0
Cable Internet
Cable internet is a common high-speed broadband internet connection for home use. Questions about this type of connection and the technologies involved belong here.
1,581 Questions
How do you manage download speed with hughesnet?
There are two main factors that can slow down your HughesNet satellite Internet download speeds. The first is peak times and the second is FAP limits.
Peak times for HughesNet satellite Internet are those periods when many users are sharing the same bandwidth. Typically this begins when people arrive home from work (around 4 PM) and lasts until they all hit the sack (around 10 PM). Weekends are also consider peak time periods. Using HughesNet, or any satellite Internet provider, during peaks times is going to result in slower download speeds simply because of network bandwidth congestion at those times.
For faster downloads of big files, it's best to start them during the early morning hours. They'll usually go a lot faster.
The other issue is FAP (fair access policy) limits. If you exceed your allotted daily bandwidth limit, HughesNet will slow your download speeds to 56 Kbps (dial up speed) until the next 24 hour period begins. This is done to keep a handful of satellite Internet users from hogging all the bandwidth in a particular area and slowing down the service for everyone else in that area. If your downloads are particularly slow on any given day, you may have exceeded your daily HughesNet FAP limit.
Just FYI, HughesNet has a three-hour download period from 3 AM to 6 AM that doesn't apply towards your FAP limit. Again, it's better to do big file downloads in those early morning hours . . . you'll stay within your FAP limit and avoid the slow download speeds at peak times.
You should not run communications cables with power cables. That causes interference on the data cables.
Coax/video and Ethernet should not interfere with each other at all, and you can commonly buy wall face plates that have connectors for both data and video.
You do want to make sure that there is enough room in the holes for both cables to move freely without snagging or binding.
How soon should you set up an obgyn appointment?
Three times to set up an OB/GYN appointment: 1. You have confirmed you are pregnant, 2. You have begun to have intercourse at any age, or 3. You are 18 years old.
What is the LED status in Tellabs 8110 Modem?
When power and line1 led is glowing modem status is OK
when power and Pma led is glowing that means local lead is break.
when power and pma is glowing but line 1 is blinking that means earth in local lead
How is CAT5 in line coupler wired?
If the coupler is described as "INLINE", it would be wired as a straight coupler. All 8 pins are wired straight thru or "inline" as 1 to 1, 2 to 2, and so on until you get to pin 8 which goes to pin 8 on the opposite end.
Can computer models be touched?
If you are referring to computer models as being models that only exist in a computer's memory, then no, they cannot be touched. They are software and you simply cannot touch software. If you mean physical scale models of computers, then yes, they can be touched. They are hardware.
The easiest way to describe software is by picking up a book full of words. The software is the meaning behind those words, not the words themselves. It is the idea those words suggest to you, or what you imagine they mean. The concept the author is trying to convey. The story. None of these things are real -- the software is all in your head, your mind's eye if you will. You cannot touch it any more than you can touch the models in a computer's memory.
The words themselves are akin to the bits and bytes. We can see and touch them but until we actually process them, the software is completely hidden form us. Just as words on a page are meaningless until we actually read them.
The pages that hold the words are the medium, which is really no different to the punch-cards used by early computers to store software (where the bits and bytes were physical holes punched into card -- they could be seen and felt). Nowadays we used hard-drives and optical discs to store software, but the software doesn't actually come to life until we load it into memory and process it -- which is akin to reading the words on a page and extracting their meaning.
What are the advantages and disadvantages of using analogy exams?
PITFALLS IN USING ANALOGIES AND HOW TO AVOID THEM
However, an analogy is a double-edged sword in that uncritical use of it may lead to misconceptions. This is because there is no such thing as a perfect analogy, that is, it is almost always impossible to have a perfect one-to-one fit between the analog and the target. Some pupils may only remember the analog and not the target, while others may focus on irrelevant aspects of the analog to form incorrect ideas about the target (Cosgrove and Osborne 1985; Glynn 1989; Duit 1991).
