Computer Maintenance

Well as you may know an internal hard drive is inside your computer and stores just about all your computers' info. But you may have information on there that you want to take to your friends house, so you would put the info on your internal hard drive on an external hard drive, then put it on your friends computer instead of taking in and out your internal hard drive. So really bottom line here and external hard dirve is a more portable hard drive and easier to carry around.

It's a metal or plastic frame to enable 3.5 inch disc drives to be housed in (older) 5.25 inch drive bays. See the related link to Maplin electronics for a picture.

If your CD eject button does not work, you can either buy a new drive, or go to my computer and right click on your CD drive, and choose eject.

if you are using UPS then no need to use stabilizer.because your computer gets supply from ups after many process,even if you are getting fro ups.when outlet power is available ups in online mode and it feeds your computer from direct supply authority,but ups has some design to stabilize this voltage,

Hi ! These two command tools are the most useful in Exchange Servers( 2003 ) . a. "netstat -an"........it shows a list of listening and connected sockets of websites in Exchange Server. ( tcp, udp, ftp, https, smtp, pop3 and so forth ). b. "netstat -ano"......it shows the process ID (PID) that created the socket. It merely does the same as the first one. swapan.

I've tried the other 'cures' below without success, or else being asked to purchase software! (wonder is this a conspiracy between hp and pcfix software companies???) Anyway, I have just removed the calling program hphmon06.exe and voila! no more message.... This appears to be a H.P. file. I would suggest you reinstall the software or if that doesn't work visit their web site and click support. I just uninstalled all of my HP photo, PSC, etc. programs and then when I rebooted I got an error message that said "The application has failed to start because hpzjrd01.dll was not found. Reinstalling the application may fix this problem." I thne searched the recycle bin and then the entire drive using both the full file name and the only "hpzjrd" with no results. I also searched the HP website and they have nothing there either. The way it APPEARS right now is that it was a direct result of uninstalling those HP programs AND that no harm is done except I may have to live with seeing and closing that error message every time I boot up. I supect though that if I find what it is trying to load and get rid of that command I will be o.k. Click on Start > Run and type MSCONFIG and click OK. Click on Startup tab. Uncheck all entries starting with hp or related to hp. Click Apply and OK. Restart computer. On restarting you will get msg that system is in selective startup. Place a checkbox next to Do not show this message again. The error message will not reappear again now. go to hp.com simple Just Go to dllsearch.com and get your file from there and paste it in two locations c:\windows\system & your installed directory this is for windows 98 for 2000 or xp past it in c:\winnt\system and your installed directory You can find the update on the www.hp.com website problems and troubleshooting at the top of the issues is this problem. It tells you to go to the start menu under hp and do hp software update which should update the program and fix any problems You need to run these 6 essential steps to remove all the spyware on your computer.

1. Run Deckard's System Scanner (DSS)

2. Run the vundo and combo fix

3. Run Malwarebytes Anti-Malware

4. Run the anti spyware removal programs spybot

5 Run Superantispyware

6. Run a complete scan with free curing utility Dr.Web CureIt!

Install threat fire which will enhance your antivirus protection

It is made by ECS and comes as many other brands. The ECS model is 331, The advent model is 7105, The Infinity Model is 330

Note when you perform this all data will be lost and should be backed up before performing this operation!!!

Also make sure you have your dell driver CD or DVD if not go to dell.com and click home, desktop or laptop, support, then drivers, enter the service code and download all ur drivers and burn them to a DVD or CD of you do not do this first you will not be able to access the internet after the operation is complete.

First insert the reinstallation DVD and restart the computer. As soon as the BIOS(the first face that is loaded. Repeataly press the F12 Key during the fase. Select the DVD drive. You will then see press anykey to start from CD or DVD. Press anykey except ESC.

After that it will start to copy files. When the blue screen stops loading select the option to install windows. When the partition table is displayed press the option to delete the partition. When they are deleted and all it shows is unalocated space press enter and follow the propts after some formatting is done the system will restart and ask to start from CD again. Do not push anything it will start on its on and then follow the prompts. After the fresh install is finished and u can view the desktop insert the Drivers CD and install every single driver. Next thing you should do it connect to the internet and right away download and install a Antivirus program. I suggest using Avast its 100% free for home edition.

Your battery is slowly dying.

