0
John Deere
John Deere is the leading manufacturer of agricultural machinery in the world. Questions about John Deere products and their proper operation can be asked here.
2,566 Questions
Where can i download a wiring diagram for a john deere 70 gas tractor?
Well you can search the web for Wiring Diagram John Deere 70 Gas Tractor. There is a website called yesterdaystractors that has numerous wiring diagrams that you can download from them,
Who buys from a John Deere manufacturer?
Dealers and major customers with enough clout to buy direct from the manufacturer. Hertz is one such customer, and the items they buy from John Deere and rent out through Hertz Equipment Rental come direct to them from the factory.
What is the value of 1936 John Deere B factory spoke wheels?
I just bought a fully restored one for $4000.00.
How to replace the clutch on a John Deer 4020 tractor?
How do you get into the cluch to replace it, the serial no. on our 4020 is R128822R
that's definatly your voltage regulator i had the same problem on mine
Where can you download a John Deere tractor service manual?
See the link below. Follow the bullet points to find the manual you need.
Where can you print out an operators manual for John Deere 345?
Here's the deal..why would John Deere release FREE operator's manuals to everyone? They won't, never will and anything else is plagerism and infringment of copyright law. To order a manual for a cost call Deere & Company's Distribution Center at 1-800-522-7448.
What is the weight of a John Deere 455 tractor?
John Deere says that the tractor has a weight of 965 lbs. I found this on the their website.
How do you start a cub cadet tractor?
Push in the clutch, set throttle at start turn key ,[like starting a car]
Why does a john deere tractor die out when you take the choke off?
Apparently not enough gas is getting to the engine after the choke is taken off. Things to check: (1) clogged fuel filter = restricts the amount of fuel entering the carburetor (replace); (2) carburetor adjustments = needle valve may have vibrated to a more closed (leaner) position: close needle valve and then rotate counterclockwise 1-1/2 turns to start the engine; adjust for richer mixture by turning counterclockwise until engine begins to stall due to too rich a mixture, then turn clockwise until engine starts to stall due to too lean a mixture, then set the valve halfway between the two points or to the point that makes the engine "purr" the best. (3) If this doesn't work, it's likely that the linkage may be bent and thereby preventing the throttle to open/close correctly. My question is this There is a needle valve at the top of the carb, another on the left hand side, and a screw that deals with the throttle cable...where should the throttle screw, and the other needle valve screw be set to for best starting results?
John deere gator run for a while then shuts off won't restart for about an hour?
Is it two stroke fuel that you are using? Your engine is probably flooded. Check the pump and make sure it's calibrated correctly. Also make sure that oxygen is able to mix with the gas.
What did John Deere do about the Industrial Revolution?
John Deere was a very helpful American man who successfully built the first steel plow. This was during the Industrial Revolution. This was a time when inventions were being made, one after the other.
This is some of his biography from http://www.biography.com/people/john-deere-9269591.
John Deere was born in February 1804. A blacksmith by trade, Deere determined that the wood and cast-iron plow in use at the time was ill suited to the challenges presented by prairie soil, so after some experimentation he crafted a new kind of plow and sold his first one in 1838. He had devised 10 improved plows by the following year, and 40 more the year after that. By 1857, his annual output of plows was 10,000. By 1868, Deere and his partners incorporated, founding Deere & Company. By 2012, the company's worth had climbed to more than $40 billion. Deere died on May 17, 1886.
This is an image of John Deere.
This is his steel plow.
How to set the governor on a Briggs Stratton 18 hp lawn tractor engine?
Setting the governor on a mower engine depends on whether it is a mechanical or pneumatic governor and the type of control that is used. The governor plays a very important part by keeping the engine from overspeeding and causing possible damage. I suggest you check out a book on Briggs engines at your local library and find the procedure for setting the type of governot equipped on your engine.
How do you install the spring on a discharge chute for a John Deere Sabre model 1538?
Sheer brute force I am afraid though you can simplify it a bit by getting it(the rod) through the front part of the bracket and into the coil partly before moving the back end into position and finishing.
What is the Napa cross reference to John Deere LVA 13038 oil filter?
As Of 10-4-2012 there is no cross for this filter from Napa Affina Group. WIX has not manufactured one.
Where was John stationed in dear John?
He is stationed in Germany before 9/11 and then he is moved into Afghanistan.
I have a new battery in my john deere 420 and the engine won't turn over?
Well, I have a couple of these, and they are 6 volt systems, and are POSITIVE GROUND. This means that they are reverse of the polarity found in most other vehicles. Turn the lights on if you have them, and if they go on you probably have other problems. Assuming that you have that all right,I would start with the starter switch, and that is the switch that is pressed on the actual starter when you pull the start knob from the driver's seat. There are many things it could be! It could be that you have a frozen engine(rust could be in a cylinder), or fluid such as water or gasoline could be filling one or both cylinders. If you hear the clicking of the starter, but the engine won't move, you may have a cylinder prob. I'd take out the sparkplugs(make sure you remember which wire goes with each)and try to turn it over with them out. Also, check the fuse which is on the upper end of the "dashboard". It's under a little cap that you push and twist to get off... your gray, multi position switch should make the instrument panel light come on in the third or fourth positions(all tractor lights on) if it's making contact(not if your bulb is out, of course). Good luck..they are great tractors! Treat it nicely, and you'll have it longer than any of these new ones...
How do you get air out of a John Deere 2010 hydraulic system?
Crank tractor set tractor throttle at 1500 rpm turn steering wheel all the way to the right hold it for about 10 seconds then turn it to the left and hold it for about 10 seconds repeat several times and the air should be gone
