answersLogoWhite

0

Ford Explorer Eddie Bauer

The Explorer Eddie Bauer is a sport utility vehicle manufactured by Ford. The 2010 Ford Explorer Eddie Bauer features a multi-point injection fuel system and is powered by a 4 L V6 engine that can generate 210 horsepower.

4,759 Questions

Door open warning light stays on on your Renault clio?

If the door open warning light stays on in your Renault Clio, it may indicate that one of the doors is not fully closed or that there’s a malfunction with the door sensor. Check each door to ensure they are securely closed, including the trunk. If all doors are closed and the light remains on, the issue may lie with a faulty door switch or wiring, and it could be advisable to consult a mechanic for further diagnosis.

What is the wheel size on a 1989 Eddie Bauer bronco?

The 1989 Eddie Bauer Bronco typically features a wheel size of 15 inches in diameter. The standard tire size for this model is usually 31x10.5R15. However, depending on the specific configuration or modifications, different wheel sizes may also be used. Always check the vehicle's specifications for accuracy.

I have a 2000 Oldsmobile bravada and the all wheel drive seems to not kick into all wheel drive all the way?

If your 2000 Oldsmobile Bravada's all-wheel drive isn't engaging properly, it could be due to several issues, such as a malfunctioning transfer case, a faulty front differential, or low fluid levels in the transfer case. Additionally, the AWD system may require a reset or reprogramming if there are electrical issues. It's best to have a qualified mechanic diagnose the problem to ensure proper repairs and safe operation. Regular maintenance can also help prevent these issues in the future.

What transmission is in a 1996 Eddie Bauer explorer?

The 1996 Ford Explorer Eddie Bauer edition typically comes with a 4-speed automatic transmission, known as the Ford 4R55E. This transmission is paired with either the 4.0-liter V6 or the 5.0-liter V8 engine options available for that model year. It's designed for improved performance and durability in both on-road and off-road conditions.

How do you tighten the belt tensioner on 2004 ford explorer 4.0l?

To tighten the belt tensioner on a 2004 Ford Explorer with a 4.0L engine, first, locate the tensioner pulley on the serpentine belt system. Use a wrench or a ratchet with a socket to turn the tensioner pulley counterclockwise, which will relieve tension on the belt. While holding the tensioner in this position, you can then remove or adjust the serpentine belt as needed. Once the belt is properly positioned, slowly release the tensioner to reapply tension to the belt.

Where can I find a resistor What products contains resistors Can you name me some?

Resistors can be found in various electronic devices, including computers, televisions, radios, and household appliances. They are integral components in circuit boards, where they help regulate current and voltage. Common products that contain resistors include smartphones, gaming consoles, and audio equipment. You can also purchase standalone resistors at electronics stores or online retailers.

Can I convert all wheel drive to 4 wheel drive?

Converting all-wheel drive (AWD) to four-wheel drive (4WD) is generally not feasible due to the differences in system design and operation. AWD systems are typically designed for on-road use and may not have the necessary components, such as a transfer case or low-range gearing, that a 4WD system requires. Additionally, the vehicle's drivetrain and suspension may not support such a conversion without extensive modifications. It's usually more practical to purchase a vehicle that is already equipped with 4WD.

How many fuses dose a 2003 ford 450 super duty have and location?

A 2003 Ford F-450 Super Duty typically has three fuse boxes: one located under the dash on the driver's side, one in the engine compartment, and one in the rear of the vehicle. The exact number of fuses can vary by configuration, but there are usually around 30 to 40 fuses in total across these locations. You can find the specific fuse layout and details in the owner’s manual or on the fuse box cover.

Where is cigarette lighter fuse on Ford Focus 2011?

In a 2011 Ford Focus, the cigarette lighter fuse is located in the fuse box under the dashboard on the driver's side. To access it, open the driver's side door and remove the cover from the fuse panel, which is near the steering column. The specific fuse for the cigarette lighter is usually labeled in the fuse diagram, which can be found on the inside of the fuse panel cover. If you need to replace the fuse, ensure you use one with the correct amperage.

Where is the computer module on a 2009 ford explorer Eddie Bauer?

In a 2009 Ford Explorer Eddie Bauer, the computer module, commonly referred to as the Powertrain Control Module (PCM), is typically located in the engine compartment. Specifically, it can be found near the battery, mounted on the driver's side fender well. Accessing it may require removing some components for better visibility. Always refer to the vehicle's service manual for precise instructions.

Can I drive a osier?

It seems there might be a typo in your question. If you meant "Can I drive a vehicle?" then the answer depends on whether you have a valid driver's license and meet the legal requirements in your area. If you meant something else by "osier," please clarify, and I'll be happy to help!

Can you replace your air ride suspension with regular shocks?

Yes, you can replace air ride suspension with regular shocks, but it requires a comprehensive modification of the suspension system. You'll need to install new shock absorbers, springs, and possibly other components, as air ride systems are designed differently than traditional suspension setups. Additionally, be aware that this change can affect ride quality, handling, and load capacity. It's advisable to consult with a professional mechanic to ensure the modifications are safe and compatible with your vehicle.

