0
Toyota Tacoma
Named after Tacoma City, Washington, USA, the Tacoma is a pickup truck manufactured by Toyota Motor Corporation from 1995 to the present. This vehicle is available in 4-door crew cab and 2-door regular cab body styles.
500 Questions
Where is the rear oxygen sensor in a 1995 Toyota Tacoma Xtracab 2WD 5 speed manual?
Asked by Wiki User
I have a 1997 and a 1998 tacoma and I had to change that same sensor on both of them so that it can pass smog and on both of the cars they were on the exhaust right after the catalic converter. It is bolted down into the pipe (Just so you know, it was a pain to take of. I had to take out of both the exhausts just to get to the sensor).
Your 1995 Aspire's airbag light blinks code 34 is this a serious problem?
Asked by Wiki User
Any SRS warning light with a corresponding code is serious. Take it to a professional as this is not a DIY repair.
What is towing capacity for 2004 tacoma extended cab?
Asked by Wiki User
trailer weight of a 2004 tacoma xtracab is:
4 cylinder standard/maximum 3,500/3,500
v6 standard/maximum: 3,500/5000 with 5,000 tow package with Class III hitch
How do you replace the key tumbler in a 1998 Tacoma?
Asked by Wiki User
How_do_you_remove_the_key_cylinder_in_a_98_Toyota_tacoma
What is the Cylinder Arrangement on V6 Tacoma?
Asked by Wiki User
Firing order is 1-2-3-4-5-6 Cylinders are front to rear of engine on passenger side 1-3-5 and on drivers side 2-4-6.
Where are the fusible links if any in a '96 Toyota Tacoma 2wheel drive V-6 automatic?
Asked by Wiki User
If there is a fusible link in the truck, or just under the hood, it would be connected to your fuse box and attached to your positive terminal on the battery.
How many quarts of oil in 2006 Toyota tacoma 2.7 liter?
Asked by Wiki User
The answer is 5.8 quarts when totaly dry, but most will take only 5 to 5.4 when changing the oil. "ALLDATA" lists; Engine Oil Capacity Specifications Refill with filter -----5.8 quarts Without filter ------5.0 quarts NOTE: listed capacities are approximate. Check fluid level after filling. Easier to add rather than subtract.....
Why doesmy fan turn on and off on a 2000 eclipse repeditly when my air con is on?
Asked by Wiki User
IT IS NORMAL FOR IT TO CYCLE LIKE EVERY 20 OR 30 SECONDS IT AUTOMATICALY COMES ON WHEN THE AC COMPRESSOR IS ENGAGED
How do you get the harmonic balancer off a 96 Toyota tacoma?
Asked by Wiki User
take off the fan shroud and there is one bolt holding the balancer on, its easy.
What would cause the A4LD transmission to stop shifting and lose power?
Asked by Wiki User
the shaft inside the tranny is broke.
What do you do for 75000 mile tune up on 2001 tacoma?
Asked by Wiki User
oil change and rotate tires if you havent done so...
most people do a oil change every 5000 miles Toyota usually recommends 7500 miles
and tire rotation should be done every 10,000 miles
How do I remove the outside temp and compass on 2005 Tacoma?
Asked by Wiki User
The accessory meter (this is what Toyota calls the ambient temp / compass display) can be removed:
1.) Remove the screw inside the sunglasses compartment. (1 Philips head screw)
2.) Disengage the 2 clips and 3 plastic claws. The locking claws are on the screw end of the console, so you must to gently pull down on the end closest to the windshield where the two clips are. Be careful, it can 'pop' out suddenly. Go slow and make sure you don't yank out the wiring.
3.) Disconnect the accessory meter connector and map lamp connector.
Next, remove the 3 T10 size torx screws that hold the display screen (accessory meter) in.
On the circuit board, there are two surface mount resistors labeled "510". What this means is 51 ohm, as the '0' is the multiplier value.
These two resistors have too much current running through them, so they tend to overheat and the solder pads crack and break over time. This is a known design flaw, and exists in other makes / models of vehicles with this type of display.
Many people are resoldering these as a temporary fix...note that due to oxidation of the resistors the solder won't reflow properly so the repair generally won't last long.
Simply 'rubbing' the resistors to temporarily fix this issue is not a good idea. You will be pulling the unit down and repairing it immediately.
See this guide link below (under 'Sources and Related Links') for a correct do-it-yourself repair, or use a search engine to find a service to professionally repair your display. Repairs and sometimes replacement modules can be found on large auction sites (note that replacement displays will sometimes have the same issue) If your vehicle is under warranty, take it to a dealership and don't attempt any repairs yourself.
