force could not hold any more, like a cord that can only withstand so much weight hanging from it. [5]

Galileo's ideas reached Rome in December of 1638 in his Discorsi. Rafael Magiotti and Gasparo Berti were excited by these ideas, and decided to seek a better way to attempt to produce a vacuum than with a siphon. Magiotti devised such an experiment, and sometime between 1639 and 1641, Berti (with Magiotti, Athanasius Kircher and Nicolo Zucchi present) carried it out.[5]

Four accounts of Berti's experiment exist, but a simple model to his experiment consisted of filling a long tube with water that had both ends plugged up, then placing the tube into a basin already full of water. The bottom end of the tube was opened, and the water that had begun inside of it poured out of the bottom hole into the basin. However, only part of the water in the tube flowed out, and the level of the water inside the tube stayed at a precise level, which happened to be thirty-four feet, the exact height Baliani and Galileo had observed that was limited by the siphon. What was most important about this experiment was that the lowering water had left a space above it in the tube which had had no intermediate contact with air to fill it up. This seemed to suggest the possibility of a vacuum existing in the space above the water.[5]

Evangelista Torricelli, a friend and student of Galileo, dared to look at the entire problem from a different angle. In a letter to Michelangelo Ricci in 1644 concerning the experiments with the water barometer, he wrote:

Many have said that a vacuum does not exist, others that it does exist in spite of the repugnance of nature and with difficulty; I know of no one who has said that it exists without difficulty and without a resistance from nature. I argued thus: If there can be found a manifest cause from which the resistance can be derived which is felt if we try to make a vacuum, it seems to me foolish to try to attribute to vacuum those operations which follow evidently from some other cause; and so by making some very easy calculations, I found that the cause assigned by me (that is, the weight of the atmosphere) ought by itself alone to offer a greater resistance than it does when we try to produce a vacuum.[6]

It was traditionally thought (especially by the Aristotelians) that the air did not have lateral weight - that is, that the miles of air above us don't weigh down on the air at our level. Even Galileo had accepted the weightlessness of air as a simple truth. Torricelli questioned that assumption, and instead proposed that the air had weight, and that it was the weight of the air (not the attractive force of the vacuum) which held (or rather, pushed) up the column of water. He thought that the level the water stayed at (thirty-four feet) was reflective of the force of the air's weight pushing on it (specifically, pushing on the water in the basin and thus limiting how much water can fall from the tube into it). In other words, he viewed the barometer as a balance, an instrument for measurement (as opposed to merely being an instrument to create a vacuum), and because he was the first to view it this way, he is traditionally considered the inventor of the barometer (in the sense in which we use the term now).[5]

Due to rumors circulating within Torricelli's gossipy Italian neighborhood, which included that he was up to some form of sorcery or witchcraft, Torricelli realized he had to keep his experiment more secretive, or run the risk of being arrested. He needed to use a liquid that was heavier than water, and from his previous association and suggestions by Galileo, he deducted by using mercury, a shorter tube could be used. With the use of mercury, then called "quicksilver", which is about 14 times heavier than water, a tube only 32 inches was now needed, not 35 feet.[7]

In 1646, Blaise Pascal along with Pierre Petit, had repeated and perfected Torricelli's experiment after hearing about it from Marin Mersenne, who himself had been shown the experiment by Torricelli toward the end of 1644. Pascal further devised an experiment to test the Aristotelian proposition that it was vapors from the liquid that filled the space in a barometer. His experiment compared water with wine, and since the latter was considered more 'spiritous', the Aristotelian's expected the wine to stand lower (since more vapors would mean more pushing against the liquid column). Pascal performed the experiment publicly, inviting the Aristotelians to predict the outcome beforehand. The Aristotelians predicted the wine would stand lower. It did not.[5]

