I would not recommend a Fram filter in any size. They are not a quality filter and there are way better filters for the same price. I recommend Purolator, Wix, or Bosch.
Reset service engine soon light on 2002 gmc Yukon?
Disconnect the positive (red) terminal from your battery for 30-60 seconds. This will reset the computer & the light should go off until the malfunctioning part malfunctions again resulting in the light coming back on.
How do you reset airbag light on 2003 gmc Yukon?
Take this truck to a professional for repair. Working on the SRS is hazardous and is not a DIY repair. Something is wrong with the SRS or the light would not be on.
What is the location of the oil pump on a 1995 Chevy 5.7 engine?
Your oil pump is bolted to the crankshaft. You have to take the oil pan off the be able to get to it.
Is the bolt pattern of a 2007 GMC Acadia the same as a 2001 GMC Yukon?
GMC has three different bolt patterns: The Acadia has a 6X132 the Envoy has 6X135 and the full size such as Yukon and Sierra which have 6X139. Hope this helps you.
Why does your 2003 gmc Yukon say the rear door is open when its not?
were is the rear door relay located 0n 2003 yukon
How many horsepower does the engine in the 2007 GMC Yukon-XL have?
The 2007 GMC Yukon-XL's engine produces 320 hp @ 5200 rpm.
How do you program the garage door opener on a 2001 gmc Yukon XL?
REad the owners manual. But I believe you have to put garage opener in learn or program mode then depress and hold button on the Yukon this will allow it to program itself to you door remote
How do you program your garage door opener in your 2002 Mitsubishi Diamante?
This information is listed in your owner's manual.
How do you replace a fuel filter on a 2003 GMC Yukon?
I just replaced the filter today. It is a pain! The way I did it was: First, I disconnected the fuse to the fuel pump (lots of pressure) and ran the car until it died. I took off the entire hose and filter assembly (about 1 foot long. Interestingly enough, the connection at the box is only held with a clip (easily removed). Second, I bought a quick disconnect tool at Autozone part #246367 25043 for $7.99, however GM makes it so there is not enough room to insert it. SSOOOO, I ended up cutting of the pipe from the filter as close to the base as i could. Then, with the straight fitting sticking out, i was able to use the tool. Keep this in mind, using the tool STILL destroyed the quick connect metal clip, so you can probably plan to just force it off on the frame. I bought new Steel connector clips from Oreilly's auto parts. It is doorman part# 800-025. I slipped that on the plastic connect on the filter ( you can probably install it in the filter opening, but I wanted it to compress as it was going in so I could see everything lining up), aligned it with the filter opening and pushed it all together. Then, I reinstalled it on the car and checked for leaks. It worked and no leaks. Sorry, no pix. Hope this helps.
What is the basic warranty on the 2015 GMC Yukon-XL?
The 2015 GMC Yukon-XL has a 3 yr./ 36000 mi. basic warranty.
What is the maximum cargo capacity of the 2002 GMC Yukon-XL?
The maximum cargo capacity of the 2002 GMC Yukon-XL is 131.6 cu.ft..
What kind of fuel does the 2008 GMC Yukon-Hybrid use?
The 2008 GMC Yukon-Hybrid runs on regular unleaded.
What is the basic warranty on the 2012 GMC Yukon-XL?
The 2012 GMC Yukon-XL has a 3 yr./ 36000 mi. basic warranty.
What is the front head room in the 2008 GMC Yukon-XL?
The 2008 GMC Yukon-XL has 41.1 in. of front head room.
How do you remove a 2007 Chevrolet Colorado tail light assembly so as to replace a bulb?
# Open the tailgate. # Remove the two screws from the tail lamp assembly. It should be obvious which two as the others clearly are holding the tailgate on. Be careful not to drop and lose them.
# Remove the lamp assembly. There are two clips that hold it in position and if the thing sticks just gently work it out pulling straight back. Don't twist it. # Give a short partial untwist to remove the specific bulb holder with bulb (hint: the brake light is the top bulb). # Pull the bulb straight out (do not twist).
2001 GMC Yukon XL body control module location?
Directly under the steering column - you must remove the kick panel in order to see it. The BCM will have three plug type connectors, facing the driver's seat.
Can you put water in the radiator of a 2001 gmc Yukon?
As a very temporary emergency situation, yes. Without a proper mixture of coolant and water the water will boil at 212°F.
I have a 1999 Forester, but I imagine the 2003 is similar in this regard. You don't actually need to remove the headlamp to replace the bulb. On my car, I unplug the wire from the bulb at the back of the headlamp, remove the large rubber piece around the back of the bulb, unclip the clips that hold the bulb in place, remove and replace. Cheers! Mark
This is a good answer and is so just as stated. Thanks Mark!
RicT
I just had a complete Intake Gasket Set replaced on my 2000 GMC Denali. The labor was $595.00. The Gaskets were $89.00. The shop I use gave me a $100.00 discount so the labor ended up only $495.00.