Computer Networking

A printer cable can connect to a serial printer using a 25-pin "RS-232", DB-25 connector, among other things. In many cases, only a few pins of the defined 25 pins are used (e.g., send, receive, common). There are also adapters that convert between the 25-pin connector and, say, RJ-11 phone cord, RJ-45 Cat 5, or even screw terminals for 3-conductor cable, or what-have-you, for connection to the computer (e.g., a DIN-8 in a Mac), or a converter for USB to RS-232.

If it is a Male connector on PC it will be 25-pin Serial Port, If it is a female connector (purple colored if latest) it is parallel port, sometimes called Printer Port(LPT) - Naresh , InfoMax

Nothing windows has a program in the accesories menu called remote desktop connection, you just need a computer's IP address which you can get by going to the start menu clicking on run typing cmd then pressing enter then a black box pops-up type ipconfig and press enter. Or you can use a program I wrote copy and paste the following in notepad:

@echo off echo Getting IP Address Please Wait ipconfig >>yourip.txt start yourip.txt cls exit Don't copy bellow this Then save that as ip.bat then run it

Brute force

NAT stands for Network Address Translation. NAT's primary role is to configure IP addresses. When NAT is configured to a firewall, it reconfigures the addresses of certain IP packets as they pass through the firewall or through a router.

The default no-refresh interval is set to: 7 days.

One should be using the Server in order to delete one computer in a network.

That refers to any protocol that is outdated, but still used.

That refers to any protocol that is outdated, but still used.

That refers to any protocol that is outdated, but still used.

That refers to any protocol that is outdated, but still used.

Access point.

SC and RJ-45

Typically if a protocol is no longer in use on a network then it would be unbound from the interface, both on servers and on clients.

20

ARP

one disadvantage of using satellite for an internet connection is that it experiences delays in transmission (call latency), especially when uploading, more so than DSL or cable modem

The easiest way is to just take a LAN cable and connect the two computers . or you could use a router in between . now if you are using vista or win 7 [ dont really use xp so you gotta find out these settings yourself] go to the network and sharing center and turn on

1-network discovery

2-file sharing

3-public folder sharing

turn off

1- password protected sharing

copy what ever data you need to either the other computers public folder or into the same computers public folder and copy it to the other computer using the other computer .

IF YOU ARE USING WINDOWS 7

simply make a homegroup it makes file sharing very easy . just right click on the folder you want to share , go to the sharing tab and select read/write homegroup option . done now go to network from the other computer and copy it to that computer . :D

https://www.gicseh.com/diploma-networking.php

https://www.gicseh.com/hardware-training-course.php

This is the best place to learn all the technologies about the Hardware and Networking. Hardware will be included A+ and Networking will start from N+, after this module, will move to the Cisco Networking Part, After the Cisco can move to the Microsoft Learning part then final will be the Red Hat Networking. will be the following sequence.

1. A+ Hardware
2. N+ Networking
3. CCNA Networking
4. MCSA Networking
5. Linux Networking

Hope so this information will help you for your future. all the best

The steps to connecting a media hub to your network may depend on whether it is wired or wireless. The media hub connects your computer and other devices to the web so its placement should not be obstructed. For a wired hub it is simply connected to your computer.

router

A tftp client workers through the use of the internet, where all communication is done via email and no personal exchange is ever given between the consumer and the client.

In software Engineering KPA denotes.

I was a student of this institute as well. I was duped by the fact that since this was owned by Khawar Butt, i would actually learn networking. Joining this institute is the biggest mistake of my life. I regret spending so much time and money. Before i joined this institute, i thought i would come out a successful person in this field, but now my dreams are totally shattered. The J.P nagar branch especially is completely bogus. they have no skilled instructors and the director here is only behind your money. I hope they will be made to pay for playing with students careers. Strict action should be taken against them.

a server runs the website though the internet and sends the data to any computer who asks for the web page

meanwhile a client is a computer asking for the web page

1) You purchase the cable

2) You plug it into the network adapter (network card).

If the cable directly connects two computers, you need a crossover cable; if the computers are connected via a switch (this lets you connect more than two computers), you need a straight cable. Make sure to measure how much cable you need, and to purchase some extra length, to let you move the computers around freely.

In that way it's much easier to control network, maintenance, and control user computers.

You need to buy an adapter with a software driver. Wiki policy does not permit me to give you a manufacturer name but they do exist. I own one that converts my video cam output (RCA) to USB and I can use it as a web cam.