However, Pascal went even further to test the mechanical theory. If, as suspected by mechanical philosophers like Torricelli and Pascal, air had lateral weight, the weight of the air would be less in higher altitudes. Therefore, Pascal wrote to his brother-in-law, Florin Perier, living near the mountain called the Puy de Dome, requesting that the latter perform a crucial experiment. Perier was instructed to take a barometer up the Puy de Dom and make measurements along the way of how high the column of mercury stood. He was then to compare it to measurements taken at the foot of the mountain to see if those measurements taken higher up were in fact smaller. In September of 1648, Perier carefully and meticulously carried out the experiment, and found that Pascal's predictions had been correct. The mercury barometer stood lower the higher one went.[5]

TypesWater-based barometersThe concept that 'decreasing atmospheric pressure predicts stormy weather' was postulated by Lucien Vidie -- and it's the basis for a weather prediction device called a 'storm glass' or 'Goethe barometer' (who popularized it in Germany). It consists of a glass container with a sealed body, half filled with water. A narrow spout connects to the body below the water level and rises above the water level, where it is open to the atmosphere. When the air pressure is lower than it was at the time the body was sealed, the water level in the spout will rise above the water level in the body; when the air pressure is higher, the water level in the spout will drop below the water level in the body. A variation of this type of barometer can be easily made at home.[8] Mercury barometersA mercury barometer has a glass tube of at least 33 inches (about 84 cm) in height, closed at one end, with an open mercury-filled reservoir at the base. The weight of the mercury actually creates a vacuum in the top of the tube. Mercury in the tube adjusts until the weight of the mercury column balances the atmospheric force exerted on the reservoir. High atmospheric pressure places more force on the reservoir, forcing mercury higher in the column. Low pressure allows the mercury to drop to a lower level in the column by lowering the force placed on the reservoir. Since higher temperature at the instrument will reduce the density of the mercury, the scale for reading the height of the mercury is adjusted to compensate for this effect.

Torricelli documented that the height of the mercury in a barometer changed slightly each day and concluded that this was due to the changing pressure in the atmosphere[9]. He wrote: "We live submerged at the bottom of an ocean of elementary air, which is known by incontestable experiments to have weight".

The mercury barometer's design gives rise to the expression of atmospheric pressure in inches or millimeters (torr): the pressure is quoted as the level of the mercury's height in the vertical column. 1 atmosphere is equivalent to about 29.9 inches, or 760 millimeters, of mercury. The use of this unit is still popular in the United States, although it has been disused in favor of SI or metric units in other parts of the world. Barometers of this type normally measure atmospheric pressures between 28 and 31 inches of mercury.

Design changes to make the instrument more sensitive, simpler to read, and easier to transport resulted in variations such as the basin, siphon, wheel, cistern, Fortin, multiple folded, stereometric, and balance barometers. Fitzroy barometers combine the standard mercury barometer with a thermometer, as well as a guide of how to interpret pressure changes. Fortin barometers use a variable displacement mercury cistern, usually constructed with a thumbscrew pressing on a leather diaphragm bottom. This compensates for displacement of mercury in the column with varying pressure. To use a Fortin barometer, the level of mercury is set to the zero level before the pressure is read on the column. Some models also employ a valve for closing the cistern, enabling the mercury column to be forced to the top of the column for transport. This prevents water-hammer damage to the column in transit.

On June 5, 2007, a European Union directive was enacted to restrict the sale of mercury, thus effectively ending the production of new mercury barometers in Europe.

Aneroid barometersSee also: Barograph

Old aneroid barometer

Modern aneroid barometer

An aneroid barometer uses a small, flexible metal box called an aneroid cell. This aneroid capsule (cell) is made from an alloy of beryllium and copper.[10] The evacuated capsule (or usually more capsules) is prevented from collapsing by a strong spring. Small changes in external air pressure cause the cell to expand or contract. This expansion and contraction drives mechanical levers such that the tiny movements of the capsule are amplified and displayed on the face of the aneroid barometer. Many models include a manually set needle which is used to mark the current measurement so a change can be seen. In addition, the mechanism is made deliberately 'stiff' so that tapping the barometer reveals whether the pressure is rising or falling as the pointer moves. It also was invented by Blaise Pascal.

