How do you configure a network printer to a home network?
It depends on the printer you have.
But basic instructions are to log into the default IP Address of your home network's router /modem. put the IP address into your printer and have the network access key.
Printer on my WiFi home network?
Connect to one of computers connected to the network after that using sharing options share the printer.
Where can one purchase a wireless print server?
A wireless print server can be purchased in most bricks-and-mortar High Street electrical store such as PC World. Online, a wireless print server can be bought from Amazon.
What is optic fiber laying ship?
Fiber optic cables are laid across the ocean by massive ships specially designed for the task. The are operate by crews 24/7.
Can the main computer in a wireless network see pages browsed by a computer connected by wifi?
If you possess specialized software, you can do what ever you want if you have access to the network's router.
What acts as security buffer between companys privae network and all external network?
It's DMZ demilitarized zone.
Why is network security becoming an issue?
Usually because it requires more time to process traffic. It's well known that wireless networks with enabled security are slower than unsecured. If you have in the same time a lot of users it might become a serious issues and purchase of additional equipment is required.
Almost the same is true for wired network.
What is a Verizon wireless coupe?
A Verizon wireless coupe is a phone produced by Audiovox. It is very simple and loud and has large numbers. It was marketed towards the older generation. It has no camera and is very plain.
Is an upload speed of 0.35 mega bytes per second suitable for a webcam connection?
Yes, it should be sufficient.
Do you need both a wireless adapter and a wireless G router?
You can use router of G or N type and the same type wireless adapter. Of course you can use wireless N adapter with G-type router and reverse.
How do you stop a computer to broadcast?
Three basic ways:
NICs do not connect to applications, rather they connect to other wireless devices. IEEE 802.1 is the standard used to connect wireless NICs to other network devices.
WEP and WPA protect your information from unauthorized access when you are using your wireless connection. Longer key harder to crack.
WEP system is practically dead because of flaws in the encryption mechanism, and basically can be cracked within minutes.
WPA is a good choice especially with long keys. If you can, use WPA2-PSK AES. This one is almost impossible to crack.
I have Bachelor's of Science with 180 credits how many credits do I need for a Masters degree?
The level of courses taken depends on whether or not the school will accept them as transfer credits into a Masters program. Most schools require the completion of a Bachelor's degree in the area of Masters study unless you can show work or other experience in the major you are obtaining. Most Masters degree courses are geared directly towards the requested concentration and require 32SH.
How do i connect my computer to or wireless internet if it doesn't have wireless ability?
You'll need to purchase and install a "wireless adapter" for your computer -- and today the most popular ones are little "dongles" that plug into your USB port. You'd spend anywhere from about $30 to $80 for an adapter.
One that is installed, you will need to connect to a wireless network -- which is either going to be in a Hotel, coffee shop, or at your home if you've installed a Wireless Router or an Access Point. The adapter in your PC will "associate" to an "Access Point" -- and the Access Point will put your signal onto the network so you can access resources and/or the Internet.
What two Wi-Fi standards are used to provide a wireless connection between printers and computers?
802.11b and 802.11g
What if you lost your LAN settings?
Settings on a LAN are not stored in any one place; for disaster recovery planning any configuration information should be written down. Most settings for devices on a LAN come from the DHCP server, so backing up that server would preserve most of the typical LAN settings.
What is home network and how to connect with it?
The simplest kind of home network contains exactly two computers. You can use this kind of network to share files, a printer or another peripheral device, and even an Internet connection. To connect two computers for sharing these and other network resources, consider the options described below
The traditional method to network two computers involves making a dedicated link by plugging one cable into the two systems. Several alternatives exist for networking two computers in this manner:
How you can access to specific computer that locate withing wireless network?
You can use its IP address or network name (your firewall has to be configured properly).