Manufacturing

Rubber trees overcome the problem of overcrowding by producing a chemical compound called allelopathy. This compound inhibits the growth of surrounding plants, reducing competition for resources such as water, nutrients, and sunlight. Additionally, rubber trees have a deep and extensive root system that allows them to access water and nutrients from a larger area, further outcompeting neighboring plants. Lastly, rubber trees have a dense canopy that shades out smaller plants, limiting their growth and survival in the immediate vicinity.

Oh, dude, 5 gallons of soda syrup weighs around 40 pounds. So, like, if you're thinking of carrying it all at once, maybe hit the gym first. Or just order a smaller size and save yourself the trouble of feeling like you're lifting a small child every time you make a soda.

well was looking for manufacturing jobs in the colonial times which the answer is that people were tanners, women had jobs at home, and men were hunters, traders, and some even had jobs making indigo.

I Recently, I went to a new tea kettle. Saw one in Linens and Things. Picked it up, turned it over and saw "MADE IN CHINA." I thought it had a funny, unnatural sheen to it. Would like to know when REVERE went to China.

its a statistical term for standard diviation.

in normal distribution if there are six standard deviations between the process mean and the nearest specification limit, then there is a 99.99966% probability that no items will fail to meet specifications .

In six sigma 1.5 sigma correction is considered to allow the natural variation present in any process. So when we say that process is sis sigma , it is nactually 4.5 sigma.

a polythene is a plastic and in industry its use for a holding container for food, plastic shopping bag, to make bread bags, in news paper bags, to make toilet paper packaging, paper towel plastic packaging, grocery bags and air cushion bags. also they all have slightly different chemical properties.

Six Sigma Green Belt is a professional industrial engineering certification. Six Sigma Green Belt is typically for recognized workers who have undergone special training to receive this certification.

it is dishfunctional

Manufacturing Overheads = 20% of Conversion Cost

Total Conversion Cost = ?

Total Conversion Cost = Direct Labor + Manufacturing Overheads

100% = 80% + 20%

Total Conversion Cost = direct labor * 100/80

Direct labor = 38000

Total Conversion Cost = 38000 * 100/80

Total Conversion Cost = 47500

Manufacturing Cost = Total Conversion Cost - Direct Labor

Manufacturing Cost = 47500 - 38000
Manufactruring Cost = 9500

Well, darling, NAICS Code 233110 refers to "Power Distribution and Specialty Transformer Manufacturing." In simpler terms, it's the code used to classify businesses that are involved in making power distribution equipment and specialty transformers. So, if you're in the market for some high-voltage action, this is where you wanna look.

Oh, dude, a fifth of a ton is like 400 pounds. So, if you're trying to split a ton into fifths, you're looking at 2000 pounds total, and each fifth would be 400 pounds. Just think of it as a really heavy slice of cake... a cake you definitely don't want to eat in one sitting.

the solute is water and sugar and solvent is sap

The purchasing department plays a crucial role in an organization by procuring goods and services needed by other functional departments. This department works closely with departments such as finance, operations, and inventory management to ensure that the organization's needs are met efficiently and cost-effectively. Effective communication and collaboration between the purchasing department and other functional departments are essential to streamline processes, manage costs, and maintain smooth operations.

The manufacturing process of cement involves several key steps. First, raw materials such as limestone, clay, and iron ore are crushed and then heated in a rotating kiln at high temperatures. This process, known as calcination, causes the materials to combine and form a substance called clinker. The clinker is then ground into a fine powder and mixed with gypsum to produce the final product, cement. The neat sketch would typically show the various stages of crushing, heating, grinding, and mixing involved in the manufacturing process.

Cotton is an important substance in water filters as it helps catch some of the smaller particles in the water being filtered. Cotton balls are one supply regularly recommended for survival packs and camping gear, as they are lightweight and useful for just these situations (as well as first aid!)

