Saab

To change the breather box in a 2003 Saab 9-3, first ensure the engine is cool and disconnect the negative battery terminal. Remove the engine cover and disconnect any hoses or electrical connectors attached to the breather box. Unscrew the mounting bolts holding the breather box in place, then lift it out and replace it with the new unit, reattaching all hoses and connectors, and finally reinstall the engine cover and reconnect the battery. Always double-check for any leaks or loose connections after the replacement.

i have the blower shrod out and the top of the radiator undone on my 99 Saab 93 but i cant seem to figure out how to undo the bottom of the radiator...the two brackets that are holdn the bottom of the radiator down seem to be unaccessable any help would be appreciated i have been tryn for two days now plz help[

Yes, I think so.

open the hood, there is a yellow cap says oil its on the cap the same place you refill the oil.

...gee, on my 95 900-se convertible it said "7IO" on the cap, which by the way is large, as it's also where you can add OIL, or in my case, add 7IO. (sorry, couldn't resist!)

where is ignt.mod. location

After popping the hood start with the passenger side headlight because this is the easier one since it is not in as tight of a spot. after taking off the black rubber cover simply turn the half dollar sized silver plate the bulb is on, it takes a solid turn to get it to click out.. the driver side is a bit tight, and usually get my knuckles torn up quite a bit, try and find someone with strong small hands if possible.. =) good luck

It is on the positive battery cable at the terminal. It is the little black box with the yellow button.

Sweden <333333333

Anywhere from free to One Million. It depends on who is doing the work, what tools they have available, experience, the shop rate, and the local currency.

us Cclamp to retract caliper leave old brake pad in place put clamp over caliper with 1 end on brake pad and the other over caliper back start to tighten very simple.

If I remember correctly it will be located at the bottom of the windshield under the cowl assembly and you will need to remove the wiper arms and the cowl to remove this............

Front.

No as a tech2 is needed to programme the chasiss number into the vehicle and keys all requiring tech2

pour sortir un alternateur sur une saab 900 1996 doit-on le sortir par le haut ou par le bas?

GM does not own Saab any longer. Spyker owns it now but any Saab dealer, even if they sell GM cars should be able to.

Trouble code P1312 means: Combustion Detection Cyl. 1 2 - Open Circuit/Short to Power

Trouble code P1334 means: Combustion Detection Cyl. 3 + 4. Open Circuit / Short to B +.

There are 3 step to repair p1312 error

If you got p1312 error then there is a 94% chance that your computer has registry problems. To repair p1312 error you need to follow the steps below:

* Step 1 - Download a p1312 error repair tool,install this error repair tool.

* Step 2 - Click the Repair All Button.It will scan you PC for Free.

* Step 3 - Then click the Repair All Button again and your done! It is very easy to repair p1312 error.

Here are the URL of p1312 error repair tool:

http://www.fixerrorsafe.com/ttfix-p1312_error-zz0005

DISREGARD THIS STUFF ABOVE BECAUSE THIS GUY/GAL SOMEHOW THINKS WE ARE TALKING ABOUT AN ERROR CODE ON A COMPUTER NOT AN AUTOMOBILE.

IF YOU GO TO THE URL LISTED IT TALKS ONLY ABOUT FIXING A LAPTOP OR DESKTOP COMPUTER SOFTWARE ERROR

which alarm? if it the security alarm then its because all the doors are not unlocked when they are being opended and if you pop your trunk but the doors are not unlocked it will do the same.

Trollhattan, Sweden.

You have to replace the front hub. The bearing is press-fit into the hub, and you cannot order it separately. Several hundred dollars for the part, plus labor.

In the fuel tank. If you will pull the bottom back seat up you will see a circle of carpet, pullthat up and remove the coffee canned size metal disk off and you will see the fuel pump assembly. Take care when removing the lines or you will break the plastic fuel reurn and entry line housings and they are expensive and hard to locate.

your vin number is driverside left corner top of the dash

How do you turn on the high beams. I see it is in the left blinker place but it wont stay on I have to hold it forward...help

Sweden

195-60-16

Repairing this almost always fails, buying a new or used block would be a much better way to go.