BarographsA barograph, which records a graph of some atmospheric pressure, uses an aneroid barometer mechanism to move a needle on a smoked foil or to move a pen upon paper, both of which are attached to a drum moved by clockwork.[11]

What is technological process?

It is a prescribed way how to realize some activities e.g. technological process of railway station. Namely, all operations with trains in station should be planned in detail (with exact timing of every operation) so everything should be finished in time, otherwise railway timetable for this railway line or even for whole network can be disturbed.

What is a biomass boiler?

A biomass boiler is a device that burns biomass as a fuel to heat water. For eg, The organic matter that is collected from a sewage treatment plant is burnt as fuel, That in turn is used to heat the water or whatever is to be heated. I hope that this helps. :-)

What would happen if you activated a vacuum or hoover in space?

1. You wouldn't have any electric

2. Nothing would happen as there is no air in space.

How many KB 1 GB?

1000 terabytes = 1 kilabyte, 1000 kilabytes = 1 megabyte, 1000 megabytes= 1 gigabyte One mb is 1024 KB, so one GB is 1024 MB ergo 1024 x 1024=1048567

witch means that 1 GB is 1048567 KB

Why does your Maglite flashlight blow the light bulb as soon as you turn it on?

If you have recently purchased light bulbs for your light, it is probably because you have bought the wrong voltage bulb. There are several different types of MagLites and each one must match the voltage of the batteries to the voltage of the bulb.

For example: If you bought a 3v bulb (2-cell) and put it in a 4-C Maglite, you'll blow the bulb

(4 batteries x 1.5v = 6v total)

There are two types of brand-name bulbs for incandescent (non-LED) Maglites. The original OEM bulb was a Krypton bulb and the newer, brighter bulbs are Xenon. They are available for all two through six cell C and D size Maglite flashlights.

Krypton bulbs

LWSA201 - 2-Cell Krypton

LWSA301 - 3-Cell Krypton

LWSA401 - 4-Cell Krypton

LWSA501 - 5-Cell Krypton

LWSA601 - 6-Cell Krypton

Xenon bulbs

LMSA201 - 2-Cell Xenon

LMSA301 - 3-Cell Xenon

LMSA401 - 4-Cell Xenon

LMSA501 - 5-Cell Xenon

LMSA601 - 6-Cell Xenon

See the "Related Links" for examples of each

What does the inside of a flashlight look like?

The inside of a flashlight usually contains a light bulb or LED, a reflector to direct the light forward, and batteries to power the light source. There may also be a switch mechanism to turn the flashlight on and off.

How does GPS with bluetooth work?

A GPS device with Bluetooth connectivity can pair with a smartphone or other compatible device to exchange data. The GPS device receives satellite signals to determine its position, and then it shares this information with the connected device via Bluetooth. The connected device can then display maps and directions using the GPS data.

What happens to atoms when they combine to form a new substance?

Depending on the type of chemical reaction to create a bond between two or more atoms, they only share sub-atomic particles (electrons). Combined atoms don't disappear or loose any particles, but they only share/replace electrons with each other. New substance may be divided in to its atoms back -reversing the combination- if necessary conditions are provided.

On the other hand, chemical reaction may reveal or absorb energy to realize. So the only decrease may be at the energy level in that case, not the particles of atom.

Examples of charles' Law?

Charles law states that if the temperature of a gas increases, then the volume increases (and the opposite a.k.a. temp. goes down, volume goes down).

Imagine a balloon filled with helium on a cold winter day. While you are in the shop, the balloon is normal. As you step outside the balloon begins to shrivel up. This happens because of the temp. of the helium in the balloon deceases and becomes less dense, because the helium particles lose energy and become more concentrated, decreasing the volume. But when you put the balloon in a warm area, it goes back to its original size. I hope this helped you.

Which vibration is more severe sine or random?

Random vibration is typically more severe than sine vibration because random vibrations consist of a wide range of frequencies that can excite resonances across a broader spectrum, making it harder to predict and mitigate potential structural failures. Sine vibrations, on the other hand, consist of a single frequency and are easier to analyze and dampen.