In a manufacturing context, capitalized variances are the portion of a manufacturing variance that gets capitalized as part of the inventory values. Considering a simple start up example, suppose that in order to manaufacturer a certain quantity of finished goods, your standard or Bill of Materials (recipe) calls for $100 of raw materials to produce 10 units. Just before you start manufacturing your assistant slips and spills the $100 worth of raw materials on the floor. After picking him up off the floor and cleaning up the mess, you once again set out to make those 10 units. This time you collect the raw materials and the process flows perfectly such that you have the 10 units at what your standard cost said you should have made them for. You do no more manufacturing in the month and at the end end you have sold 5 of the 10 units. Now when you evaluate your month end inventory you realize that you have less raw materials on the shelf than your standards say you should have. You then remember the accident and try to figure out how you are going to account for the spill. If you assume your only MFG cost is materials, your Cost of Goods Produced at standard would be $100 (for the 10 units) and to account for the spill, you would have an efficiency variance (it took more materials because of the spill) of $100. Your cost of Goods Sold at standard would be $50, and then you have to figure out how much of the $100 variance you should recognize in the current period and how much of the spill is a CAPITALIZED VARIANCE. Under the accounting theory of matching, Revenue with Expense, the proper accounting is to recognixe half of the negative variance of $50 in the current month (since half of the goods produced were sold to Third parties in the month) and capitalize the remaining $50 negative variance along with the standard cost of the product on the balance sheet. When you sell the remaining 5 units, they will have a cost basis of $100 ($50 at standard and $ recognition of the $50 negative variance). This was a very simple example and other rules apply that would require certain variances that were one time in nature to be excluded from the calculations.

Well, honey, first you need to know that there are 1,728 cubic inches in a cubic foot. So, to convert cubic inches to linear feet, you divide the number of cubic inches by 1,728 to get the cubic feet, then you take the cube root of that to get the linear feet. Easy peasy lemon squeezy!

60000 + 30000 = 90000 = 60% / 60 = 1500 = 1% x 100 = 150000 = 100% X .4 = 60000

The above solution is incorrect. By definition, the conversion cost is the sum of the direct labor cost and the overhead. Therefore, if we assume x is the conversion cost, then x = 0.4x + 60,000. The solution is conversion cost = 100,000. Hence, the direct labor cost = 40,000. Note that the knowing the direct material cost is not necessary for the computation of the labor cost. I am really bad at math so i just have to think you are right on this one

Oh, dude, it's like converting apples to oranges, but with meters. To convert running meters to square meters, you just need to know the width of the material. If the width is 1 meter, then 1 running meter is equal to 1 square meter. If the width is different, you multiply the running meters by the width in meters to get the square meters. Easy peasy, lemon squeezy!

Oh, dude, you're hitting me with the fancy science terms! Yeah, so like, carbon steel is totally anisotropic. It means the properties of carbon steel can vary depending on the direction you're looking at it from. So, like, it's not all uniform and symmetrical, if that's what you're asking.

A quaker corset maker is a person, mostly occurring in the 1700s to 1800s who made women shirts to tighten their waste as a hobby or job.

Thomas Paine's, a famous American Revolutionary character's, father was a quaker corset maker. Thomas Paine once was apprenticed by his father but was rejected in his unmistakably bad talents.

Corsets were used in that time by women to tighten their waste, making them look thinner. You might have heard of how women traditionally believe how a big chest and hip area with a petite abdomen was appealing, even today.

Corsets were very dangerous to a women's health though, most women would faint because all of there stomach organs and lungs were packed so closely together they couldn't breath. Most women who wear or wore corsets have extreme physical conflicts relating to there waste.

Oh, dude, converting colors, like, who even does that? Anyway, if you really wanna do it, you can use a color conversion tool online or in design software like Adobe Illustrator. Just plug in the scotdic color code and it'll give you the closest Pantone match. Easy peasy, right?

In the case of an EPROM chip - The chip is plugged into an EPROM (Erasable Programmable Read Only Memory) machine.

Each microchip has a small amount of memory, and the EPROM machine effectively writes instructions to the chip's memory. These machines usually program large batches of chips at the same time. This set of instructions is permanent unless the chip is re-programmed.

Aerodynamic efficiency would be one reason. Also can be they change them just as a design change, in other words to better blend with the styling of the body. Or they can be change to provide better rear visibility.