answersLogoWhite

0

🧩

Toys

Toys, whether used for diversion or education, provide hours of fun. From the simplest of baby toys to RC airplanes, toys are what makes life fun!

11,755 Questions

What was the coolest pinball machine in history?

there is a bad told tale about: a huge pinball machine, that you enter inside the ball.

and two friends hit it with the pin or whatever the people calls. they said: it travels around the globe in: amusement parks, fun parks, carnivals and circuses. but never comes in my town, but you can search for a list of the places they intended visit

What causes the air pressure inside an inflated balloon?

The elastic contraction of the rubber in the balloon's membrane causes the pressure in the air inside an inflated balloon.

When you inflate a balloon, you have to expand the latex of the balloon, which stretches when filled with air from a pressure of 760 mm Hg to as high as 840 (about 10% higher than standard atmospheric pressure). If you inflate a non-elastic mylar balloon, it takes no effort: the air inside is at the same pressure as the air outside.

Where is the carnival in round rock?

The carnival in Round Rock is typically held at the Old Settlers Park during specific events or festivals. It's best to check the official Round Rock city website or local event listings for exact dates and location.

Which of these is a zone in which one plate is pushed down into the mantle underneath another plate?

This is known as a subduction zone. It is where one tectonic plate is forced beneath another due to tectonic forces, resulting in the recycling of crustal material back into the mantle. These zones are often associated with deep ocean trenches and volcanic arcs.

How do you make bouncy balls with borax?

  1. In this one you'll need: glue, borax, food coloring, cornstarch, and warm water
  2. In one cup, combine the warm water, cornstarch and borax. In another cup or bowl, put the glue.
  3. Next, add several drops of food coloring to the white glue and stir well.
  4. Give your water/borax/cornstarch mixture a good stir to combine all the ingredients (the cornstarch has a tendency to settle on the bottom). Then pour the water mixture into the colored glue.
  5. Stir and you'll see it immediately start to clump together. Stir a bit more until you have one big, slimy glob.
  6. Take the glob out of the liquid and begin rolling it between the palms of your hands to form a ball. It'll be sticky at first, so keep a paper towel handy to wipe off your hands occasionally. Soon a rubbery ball will form. (We found that just using our palms seemed to work better than using our whole hands and fingers.)
  7. Once the stickiness is gone and you have a nice smooth ball, that's it! You can bounce away!

The balls will flatten out after sitting for a while, but storing them in small plastic containers and then rolling them between your palms again will help the super bouncy balls regain their shape.

This is what you'll need: borax (found in the laundry section of the store)

  • cornstarch (found in the baking section of the store)
  • white glue (e.g., Elmer's glue - makes an opaque ball) or blue or clear school glue (makes a translucent ball)
  • warm water
  • food coloring (optional)
  • measuring spoons
  • spoon or craft stick to stir the mixture
  • 2 small plastic cups or other containers for mixing
  • marking pen
  • watch with a second hand
  • metric ruler
  • zip-lock plastic baggie
  • 1. Label one cup 'Borax Solution' and the other cup 'Ball Mixture'.
  • 2. Pour 2 tablespoons warm water and 1/2 teaspoon borax powder into the cup labeled 'Borax Solution'. Stir the mixture to dissolve the borax. Add food coloring, if desired.
  • 3. Pour 1 tablespoon of glue into the cup labeled 'Ball Mixture'. Add 1/2 teaspoon of the borax solution you just made and 1 tablespoon of cornstarch. Do not stir.
  • 4. Allow the ingredients to interact on their own for 10-15 seconds and then stir them together to fully mix.
  • 5. Once the mixture becomes impossible to stir, take it out of the cup and start molding the ball with your hands.The ball will start out sticky and messy, but will solidify as you knead it. Once the ball is less sticky, go ahead and bounce it! You can store your plastic ball in a sealed Ziploc bag when you are finished playing with it. Don't eat the materials used to make the ball or the ball itself. Wash your work area, utensils, and hands when you have completed this activity
  1. .
  2. Hope this helps!

When you hold a yo-yo in your hand what kind of energy does the yo-yo have?

When you hold a yo-yo in your hand, it has potential energy due to its position above the ground. This potential energy would transform into kinetic energy as the yo-yo falls and unwinds when released.

How do you win in a snowball fight?

To win a snowball fight, aim for your opponent's body, particularly their torso or head. Move quickly and stay agile to avoid getting hit. Use teamwork and strategic positioning to outnumber and outmaneuver your opponents.

What is the mass of silly putty?

Silly putty was made for rubber in world war 1. They made it by acident too.