CMOS is an on-board, battery powered semiconductor chip inside computers that stores information and is also used as image sensors (CMOS sensor)

It depends very much on the details of the problem. It's essentially impossible to answer a question as vague as this, since the "steps" would depend on what the problem WAS. If a particular program is giving me an error message, for example, I probably WOULDN'T check to make sure the computer was plugged in; whereas if the computer wouldn't start, that would be one of the FIRST things I checked.

It basically boils down to common sense, which is frighteningly rare.

The key concept with ROM is that the system can READ this memory, but cannot(normally) write to this memory.

Numeric

It is good to clean it once a year. Cleaning it helps it a lot cause dest and hair can collect in the case. Open the case, and remove clumps of dust and hair with fingers. The remaining dust can be taken out with compressed air. TheRockStar

It depends on so many parameters. If you are going to use commercial software for hard disk editing it might take seconds to format/create/edit/delete and so on your hard dirves. If you are going to use format.exe from Microsoft it will take couple minutes for quick fomating and hours for full procedure.

This is a very generic question. Wheat you mean by feature, image and product will drastically alter the answer. Beyond that, there are different types of computers with different operating systems. Even when I assume the nearly obvious, and guess you're talking about a windows system, the answer to this question may very well be quite different if you're using Windows XP compared to Windows 8.

In general, if I just assume a Windows XP or newer Microsoft OS, 'feature' meaning any app, built in or otherwise, as well as guessing that by "image" you mean an ISO and "product" you mean a CD or DVD (regardless of whether it's music, video, data, or whatever), then I can confidently say that IMGBurn would be a god way to go. It's a free application, designed to burn disc images (such as ISO files) to CD/DVD, create ISO files from CD/DVD, and create ISO files or discs directly from file/folder choices.

It's fairly powerful, relatively easy to use, and can handle the majority of hardware you'll find on the market, as well as running on every major Windows Operating System that's still likely to be in use. If you're using pre-XP Windows, then you really need to consider updating that before worrying about anything else.

If this doesn't help, please update your question with more specific information as to what you're actually trying to accomplish. This answer was crafted using my best-guess assumptions for just about every part of your original question, and could likely be unrelated to what you are actually trying to ask.

Umm I think that windows is messed up becasue there are two time servers that are setup on your system. Try the following - Go to Time and Date Properties then go to Internet Time, make sure that a check box tittled "Automatically synch with an Internet Time Server" is checked and select "time.nist.gov" Its also correct, you might also want to run Update. If that does not help, it might be because you are using the wrong time zone. Hope this helps. Anyways i don't and have never had any problems. I'll come back to this post to try to help you out if that does not work.

In order to be effective thinking needs to be detached and emotionless. Selfishness implies attachment, so thinking is impacted by 'what can I get out of this?' and not the issue at hand

That's called the "MAC address" or "Hardware address". It's a unique set of numbers assigned to a network device. Anything that access the internet whether phones, wireless cards, computers, etc, all have a MAC address.

The address with all one's (FF-FF-FF-FF-FF-FF) is the broadcast address. All devices on the physical segment will see and respond to a message with that destination.

As far as I know, there is really no advanced warning, until the battery starts to fail. For example, on my computer, after using it for several years, the computer started to be unable to maintain the current time. I eventually figured out that this was a result of a weak CMOS battery.

Use your Disc Utility (Applications > Utilities) to perform a permissions repair.

Open Safari and empty your cache, and clear the history.

Check for Software Updates (blue Apple in upper left of your screen), and make sure everything is up to date.

Also run a Mac registry cleaner for the last shot

First of all KEEP IT SIMPLE

The register is going to be a working document. You can use either a speadsheet or database - the option is yours.

Basically you just need to record a companies assets so as an example

using a spreadsheet

starting in column

A - Date of purchase

B - Number of Items

C- Make

D- Description

E - Serial Number or Company ID Number

F - Original Purchase Value

G- Current value of item (this is value minus depreciation for the age/wear and tear updated at least annually)

H - Location (where kept day to day)

I - Date removed from Business

J - Comments

K - Insured/warranty Y/N

L - Warranty expires on Date

The information required by the register must be provided to the keeper of that register through some paperbased or electronic system - Random audits by the "keeper" is a necessity to ensure complience.

Violation of ethics