answersLogoWhite

0

❓

The Difference Between

Ever wanted to know the difference between a boysenberry and a blueberry? socialism and communism? Windows and Linux? Look no further. This category answers your questions about 'The Differences Between...'

57,566 Questions

What is the Difference between stone and rocks?

Stones are small pieces of rock or mineral, while rocks are larger masses composed of one or more minerals. Rocks can be made up of multiple stones, and stones are usually smaller and can be easily picked up or moved.

What Is The Difference Between Water And Air?

The following are a few differences between water and air (there are many more): Water is a liquid and air is a gas Water is a compound consisting of 2 parts hydrogen atoms and 1 part oxygen atoms, and air is about 79% nitrogen gas and 20% oxygen, plus small amounts of many other gases. The volume of water changes very little with changes in temperature and pressure, and the volume of air changes in direct proportion to temperature and pressure changes Water is odorless and air has an aroma depending upon the substances in it.

What is the difference between discovery science and hypothesis based science?

the difference between discovery science and experimental science is. when we say "discovery science" is comes from the word itself "discovered" it is first discovered by a certain person. when we say "experimental" it comes from the word it self "experiment", people tried to make things that are new . :)

What are Difference between a spanned volume and a striped volume?

A spanned volume combines multiple disks into a single logical volume, allowing data to span across them sequentially. A striped volume also uses multiple disks, but data is written across the disks in stripes (block-level striping), improving performance by spreading data access across multiple disks. However, in a striped volume, a loss of a single disk can result in data loss for the entire volume.

What is the difference between voltametry and amperometry?

An amperometry measures a current at a fixed applied potential, that is at one point on the current-voltage curve. But in voltammetry it records a number of points on, or a chosen region of the current voltage profile. Thus an amperometry is a fixed-potential voltammetry.

submitted by;

Jas Raj Subba

PSU

What are the differences between the euglena ameba and volvox?

An euglena has a flagellum; a volvox does not. A volvox has a gonidium; an euglena doesn't. An euglena has a stigma; a volvoxdoes not.a volvox has a lot of characteristics an euglena does not, and an euglena has a lot of characteristics a volvox does not. Unfortuneatly, I do not know the rest of the other unique characteristics that a volvox, or an euglena has that are different from each other. You must go to google to find the rest. Or bing, or ask.com.

Difference between charcoal and stone like coal?

Charcoal is produced by heating wood in a low-oxygen environment, whereas coal is a naturally occurring solid fossil fuel made from ancient plant matter. Charcoal is often used for cooking and art, while coal is primarily used for energy production. Charcoal burns cleaner than coal and produces less pollution.

What is the difference between pco2 and paco2?

PCO2 refers to the partial pressure of carbon dioxide in the blood, while PaCO2 specifically refers to the partial pressure of carbon dioxide in arterial blood. Arterial blood is the blood that has been oxygenated in the lungs and is then circulated to the rest of the body. The PaCO2 measurement is more precise and important in clinical assessments compared to just PCO2.

What is the difference between absorbance and transmittance?

Absorbance measures the amount of light absorbed by a sample, while transmittance measures the amount of light that passes through a sample. Absorbance is calculated as -log(T), where T is transmittance. Absorbance is commonly used in spectrophotometry to quantify the concentration of a substance in a solution.

Is there a difference between KW and kW?

Answer

KiloWatt hours. Its a measure of energy use. It is the amount of power used over time.

Energy is the ability to do work, while power is the rate at which work is done.

Your water heater may have a power rating of 5 kW. If it runs for 8 hours in a day, you would use 40 kWh of energy doing the work of heating the water.

What is the difference between Brahma and brahman?

1. Brahma is one of the seven basic gods of Hinduism. The seven basic gods are Indra, Shakti, Brahma, Vishnu, Shiva, Shani and Yama.

Brahman is the supreme god of Hinduism and the the seven basic gods are supposed to originate from it.

2. Brahma is supposed to be the creator who has created the entire universe and all the living beings in it.

Brahman has the knowledge of the entire universe in it in a highly condensed form

3. Brahma is symbolic of the voluntary force. This is a small, transient and controllable force that works on reasoning and ideally suited to experiment anything new. Thus, Brahma force enables us to make small but reliable progress in our new life.

Brahman is symbolic of the involuntary force. This is a mighty, eternal and uncontrollable force that works on logic. We use this force to make our immaculate life eternal.

4. Brahma divides our devastated life into small, infinite and independent compartments, thus enabling us to salvage usable parts of our devastated life and discard unusable parts. It also enables us to have a new status based on very few activities.

Brahman merges all the activities into a single giant activity called life and automatically rectifies all the problems in our life.

5. Since Brahma (Voluntary) force looks at differences only it creates an illusion that we have very vast knowledge.

Brahman (Involuntary force) looks at similarities only and thus it gives us a feeling that our knowledge is minute.

6. Brahma makes our life independent of our status.

Brahman gives us a status determined by our average skill.

7. Brahma is not worshiped usually because it encourages us to lead a new, parallel, and often bad life independent of our regular life. This bad parallel life is symbolized by demons.

Brahman is usually not worshiped because it prevents us from taking undue advantages, takes away our ability to change and gives a very low status. Thus, Brahman is not a layman's god.

8. Among all the Hindu gods, Brahma gives the highest status because our status would be determined by our skill in just one activity.

Brahman gives us the lowest status because it determines our status by our average skill.

9. Brahma is the first god we worship when we restart our life after it is devastated completely after a catastrophe. Since voluntary force gives us the ability to change Brahma is our obvious choice.

