0
Remote Control Devices
A remote control device is commonly an infrared device used to control electronic devices such as televisions and DVD players. It is usually powered by AA or AAA size batteries.
2,009 Questions
What is the 3 digit device code for a durabrand model bh2004d?
You did not specify which equipment you have so I have provided the TV codes for DISH Network equipment. The codes are: 220, 623, 523, and 221. I have also provided instructions on how to program the remote to your TV.
- Remotes: Basic (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Enter the three-digit code using the buttons on the number pad.
- Press #. Note: The LED will flash three times.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
What is the purpose of the remote control codes for Sky TV?
Sky is a brand that has made TV boxes and even broadband boxes. The Sky remote makes use of a "code" to operate the Sky box and the operator's TV, meaning that the operator only needs one remote to handle all Sky functions, including turning the TV on and off.
How do you program your VCR without the remote?
Most remote controls come with codes for TVs, DVDs and cable boxes. You can also check the remote control manufactures web page. I find it is better to just buy a universal remote control, that way I can program multiple devices on one remote control.
How do you program a sears craftsman garage door opener 139.53879?
If you want to add a remote, press the "set" button on the power unit until the green light blinks, then press the button on the remote. If you want the unit to forget all old codes and accept only the new remote, hold the "set" button until the green light stays on solid, then press the remote button.
What is the code for Emerson tv for a Emerson jumbo remote?
I also have a Toshiba TV...the codes listed in the flyer supplied are...
013
049
098
105
109
117
118
120
159
178
109 was the correct one for my specific model of Toshiba TV
What are the codes for a proscan tv remote?
I had the same problem with my proscan 40lc45s and the remote from comcast. I called proscan at 888-977-6722. They were very helpful. Codes 10178, 10029, 10030 and 10019 all worked. Hope this helps
What are the remote code for an Emerson TV?
Try 1465. However, you will still have to use your other remote to turn your TV on. :-(
What are the sanyo tv remote codes for the rca crk74b1 universal remote?
Sanyo TV codes are 10054 and 11142.
See the related link below.
What is the code for Philips sound bar css2133b?
You may try these codes: 0177, 0083, 0983, 0084, 0184, 0277, 0377
Try these one also 1214, 0598, 0277, 0298, 0442
If all else fail, try 9999 and 0000.
If by chance it still does not work, it means the universal remote is not compatible with the sound bar.
What is the universal remote control code for Emerson Dora tv set with model number DTE316?
Dish Network-722 but i tried it but it didnt work
Why do we use remote controllers?
They both use an "RF" control, something similar to an SOS signal on a boat.
Where can i find Codes for a GE universal remote?
GE remote controls are distributed by Jasco. The remote control manuals can be found and downloaded from their site at the link below.
What is universal remote code for HP BD-2000?
wish I knew I contacted hp and Shaw support Ill let you know if I find anything out. There is no code.
What if you do not know the model number of your RCA universal remote?
Well you cannot get arrested for not knowing it nor is the lack harmful.
Such codes are generated by the universal remote manufacturer rather than the TV manufacturer. As such, the actual codes will differ from one remote to another. Regretfully, Olevia TV's (for the most part) use proprietary infrared frequencies. This means that the code for another TV brand will not work with Olevia TV's. If you are looking for a universal remote, Olevia made a learning remote (model RC-LRN). Amergence Technology Inc. sells them for 39.99. They can be reached at 866-965-3842.
I don't show a code yet for that brand of TV, however, you can perform a power scan to see if you can find a code on the remote that will work. I have provided the power scan instructions.
Remote: Basic Remote (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Press and release the red TV Power button.
- Press and release the Up or Down Arrow button once every second on the remote until the television turns off.
- After the television turns off, press and release the OK button.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Just did some research and found that SEIKI is made in LG so I used a LG code on my dish and it worked the code that worked for me was 718 hopes this helps others
What is the remote code for an sansonic converter box with an comcast remote?
The correct code is tv mode actually toshiba 5102 although does not give any options other than volume & channel up and down and off on I have yet to configure how to retain auto scan options
What is the remote control code for samsung tv un46fh6030f?
I have provided the codes and instructions on programming your DISH remote to your Samsung TV.
Remote codes: 738, 680, 516, 833, 369, 526, or 573.
- Remotes: Basic (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Enter the three-digit code using the buttons on the number pad.
- Press #. Note: The LED will flash three times.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
What are the GE universal remote codes for a Sylvania TV?
You can consult your instruction manual (the list is usually a separate document) or contact Jasco Products Company support at 1-800-643-8483 Monday - Friday, 7:30am - 5:00pm (CST). Jasco Products Company is licensed to handle GE products and accessories.
