Polyester

Textured polyester is a type of synthetic fabric made from polyester fibers that have been processed to create a textured surface. This texture can enhance the fabric's appearance and feel, providing added depth and interest compared to smooth polyester. Textured polyester is commonly used in apparel, upholstery, and home textiles due to its durability, resistance to wrinkles, and ease of care. Its versatility makes it a popular choice in various fashion and design applications.

I'm not sure but my husband had insulation spray foam stuck into his hair (don't ask) and we took it out completely with nail polish remover!

Also from experience you can use ACETONE and it is readily available at places like PAINT STORES AND PLACES LIKE HOME DEPOT ,LOWES , CIL PAINTS ,CANADIAN TIRE THE ACETONE WILL DISSOLVE THE FOAM IMMEDIATELY

Top polyester refers to the high-quality, staple fibers made from polyester that are typically used in textiles and fabrics, offering a soft feel and good durability. Tow polyester, on the other hand, consists of continuous filaments that are often used in applications like insulation or as reinforcement in composites. While top polyester is generally suited for clothing and upholstery, tow polyester is more commonly used in industrial and technical applications.

Carbon fiber reinforced polyester (CFRP) typically exhibits higher strength-to-weight and stiffness-to-weight ratios compared to glass reinforced polyester (GFRP), making it more suitable for applications requiring high performance and low weight. CFRP also has superior fatigue resistance and thermal stability, while GFRP is generally more cost-effective and offers better impact resistance. Additionally, CFRP can be more brittle than GFRP, which may affect its performance under certain conditions. Overall, the choice between CFRP and GFRP depends on specific application requirements, including weight, strength, and cost considerations.

Polyester is not suitable for the summer season primarily because it is a synthetic fabric that does not breathe well, leading to heat retention. Its moisture-wicking properties are limited, causing sweat to accumulate and making wearers feel uncomfortable. Additionally, polyester can trap odors, which can be unpleasant in hot weather. As a result, natural fabrics like cotton or linen are often preferred for summer wear due to their breathability and comfort.

made from plastic it's made from plastic (poly- as in polyurethene)

Yes, you can use rubber cement on polyester, but it's important to check the specific type of rubber cement and its compatibility with synthetic fabrics. Rubber cement provides a flexible bond, making it suitable for some fabric applications. However, it may not adhere well in all situations, so it's advisable to test it on a small area first to ensure it works effectively without damaging the material.

Polyester rayon cotton blends generally wear better than pure linen because they are more durable and resistant to wrinkling and fading. Linen, while breathable and lightweight, is prone to creasing and may not hold its shape as well over time. The blend combines the comfort of cotton and rayon with the resilience of polyester, making it a practical choice for everyday wear. Ultimately, the choice depends on personal preference for texture and care requirements.

I am a dog groomer and generally try and wear polyester tops as the dog hair doesn't seem to stick to them as it does when I wear cotton etc. Any hair that is still there when I get up from my seat just brushes off.

stretch it out by putting it over a chair... thats how i do it

Use hairspray on it :) Sounds crazy but really works! ;D

Micro ballistic nylon is typically stronger and more durable than 1680-denier polyester and nylon fabrics due to its tightly woven structure and higher abrasion resistance. While 1680-denier fabrics are robust and commonly used for heavy-duty applications, micro ballistic nylon offers superior tensile strength and resistance to wear and tear. This makes it a preferred choice for high-performance gear and tactical applications.

The cost of polyester in England can vary widely depending on the type and quality of the fabric, as well as the retailer. On average, basic polyester fabric can range from £5 to £15 per meter, while specialty or higher-quality polyester materials may cost more, potentially reaching £20 or higher per meter. Prices can also fluctuate based on market demand and supply chain factors. For the most accurate pricing, it's best to check with local fabric retailers or online suppliers.

amorino, cupid and putto are terms used to design naked infant children, but amorino and cupid have small wings, while putto does not have them: cupid in addition has bow and arrows.

Final occurs at or forms an end or termination, and not to be altered or undone. Finale is usually used to explain that the concluding part of any performance has been reached.
final means the last and finale means concluding part of anything

A dance ethnologist would be able to answer this better than me, so take it with a grain of salt. The Watusi is a 60s dance based on dances of the Watusi tribe in Africa (I believe they are in Rwanda). The Watusi (the dance, not the people) is distinguished by the arm movements and the fact it works on the vertical axis of the body, whereas The Frug is a dance that is distinguished by the hips moving side to side.

They are materials that have been used for hundreds of years.

hi peoples the answer is the disturbitor cap one number is 1342 and the other is 5432

There is no fundamental difference. The principal of the tarnsformer is always the same. It uses the principal that a magnetic feild can be formed by a coil. Like whise a changing magnetic field will generate a voltage in an electrical coil. The power of a transformer is defined by how much current the coil wires can carry. The thicker the wires the more current, and the lower the internal resistance. also the core of the transformer can be magnetically saturated which in return limits the power that can be transformed. The price of a tranformer is made up of labour, materials, interlectual propperty and depends on the location where it is made. In other words a large audio transformer made in the USA will be much more expensive than a small power supply transformer made in China The difference is that to manufacture of a 50 watts WE can afford to be eneficient a bit . But for a 5000w efficiency becomes a factor. Dissipating 5w is not the same as dissipating 500w. THIS IS ASUMING A 10% EFFICIENCY. And CHINA can biuld EVERY thing cheaper then the Usa Cheaper yes but not better. USA company design and subcontract these effort making money. They work for $0.75 an hour no benefits. we demand $10 with benefits and that is the story.