Brahman is the last god we worship after our life has become almost perfect and there is no further scope for improvement. Brahman (involuntary) force automatically makes our almost perfect life immaculate and then takes away our ability to change.

What are the differences between boiling and evaporation?

Boiling- i) It is a bulk phenomena.

ii) The substance changes it's state only at it's boiling point.

iii) It doesn't give a cooling effect.

Evaporation- i) It is a surface phenomena.

ii) The substance does not change only at it's boiling point.

iii) It gives a cooling effect.
EVAPORATION

  • evaporation takes place silently
  • it takes place at all temp.
  • its a natural process
  • it takes place only on surface
  • rate of evaporation depends on area of free surface

BOILING

  • its associated with characteristic sound
  • its takes place at all temp.
  • to be heated for boiling
  • at constant temp. boiling takes place
  • boiling takes place at all regions of liquid
  • it does not depend on free surface

What are the differences between mixture and suspension?

A mixture is a combination of two or more substances that are mixed together but can be separated easily, while a suspension is a mixture in which particles are dispersed in a liquid but do not dissolve and settle out over time. Suspensions are heterogeneous mixtures, while mixtures can be homogeneous or heterogeneous.

How is activation energy occur in daily life?

Activation energy is encountered in daily life when starting a fire – a certain amount of initial energy is required to ignite the material. Another example is cooking food, where heat energy is needed to reach a specific temperature for a chemical reaction to occur, like in baking a cake or boiling water. In general, any process that requires an input of energy to initiate a reaction or change involves activation energy.

What is the difference between friction and gravity?

Friction is a force that opposes the relative motion of two surfaces in contact, while gravity is a force of attraction between masses. Friction acts parallel to the surfaces in contact, while gravity acts vertically downward towards the center of the Earth. Friction can be reduced by using lubricants or smoother surfaces, whereas gravity is a constant force that cannot be eliminated.

What is the difference between static weight and dynamic weight?

Static weight is the weight of an object when it is not in motion, while dynamic weight takes into account the additional forces acting on an object when it is in motion, such as inertia and acceleration. Dynamic weight can be greater than static weight due to these additional forces.

Difference between 12volt armature and 24 volt armature?

The main difference between a 12-volt armature and a 24-volt armature is the voltage rating at which they operate. A 12-volt armature is designed to run on a 12-volt electrical system, while a 24-volt armature is designed for a 24-volt electrical system. This difference determines the power and speed capabilities of the armature when used in electrical devices.

What is the difference between cell and tissue?

Isn't it obvious? Cells are places in prisons where they keep prisoners, or people that have done something wrong, and tissues are a substance of material that you blow your nose in when you have a cold.I would have thought that obvious to everyone!Cells are a jelly-like substance inside us humans. They are the CORE of us humans. When we are a nucleas inside our mothers womb, we are made up of only stem cells. Now, stem cells are extremly special, as they can change into any other cell in your body. So, what happens is, when you start developing, some of these cells change into brains cells, some into blood cells, or maybe skin cells, and if you're a boy, sperm cells also. We have millions of cells inside us.As for tissues, it's easy to understand as long as you understand the cells. Tissues are a group of the same cells. Once again, we have millions of TISSUES inside us. These are extremly important, as without these, our whole body wouldn't work.I know you didn't ask for more than that, but I'll give you more...Onto Organs: Organs can't work alone, can they? Your heart wouldn't work without the blood cells, (blood), as the heart would have nothing to pump around. But Organs also can't work without other Organs. Taking the heart for another example, the heart wouldn't work without the lungs, because lungs help us breathe, helping the heart pump. The brain is also an Organ, and without it, NONE of us would work, as when the brain shuts down, so does our WHOLE body.So, to make our body work, we have to have Organ Systems. Like the digestive system. That is a group of Organs working together to digest our food.I hope I helped you. And remember, I'm only eleven! I would like to thank Mr Shufflebotham for teaching me this, and I want to say HI to Molly F, Jack G, George S, Jack D, Oscar B, and of course, ME! Hehe!

How do an atom and a molecule differ?

An atom is the smallest unit of an element that retains its properties, consisting of a nucleus of protons and neutrons surrounded by electrons. A molecule is a group of atoms held together by chemical bonds, forming a distinct structural unit. Therefore, atoms are the building blocks of molecules.

The difference between fungi and parasite?

Fungi are a group of organisms that obtain nutrients by breaking down dead organic matter or by forming symbiotic relationships, while parasites are organisms that live on or in a host organism and rely on the host for nutrients, sometimes causing harm to the host. Fungi have a wide range of ecological roles, while parasites are specialized in relying on a host for survival.

What is the difference between blue and red?

Blue and red are different colors on the visible light spectrum. Blue has a shorter wavelength and is often associated with calmness and tranquility. Red has a longer wavelength and is often associated with energy and passion.

What is the difference between explosive and implosive?

Explosive is when forces push objects outward. Example; The house exploded in when the gas main ruptured.
Implosive is when forces pull objects in. Example; Old structures are usually imploded to avoid damage to surrounding buildings.

What is the difference between community and population?

COMMUNITY: the populations of different species that interact in some way are called a community.

POPULATION: all of the individuals of one species that live in the same area at that same time make up a population.

What is bigger a tidal wave or a tsunami?

A tsunami is typically larger and more powerful than a tidal wave. Tsunamis are typically caused by underwater earthquakes, volcanic eruptions, or landslides, whereas tidal waves are caused by the gravitational pull of the moon and sun. Tsunamis can travel across entire ocean basins and can cause widespread devastation when they reach land.