Area

Area = L*B

where L = Length, B = Breadth. both given in feet

So Area = 17.5 * 11.75 = 205.625 sq inches

To convert cubic yards to kilograms for garbage, you would need the density of the garbage. Typically, municipal solid waste has a density of about 250-400 kilograms per cubic yard. Assuming a density of 300 kg/cubic yard, 6 cubic yards of garbage would be approximately 1800 kilograms (6 * 300).

A 1 mile by 0.5 mile area is equal to 880 yards by 440 yards. This would be approximately 440 acres.

Undeterminable. 36 by 6 What? Feet? Meters? And gallons is a VOLUME. You should provide 3 dimensions: Height, Width and length to get a volume to convert to. Maybe you mean a 6 Foot Deep Pool that is 36 Feet diameter. that would be 3 dimensions as a circle has an area of Feet x Feet.

The total land area of Nashville, Tennessee is approximately 475 square miles.

56628 ft2 = 1.3 acre

24 hectares is equivalent to approximately 59.3 acres.

It depends what the units of the 100 x 180 are (100 ft, miles, etc)

A square meter is a measurement of area, not length, so it does not have a direct conversion to inches. The area of a square meter is equal to 1,550.0031 square inches.

There are 57,506,000 square miles of land surfaces in the world, including much that is uninhabitable by humans (Antarctica, arctic climes, swamps, mountains, and deserts).

The metric equivalent is 148,940,000 km2 and this represents 29.2% of the Earth's total surface area.

The question, as stated, cannot be answered sensibly. An acre is a measure of area, with dimensions [L2]. A mile is a measure of distance, with dimensions [L]. The two measure different things and elementary dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

150,000 acres is equivalent to approximately 234 square miles. To provide some context, it is roughly the size of 113,000 football fields.

The question, as stated, cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. A metre is a measure of distance, with dimensions [L]. The two measure different things and elementary dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

The fact that all units for measuring the same attribute are multiples or factors of 10 (or 1000, which is 10*10*10). And since we count in tens, all that is required is to move the decimal place left or right.

For example,

1 kilometre = 1000 metres = 1,000,000 millimetres = 1,000,000,000 micrometres.

Easy!

Now try and remember these conversion factors:

1 mile = 8 furlongs = 1760 yards = 5280 feet = 63360 inches.

Not only that, but with the metric system, similar names (and relations) apply to volumes, mass etc.

With the Imperial system, its a whole new set of factors/multiples for mass, and yet another set of factors/multiples for volume.

A square one-acre parcel would measure 208.7 feet on a side.

To test this answer multiply 208.7 by itself (in other words, square it) and see if the result equals the number of square feet in a meter. (43560.)

1 acre = 4840 sq yards

Technically, this problem cannot be done because townships vary in size from 6 to 54 square miles, and the size is not given in the problem.

If the size of the township is 6 square miles, divide 24 by 6. The answer is 4 townships in 24 square miles.

If the township is 54 square miles, divide 24 by 54. The answer is 12/27 townships in 24 square miles.

So, the number of townships in 24 square miles is 12/27 to 4.

It depends on the dimensions of the cubic rod. To calculate the volume of a cube, you would need to know the length of one side (in feet) and then calculate the cube of that length (side length x side length x side length). The result will give you the volume of the cubic rod in cubic feet.

An acre is a unit of area. A mile is a unit of distance. The two units are, therefore, incompatible.

1 acre = 0.0015625 mile2

11.6 acres = 0.0015625 x 11.6

= 0.0181 mile2

The question, as stated, cannot be answered sensibly. An acre is a measure of area, with dimensions [L2]. A [walking] mile is a measure of distance, with dimensions [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

A cubic foot is a unit of volume. An inch is a unit of length. Therefore, the two units are incompatible.

256 on the floor. 256 on the ceiling. More on the walls, but we

can't calculate them without knowing the height of the room.

There are 1,440,000,000 acres in 2,250,000 square miles. This conversion is based on the fact that 1 square mile is equal to 640 acres.

403,200 acres.

not miles square miles

it is .01875 sq mi