Windows XP

If you want to merget the subtitle to the movie, try total video converter which has a filter for subutitle.

download vlc media player open it (the player not the file) select file open file(not quick open file) in the file tab for it will be as the following

Open: Browse

use a subtitles file: Check the box Advanced Settings:

File : Browse

first select browse on the first line and choose your media file

then check the box in the second line and choose your subtitle file.

but after you close the player and open the media file again you have to repeat the steps

The Graboid is a fictional species of sandworm that acts as the primary antagonist of the Tremors franchise. The creature made its debut in the 1990 film Tremors, and reappeared in its four sequels and the Tremors television series.

You will have to remove the old varnish in it and make its surface smooth with the use of a sand paper and refinish it with a lighter colored finish. You may use Linoleum for that as they are good for polishing the outdoor furniture.

It's a rating for the sensitivity of the film to light. The higher the number, the more sensitive. For digital, it represents a corresponding increase in the sensitivity of the ccd (the image capturing device). Either way, higher numbers trade off image quality for speed.

You need to plug an auxiliary cable in to your laptop and get a 3/4" adapter for the cable and plug it into your receiver. At least that's what I need to.

Start - > Drag what you need from here onto your desktop to create shortcuts. Then from My coputer -> C: "or your main hard drive" my programs, open the program folder that you want on desktop and drag the executable files ".exe" to desktop to create shortcuts.

Once you get what you want on desktop right click on your desktop -> Arrange Icons by-> Name or w.e to make it nice and neat ^-^ Hope this helps

You play Mahjong Titans like Mahjong Poculis, by selecting matching tiles to make them disappear. When there are no more tiles, the game is won.

The only constraint is that a tile has to be on borders and without any tile above to be a candidate for selection. The left or right part of a tile has be to be entirely available to make it selectable.

There are also two exceptions: flowers and seasons doesn't have to match to be associated. Any flower can be associated with another flower and any season can be associated with another season.

To gain a lot of points, you start off by selecting two 1 of a given family, then two 2, then two 3 and so on. You can also select continuously the four 1s or the four 2s... of a given family.

Enjoy!

Right now, we don't certify memorabilia but there are some companies around the world that do offer that service. We recommend researching that part of the industry and picking a service that is trusted and respected.

There are several software that create or use alb extension so depends on which one you have: 1) image commander album = used by paint shop pro 2) cubase = a music production program, a backup song file 3) alpha five data dictionary = contains data for the database 4) chief archetect library file = residential achitectural software, contains a library of drawing elements 5) alphacam laser VB file = CAD/CAM software 6) photo soap Since alb is abbreviation for album i would suspect there are more software that use this extension. If you dont have the specific software that created it then you may not be able to open it. One suggestion is to try to open it in word pad or similar text editor and see if it will tell you what program created it. It may also have all the info you seek as text.

Yes. Dragon Naturally Speaking dictation software is supposed to be able to get text from a recording, though in my opinion, it make far too many mistakes. If it is a matter of dictation recordings, it may be worth it to higher someone that is learning to be a court reporter to transfer the recordings to text.

1. the computer is switched on.

2.computer loads data from ROM and checks whether all the major components like processor,hard disc are functioning properly.

3.computer loads bios(basic input/output system) from ROM to determine the machine's fundamental configuration and environment.

4.computer loads the operating system from the secondary storage(hard disc) into ram .this allows the CPU to have immediate access to the operating system

,which enhances the performance and functionality of the overall system.

One of the uses of a computer regards automation of processes. Other computer uses include communication, entertainment, and educational purposes.

Generally, microcomputer packages refer to software suites that perform various tasks on a microcomputer. The "operation 2" could indicate a second level or advanced set of functions within such a package. These functions are critical for enhancing productivity, automating tasks, and enabling more complex computational work.

Japan had very few natural resources and a growing population.

Countries grow powerful in relation to the amount of resources they use in their industries, so to grow, they had to obtain their resources from other countries by the cheapest possible means, ie. by force.

Believe it or not, the ploy is called a Chapter 20!

A so-called "Chapter 20" bankruptcy is the process filing of a "Chapter 7" bankruptcy to discharge unsecured debts, followed by a "Chapter 13" bankruptcy to allow the debtor to catch up on mortgage payments.

The 2005 Bankruptcy Reform Act attempts to limit "Chapter 20" bankruptcies by imposing limits on the filing of successive bankruptcies. Under current bankrupcy law a Chapter 13 bankruptcy may be filed only once every two years, and three years must pass after the filing of a Chapter 7 bankruptcy before a Chapter 13 filing.

