Cable Internet

The set of standards for digital transmission of data over standard copper telephone lines is ISDN

Your internet browser could not load some or all of the information that you were looking for.

Sometimes that means that the page contains something in its programming that the browser does not understand. Sometimes its because the browser is to old to understand it.

The most consumer requested tape on the market is White Gorilla Tape. It has triple layer strength for projects inside/outside the home, and can be used in various ways. UV resistant, waterproof, and with the ability to stick to the roughest, bumpiest, unfriendliest surfaces, the average market price begins at $3.00.

You can't add wireless router to your computer. You can a wireless router to your network. If you do so, it does make your network wireless. In order to use your network wirelessly you need to have wireless adapter for all your computers you want to be connected wireless.

If it is a different outlet but the same subscribed phone line you should have no problems. If you plan on taking your modem to another location (different phone number) this will not work.

Yes, and you can connect many more devices.

The router should have at least 4 ethernet ports to connect to. And/or you can connect wireless also. If you have more then 4 wired devices then you can use a 4, 8, or 16 port ethernet Switch to connect to the Router.

Myself I have 3 desktops (wired), 3 wireless and 1 wired laptops, an X-Box 360 (wired), a Wii (wireless), a BlueRay player (wireless) and a Brother laser printer (wireless) connected to the router. (1 desktop, 1 laptop and the X-Box are hooked to the Router and the rest of the wired devices are connected to an 8 port ethernet Switch which is connected to the Router.)

The T-1 channel combines 24x 64 Kbps channels into one single channel using Channel Bonding or Channel Aggregation.

The router will prompt the user for a response to enter setup mode.

You do not need to run any wires. DSL connects directly to the phone jack. You run phone line from the phone jack to a filter, then to the DSL Modem. You can also install a filter at the interface to eliminate the need for filters inside the home. If you install interior filters, you will need one at each phone jack that is being used by any device. From the modem you can either run USB or Ethernet cable to the computer if the modem is a USB/Ethernet modem. I do not recommend USB. Use the Ethernet if at all possible. The connection is more stable and slightly faster. If your computer has no Ethernet connection, you can install an Ethernet card for as little as $20. Use a good quality Cat5 or Cat6 cable from the Modem to the computer.

Solar Compact Disc Pvt Ltd (Solar CD), a subsidiary of plastics major Saro group, has set up a new plant for manufacturing prerecorded CDs, DVDs which would cater to the growing demand among the music, film, software and hardware industries. There is a good demand for replication services from CD and DVD companies having copyrights for their products and being the first unit in Tamilnadu to manufacture prerecorded formats in CDs and DVDs we will cater to this market,' said G Dayal Nathan, director, Solar CD. Talking to mediapersons on the eve of the inauguration, he said the company used the state-of-the-art technology in a secure ambience to turn out prerecorded CDs, DVDs and glass masters with a capacity of seven million discs a year. The optical disc market in South India has crossed more than 10 million discs per month and was poised for rapid growth as the retail prices of CDs and DVDs would fall below Rs 30 per disc. The new plant of Solar CD at the Guindy Estate would work in three shifts to produce 60,000 CDs and 40,000 DVDs per day. SolarCD, the India's leading CD / DVD Duplicator, Replicator & Printer located in Chennai. When you need CD or DVD Replication, Short-run Duplication, complete Printing and Packaging options, DVD Authoring, CD Mastering, DVD / CD Duplicators and Printers, affordable Blank CDs and Blank DVDs, CD Cases, or DVD Cases, for more info...www.solarcd.com

one disadvantage of using satellite for an internet connection is that it experiences delays in transmission (call latency), especially when uploading, more so than DSL or cable modem

1) You purchase the cable

2) You plug it into the network adapter (network card).

If the cable directly connects two computers, you need a crossover cable; if the computers are connected via a switch (this lets you connect more than two computers), you need a straight cable. Make sure to measure how much cable you need, and to purchase some extra length, to let you move the computers around freely.

first you need the following:

- receiver

- computer with a serial port

- null modem/serial cable

- software

- latest .bin file you want to upload to the receiver

the bin file contains the info you need to put on the receiver when the dish goes down. you download the file to the receiver using the software.

the software can be found here: http://www.aaafta.com/forum/captiveworks-cw-600s-premium-files/2267-new-captiveworks-captiveworks-600s-premium-loader-v1-07-a.HTML

the binary files (also called BV fixes) can be found here: http://www.livefta.com/forums/captiveworks-files/

1) plug in receiver, hook up cable from receiver to computer by serial ports.

2) start software. click the little folder icon at the top and locate where ever you have unzipped your .bin file to. do not touch your com port setting in the program unless your com port has been changed manually (default, it should be COM 1).

3) turn power off on the receiver via the switch on the back. select "upload data", then start, then turn on power to receiver. receiver should get stuck in "boot".

4) select "download data". hit start. receiver should start to show odd values on the screen that change very fast (i think its HEX code) and the progress bar in the software should start to move.

5) when receiver says "- END" it is done. cycle power off and enjoy.

if you want to use a USB to serial cable, here is a how-to

the router as ports commonly used for lan cannection is (Ethernet)

You need an ethernet cable to plug into the internet port. Then you need to register/buy internet services in order for it to work. Once you do all of that then you can use the internet as much as you want.

First, you have to know what the default gateway address for your LAN segment is. This might mean talking to your network administrator.

Usually this address is set automatically by the DHCP protocol, so you don't need to do anything. If you are using a set of static addresses, then you can specify the default gateway address in one of the Windows network dialog boxes. For Unix/Linux, the 'ifconfig' command allows you to set the default gateway address.

For server 2008 (including Server 2008 Core) use the netsh command to set the default gateway address (if not using DHCP).

command prompt

It's up to you. The only case when you would have to delete settings for the previous one is if you are going to call your new router the same name. It might cause some compatibility problems, that's why in such cases it's recommended to delete previous profiles.

If you're having a problem when you Alt-click on a word and nothing happens, you may be experiencing a conflict over use of Alt-click. You can try some of the other possibilities, like Ctrl-click, Shift+Ctrl-click, etc, offered on the Activation tab in the 1-Click Answers options. If you still aren't getting an AnswerTip, contact Answers.com Support from the Contact Us page on their website.

a modem is a tool which can change analog sinal to digital signal and vice-versa. when the communication has to take place between the two computers then there is involvement of wires or some wireless technology. if communication exists between then it is through analog signals and computer can accept only digital signal. so,basically modem changes the analog signal to digital when the data is to be received at computer's end and hence it works and facilitates the commmunication between two or more computers.

In electrical engineering, impedance measures how easily a circuit conducts current when a voltage runs through it. Measured in ohms, impedance is a way of telling you how much of the voltage introduced at one end will really make it to the other end.

Yes. I am doing exactly that, right now. That's nice, so how do you do it?

Cat6 is the current standard for new installations of ethernet cable. Depending on the space and certain building codes you need to decide between Plenum (CMP) or Riser (CMR). The difference being Riser cable is more durable, but puts out toxic fumes when caught on fire, so it is not suitable for spaces with open air flow. Dropped ceilings are generally considered Plenum spaces so therefore require plenum cable.

Total 64 combinations will occure in input.