What is the density of a wooden yo-yo?

The density of a wooden yo-yo can vary depending on the type of wood used and the specific dimensions of the yo-yo. However, on average, the density of wood is around 0.5-0.8 grams per cubic centimeter.

Where to find Amargo fossils?

Amargo fossils can be found in certain regions of South America, particularly in Argentina and Brazil. They are often discovered in sedimentary rock formations that date back to the Late Cretaceous period, about 70-80 million years ago. Paleontological sites such as Neuquén in Argentina are known for having yielded Amargo fossils.

How do you get hurricane in steel sentinels?

To obtain Hurricane in Steel Sentinels, you need to engage in naval combat and defeat the Steel Sentinels faction at sea. Once you defeat them, there is a chance that a Steel Sentinels ship may drop the Hurricane schematic as loot. Keep battling the faction in naval combat until you obtain the blueprint.

Are LEGO magnet mini figures just ordinary LEGO mini figures?

LEGO magnet mini figures are similar to ordinary LEGO mini figures, but they are attached to a magnet base. This allows them to stick to magnetic surfaces like refrigerators. They can also be detached from the base and used as regular mini figures in LEGO play.

What forces are used for a rubber duck to float?

The two main forces that allow a rubber duck to float are buoyancy and gravity. The buoyant force exerted by the water on the duck is greater than the force of gravity pulling it down, allowing it to stay afloat on the surface of the water.

What portion of the plasma membrane are made up of fatty acids?

Approximately 50% of the plasma membrane is made up of fatty acids, which are essential components of phospholipids forming the lipid bilayer of the membrane. These fatty acids provide the plasma membrane with flexibility and help regulate its fluidity.

What is the name of the person who cares for nature?

A person who cares for nature is often referred to as a naturalist or an environmentalist. These individuals work to protect and preserve the environment, conserve wildlife, and promote sustainable practices to ensure the health of the planet.

Is there a alley marble in a game of marbles?

An alley marble, also known as a large shooter marble, is typically used in games of marbles to shoot smaller marbles. It is often the marble used to start the game by knocking other marbles out of a circle or target area.

What force causes a yo yo to slow down and stop?

The main force that causes a yo-yo to slow down and stop is friction between the yo-yo string and the axle of the yo-yo. As the string rubs against the axle, it generates heat and dissipation of energy, leading to a decrease in the yo-yo's rotational motion until it comes to a halt.

How do you make it harder for a balloon to pop?

To make it harder for a balloon to pop, you can try inflating it less so there is less internal pressure, using a thicker balloon material, or keeping it away from sharp objects or rough surfaces. Additionally, avoiding overinflating the balloon and handling it gently can also help prevent it from popping.

Why doesn't silly putty break when pulled slowly?

Silly Putty is a non-Newtonian fluid, meaning its viscosity changes with stress. When pulled slowly, the molecules have time to align and flow, giving it its stretchy and elastic properties. This allows it to deform without breaking, similar to how some types of gum or dough behave.

What are the ingredients in gelli baff jelly bath and can you easily make it from the kitchen cupboard?

I tried making Gelli Baff and managed to make my own one, i used:

Sugar, food colouring (of your choice), bicarbonate of soda, milk powder and a small amount of water.

if you leave it to stand for a few hours it should go to the right substance.

In Pokemon emarld where is doven he research on reviving Pokemon fossils?

In Pokemon Emerald, the researcher on reviving Pokemon fossils is located in the Fossil Maniac's house in Fallarbor Town. You can find him by entering the house and interacting with him to revive fossils into Pokemon.

What happened to the wavelength and frequency when you increased the rate at which the spring toy moved left and right?

When you increase the rate at which the spring toy moves left and right, the frequency of the wave it generates also increases because each oscillation completes in a shorter time. This results in a shorter wavelength since the distance between successive crests (or troughs) of the wave decreases as the frequency increases.

What was the first gaming system ever made?

The magnavox was the first gaming console ever made. It was released in 1973ish and could only play one game, "Pong". Many people also think that a one game console doesn't count and that Atari was the first real console.

What force is used on a yo-yo?

The force used on a yo-yo is tension, which comes from the string being pulled or released by the user. This tension creates the motion of the yo-yo spinning and moving up or down. Additionally, gravity also plays a role in pulling the yo-yo downward.

How do you make a Beyblade spin forever?

To make a Beyblade spin for a longer time, you can launch it with more power, adjust the launch angle to minimize friction with the stadium, and ensure the Beyblade is well balanced. Additionally, using a high-quality, well-maintained tip can also help it spin longer.