How do you replace the flywheel for automatic trans for Toyota truck?
Asked by Wiki User
Short answer: pull transmission and torque convertor out of vehicle and the flywheel is bolted to the rear of the crankshaft, unbolt and pull off, reverse all to re assemble. Did your flywheel loose teeth? And as such the starter will not engage? That is about the only reason just a flywheel alone on an automatic would need to be replaced.
If you need step by step instructions on how to change the flywheel, it is a long explanation, that I will be happy to write. Do not attempt to do this if you don't have a good tool set, need not be like a professional but pretty decent set. proper jackstands also, you will be under the vehicle a while. A helper will save you a LOT of time. Write me at this email: ruffy@bak.rr.com if you really need instructions and I will , well, literally spell it out for you. I have done several of these jobs and know how. All I ask is no junk mail from others sent to that address. I am happy to help.
Where do you check the clutch fluid on a 1997 suzuki sidekick?
Asked by Wiki User
Edit by Acker_dackerly:
In 1996, Suzuki started selling a larger version of the Sidekick called the Sidekick Sport. Besides a larger engine (1.8 I4 followed by a 2.0 I4), they were also equipped with a Hydraulic clutch. The hydraulic clutch fluid vessel is to the left of the brake master cylinder on the firewall. It is a translucent white container about the size of a large pill bottle. You can use brake fluid or clutch fluid to top it off.
- Ack
The material following this text (after the string of hypens) was NOT published by me and represents the writings of someone who merely "thinks" he knows everything.
Observe the word "suicide" in his/her second sentence. This is a sure sign of someone who has assumed that the Tracker/Sidekick are dangerous vehicles. The irony to this is the fact that it was the Suzuki Samurai (not the next-gen Sidekick/Tracker!) that Consumers Union claimed was an unsafe vehicle despite their own original testing and the observations of numerous vehicle safety agencies to the otherwise.
If you don't "KNOW" something about a topic, it is best to keep one's piehole shut. This would - at least microsopically - add to the overall reliability of the information found on the Internet...
------------------------------
As I recall, the sidekick/suicide/tracker uses a cable clutch linkage. Clutch fluid is only used with a hydraulic clutch.
If you have a cable clutch, and if you have low clutch pedal or excessive clutch pedal freeplay (more than 1/2 inch is excessive less than 1/4 inch is insufficient) check for adjustment at clutch fork lever end of clutch cable near righthand side front of transmission.
On these vehicles, a locknut isn't used so it is common for an adjustment nut to back off (loosen) on the cable end. If loose, tighten until freeplay is normal and then consider using a locknut (get a nut from the hardware store for under $1) or use a drop of thread locking compound (under $2.50 at most auto parts stores) to keep the adjusting nut in place.
Also consider the possibility of an excessively worn input shaft bearing or worn clutch fork or worn throwout (release) bearing or pivot.
Toyota Tacoma check engine?
Asked by Wiki User
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle.
Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions.
If the check engine light is flashing a misfire has been detected
Flasher location on1984 mercury?
Asked by Wiki User
Flasher location for the 1984 merc is in the fuse panal; most likely under the dash to the right of the steering wheel coluum. It's been a while since I owned this one..
If not in that location try under the hood on right side looking toward the windshield. Usually in a rectangular black bos. Just unsnap and open. Be sure to secure the bos cover when done.
Oh, referance the actual location via your car owner manual. If lost look it up at alldata.com.
have fun........... Flasher location for the 1984 merc is in the fuse panal; most likely under the dash to the left of the steering wheel coluum. It's been a while since I owned this one..
If not in that location try under the hood on right side looking toward the windshield. Usually in a rectangular black box. Just unsnap and open. Be sure to secure the bos cover when done.
Oh, referance the actual location via your car owner manual. If lost look it up at alldata.com.
have fun...........
You've change outer speed sensor and inner speed sensor change fluid and filter and the car still is limp mode this is what codes said to do can and help you on a 1997 Dodge Intrepid 3.5L?
Asked by Wiki User
I had this happen. You need to make sure you disconnect the negative battery cable. Wait a few minutes and reconnect. This is needed to reset the "computer". Then drive it. If it returns to limp mode, repeat the above and it will eventually return to normal shifting.
Where is the flasher for a 1999 cougar?
Asked by Wiki User
If you take the steering column covers(right before the dashboard)off it will be on the left side right under the signal light switch. It gets plugged in towards the driver( the connector is facing the engine.