How many cold cranking amps for a 1998 oldmobile cutlas?

The 1998 Oldsmobile Cutlass typically requires a battery with a cold cranking amps (CCA) rating of around 600 to 700 CCA. However, it's always best to check the owner's manual or consult with a knowledgeable automotive professional for the specific requirements for your vehicle, as variations may occur depending on the engine type and any modifications.

How big is the cargo opening on a 2013 Ford Explorer?

The cargo opening of a 2013 Ford Explorer measures approximately 41.5 inches wide and 30.5 inches high. This size allows for easy access to the cargo area, accommodating various items and luggage. The spacious design is part of the vehicle's overall versatility for both passenger and cargo transport.

What is the bolt pattern on a 2013 ford explorer?

The bolt pattern on a 2013 Ford Explorer is 5x114.3 mm (5x4.5 inches). This means there are five bolt holes, and the distance between the centers of two opposite bolt holes is 114.3 mm. It's important to use wheels that match this specification for proper fit and safety.

Why does my 1993 suzuki samurai run at idle but stallswhen you give it gass?

If your 1993 Suzuki Samurai runs at idle but stalls when you give it gas, it could be due to several issues. Common causes include a clogged fuel filter, a malfunctioning fuel pump, or a dirty carburetor that isn't supplying enough fuel under load. Additionally, problems with the ignition system, such as worn spark plugs or a faulty ignition coil, could also cause stalling when accelerating. It's best to check these components systematically to identify the root cause.

You are looking for parts breakdown for savage 110?

To find a parts breakdown for the Savage 110, you can visit the official Savage Arms website, where they often provide schematics and exploded views of their firearms. Additionally, online retailers and gun forums may have user-shared diagrams and breakdowns. For an official parts list, consider contacting Savage customer service or checking the owner's manual that came with your firearm.

How do you remove the final drive from the rear wheel of a 2006 v star 1100?

To remove the final drive from the rear wheel of a 2006 V Star 1100, first, ensure the bike is securely supported on a stand. Remove the rear wheel by loosening the axle nut and detaching the wheel from the swingarm. Next, disconnect the final drive by removing the bolts securing it to the swingarm and sliding it off the drive shaft. Finally, ensure all components are properly labeled for reassembly.

How do you fix the over drive flashing light on 2002 ford explorer?

If the overdrive light is flashing on your 2002 Ford Explorer, it typically indicates a transmission issue. First, check the transmission fluid level and condition; low or dirty fluid can cause problems. If the fluid is fine, use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) that can help identify the specific issue. If you're unable to resolve it, it's advisable to consult a professional mechanic for further diagnosis and repair.

Where would the fuse for the brake lights on a 94 sundance bewhat number would it be?

In a 1994 Plymouth Sundance, the fuse for the brake lights is typically located in the fuse box under the dashboard on the driver's side. The specific fuse number may vary, but it is commonly labeled as "Brake" or "Stop Lights." To confirm the exact fuse number, you can refer to the fuse diagram usually found on the inside cover of the fuse box.

Why would the overdrive off light be flashing on my 1993 ford probe?

The flashing overdrive off light on your 1993 Ford Probe typically indicates an issue with the transmission. It may be signaling that the transmission is overheating or that there's a malfunction in the transmission system, such as a problem with the solenoid or sensors. It's advisable to check the transmission fluid level and condition, and if the light persists, have the vehicle inspected by a qualified mechanic to diagnose and address any underlying issues.

Can you tow a two wheel drive 2003 ford explorer?

Yes, you can tow a two-wheel-drive 2003 Ford Explorer, but it's important to follow the manufacturer's guidelines. The owner's manual specifies that it should be towed with all four wheels off the ground to prevent damage to the transmission. Using a flatbed trailer or a tow dolly is recommended for safe towing. Always ensure the vehicle is secured properly during transport.

How do you install a center mounted brake lamp in a 1995 jaguar xj6?

To install a center mounted brake lamp in a 1995 Jaguar XJ6, first, access the rear deck by removing any necessary trim or fasteners. Disconnect the old lamp assembly if one is present, then connect the new brake lamp to the wiring harness. Secure the lamp in place, ensuring it is properly aligned, and reattach any trim or panels removed during the process. Finally, test the brake lamp to confirm it functions correctly.

What stiffy drive?

A "stiffy drive" refers to a type of computer storage device, typically a high-capacity external drive or solid-state drive (SSD) that is designed for durability and reliability. These drives are often used for backing up data, transferring files, or expanding storage for computers and other devices. The term may also colloquially refer to a drive that is physically rigid or has a robust casing, protecting it from damage.

What is the area of the wheel that creates a seal between the bead and the wheel?

The area of the wheel that creates a seal between the bead and the wheel is typically referred to as the bead seat. This area is crucial for maintaining air pressure in the tire and ensuring a proper fit. The exact dimensions of the bead seat can vary based on the wheel and tire specifications, but it generally includes a specific width and depth designed to accommodate the tire bead securely. Proper sealing in this area prevents air leaks and enhances overall tire performance.