Some debtors attempt to circumvent this restriction by filing for Chapter 13 protection while the Chapter 7 petition is still pending. That option is not available in all courts. In a "Chapter 20" bankruptcy, debtors should be aware that missing even one mortgage payment after filing the initial "Chapter 7" petition may cost them their ability to save their home in a subsequent "Chapter 13" filing.

A username is an account set up by a computer administrator. An administrator has full access of the data stored and can do such things as add or remove software. A username is good because it allows multiple people to use the same computer but at the same time restricting access if desired. Passwords are group of characters that are encrypted to prevent or slow down access to unwanted users. Most PC user do not have the software like ophcrack to hack and obtain passwords.

You must have the Java Run-time Environment installed on your computer.

Steps:

1. Open Command Prompt

2. Enter the command: javac class.java

3. Enter the command: java <classfilename> (without the .java or .class extension)

The javac command will compile your java source file and create a class file. The java command will execute or run your java class file.

How to download and install Turbo C++ in Windows 7....

1.Download dosbox 0.74 from dosbox.com and save in E: drive(say).

2.Download Turbo C++ 3.0.

3.Create a folder Turbo in E: drive & save all contents of Turbo C++ 3.0.

4.Open dosbox.

5.Type as follows:-

mount e e:\ <Press enter>

e: <Press enter>

cd turbo <Press enter>

install install <Press enter>

6.Proceed as per requirements.

7.A folder TC appears in E: drive.

8.To repeat the point 5. commands whenever you open the dosbox, go to E:\Dosbox-0.74\Dosbox-0.74 Options

9.Scroll down to the end of the page and write as follows:-

mount E E:\

E:

CD TC

CD BIN

TC.EXE

10.Now open dosbox by clicking its icon on desktop and find to open Turbo C++ directly, but in a small dialob box.

A constant may refer to a literal constant, a constant variable.

A literal constant is a value that we use to initialise or assign to a variable, literally, such as:

int x {42}; // initialise

x = 0; // assign

Here, the values 42 and 0 are literal constants.

A constant variable is a variable which will not change value after initialisation:

const int x {42}; // initialise

x = 69; // error - cannot assign to a constant variable

Constant variables are useful when we wish to use the same constant value repeatedly within a scope. We could also use a literal constant rather than a constant variable, however naming our constants makes it easier to refer to the value consistently, particularly during code maintenance where we may wish to review the value. With a constant variable we need only change the initialiser, but with literal constants we must change every occurrence of the literal and that can lead to inconsistencies. Consider the following:

int x[100];

int y[100];

for (int i=0; i<100; ++i) { cout << x[i] << endl; }

// ...

for (int i=0; i<100; ++i) { cout << y[i] << endl; }

Here we've used the literal constant 100 four times. At a future time we may decide array x really needs 200 elements rather than 100, but we have to be careful which literals we change because array y makes use of that same literal constant. Using constant variables helps keep those usages separate:

const int xmax {100};

const int ymax {100};

int x[xmax]; int y[ymax]; for (int i=0; i<xmax; ++i) { cout << x[i] << endl; } // ...

for (int i=0; i<ymax; ++i) { cout << y[i] << endl; }

Now we can safely change the xmax initialiser without affecting any usage of the ymax constant:

const int xmax {200};

const int ymax {100};

int x[xmax];

int y[ymax];

for (int i=0; i<xmax; ++i) { cout << x[i] << endl; }

// ...

for (int i=0; i<ymax; ++i) { cout << y[i] << endl; }

Note that a constant variable cannot be initialised by a non-constant variable:

int x {42};

const int y {x}; // error - x is non-constant

Case is an application used to help methodize and control the manufacturing of the software, it is mostly used to manage large/challenging projects to ensure the finished project is of high quality. Though you can use it in multiple other ways.

professional image editing ;)

Well C language is a programming language it is used for designing programs. So you must be confused i can tell you how to shut your computer down using the command prompt though

*Step one open start and click run type cmd and press enter

*step two once the command prompt has opened type shutdown -i and press enter a dialogue box will appear

*Step three at the top of the box there is a button that says ADD click that and type your computers name if if you do not know your computers name opn the control panel then open system and choose the tab on the top that says computer name your computers full name will be located here

*Step four copy and paste your computers name into the box that popped up when you clicked add click ok now your computers name has been added to the list now from the drop down menu select what you want your computer to do restart shut down etc.

type a comment and select ok your computer should shutdown