Jeep Cherokee

Why would you want it to come on. Its not on because theres nothing wrong with your engine.

There are several lamps that could be called "interior lights" on a 94 Cherokee. I assume you mean the Dome light. If so, simply pry off the plastic lense from the dome light housing to reveal the bulb. The bulb has a wire loop on each side that fits over a small metal tab in the socket. The bulb will pull straight down and out with a little tug. Take this bulb with you to Pep Boys etc. to help match up the replacement. The new bulb snaps onto the socket tabs with little pressure. Replace the plastic lense cover and your done. Other lights which you might be referring to are the transmission position indicator light (PRNDL) or the 4WD position indicator light, each of which are small bulbs accessed by prying up the console panels around those levers; or perhaps the console lights (which backlight your fuel guage, speedomter, etc) which can be accessed either by reaching up under the dash or by removing the dash trim (4 screws), and removing the console to reach the bulb sockets behind it. These sockets come out with a quarter turn to release their locking mechanism and pull straight out.

it is adjusted throught the power steering pump loosen the adjuster bolts remove belt and reverse

The fuse diagram for a 1996 Jeep Cherokee typically includes a layout of the fuse box, which is usually located under the hood and inside the cabin. It indicates the location and amperage rating of each fuse, as well as what systems they control, such as headlights, radio, and ignition. The diagram is often labeled with numbers corresponding to each fuse's position, making it easier to identify and replace blown fuses. For precise details, it's best to refer to the owner's manual or a specific repair guide for the vehicle.

In a 1987 Jeep Cherokee, the electric fan relay switch is typically located in the engine compartment, near the radiator or on the fender well. It may be mounted on the firewall or close to the fan assembly itself. You can identify it by following the wiring from the electric fan to find the relay. If you have a wiring diagram, it can help pinpoint the exact location.

There could be several reasons why a 2000 Jeep Cherokee won't run. Common issues include a dead battery, faulty ignition system, or fuel delivery problems, such as a clogged fuel filter or failing fuel pump. Additionally, issues with the starter motor or electrical connections could prevent the vehicle from starting. It's best to conduct a thorough diagnostic check to identify the specific problem.