One way of addressing problems associated with uncritical use of analogies is to adopt the six-step approach suggested by Harrison and Treagust (1994) which is based on a modification of Glynn's (1991) TWA (Teaching-With-Analogy) model.
Although the six steps below are numbered from 1 to 6, the numbering does not necessarily reflect the order in which the steps are to be carried out. Each step is important but the order in which the steps are employed depends on the individual teacher's style, the particular target concept, the analogy being used and the lesson structure that the teacher has in mind. The six steps are as follows:
1. Introduce the target concept to be learned.
2. Cue the pupils' memory of the analog.
3. Identify the relevant features of the analog.
4. Map out the similarities between the analog and the target.
5. Indicate where the analogy breaks down. Use of Analogy in Teaching 81
6. Draw conclusions about the target concept.
In the next section, an illustration of the use of this six-step approach in teaching the particulate theory of matter is given.
The following are some advantages of analogies:
They are valuable tools in conceptual change learning.
They provide visualisation and understanding of the abstract by pointing to similarities in the real world.
They may incite pupils' interest and hence have a motivational effect.
They force the teacher to take into consideration pupils' prior knowledge and may reveal misconceptions in previously taught topics.
You need to log in your router, and enable security for wireless networks.
Do you mean reboot? As in to turn off and restart? Never heard of deboot.
What does G stand for in Linksys router names?
G means updated revision: 54 Mbps, up to 40 meters indoor, 170 outdoor + some new security features such as WPA2-PSK AES.
Which network cable arrangement is the most reliable?
That depends on your requirements and the environment; I don't believe one could say that any particular network cabling is the "most reliable", since it depends on a lot of other factors.
How do you get past proxy server?
Install free proxy software on your PC.
Pay for access to a proxy server located on the internet.
Set up an encrypted tunnel between the proxy installed on your PC and the proxy on the internet.
Set your brower to use the proxy installed on your PC.
Done.
What does it mean that your bandwidth is 318kbps?
It means that every second, you can download 318kbps of information from the internet, that is a good speed the just web browsing, but if you want to do any video downloading or streaming, I would upgrade, you are getting about 1/3 of a megabit per second, and 8 megabits is recommended for full HD streaming
Is it normal for wireless router not to have gigabit port?
Yes. It is only recently that some wireless routers DO have gig ports, and they usually cost more than those that have only 10/100.
What is the average cost for a T3 internet line?
It Depends.
T3 or DS3 Price depends on 4 components
Loop Price ( Cost of the Physical Line)
Port Price ( Cost of the Internet Connection)
Install Cost (Cost to install the DS3 at your location)
Taxes ( This is on the Loop segment only and varies per city and state)
There are On-Net locations. if you are in one of these locations you pay only the cost of the port. http://www.intelletrace.com/OnNet-Bulding-Search.html
Contact Intelletrace for an exact quote. www.intelletrace.com Is_T3_expensive
Can someone access my computer if i leave my network connection open?
Typically no, but computer hackers can access anything they put their minds to.
My dad has put on a password for the internet how do i find out what it is?
Well if your dad has put on a password then he probably didn't want you to go in it but what you could do is ask him
If a modem cable is in conduit with 120 vac will there be interference?
If it's a wired connection...YES. Minimum clearance should be 6-8". I forget which.
What is the max distance for WiFi modem?
First off, the Router is wifi the modem isn't. The max distance anybody has ever gotten is 125 miles. It all depends on the equipment that you're using. Make sure to get a wireless router with an external antennae and you can use your own antenna. possibilities are limitless.
What serial number internet download manager 517?
It's not the right site to ask this + this question may get deleted because it may be be a rule of the terms of use/service.
Your computer is not reading the modem?
Check to make sure all your driver files are current and not corrupted.
The only routers or network equipment I know that use AOSS are Buffalow technology group systems.
I believe it is a proprietary system.
What kind of wire is used with cable modem?
Coaxial and ethernet. The round one is coaxial, the rectangular ones are ethernet.
