0
Cable Television
A cable television is a system that distributes television signals by means of fiber-optic or coaxial cables. Cable television systems started in the United States in the late 1940s to enhance reception in hilly and remote areas, where broadcast signals were weak.
3,389 Questions
The DTV act making TV stations digital and no more analog channels. Layman's terms: Off air channels, picked up with antenna.
"For full-power TV stations, the transition went into effect on Friday June 12, 2009, with stations ending regular programming on their analog signals no later than 11:59 pm local time that day."
What country are dynex TVs made?
Hisense makes Insignia ,Dynex and Best Buy Budjet 1080p Sharp product ( now) XOCECO used to make them .
There are many resources that offer detailed and very technical descriptions of television technology. It is a complex system and there is space here for no more than a very brief summary.
Television cameras convert light into electrical signals. The signal they generate is a stream of data that represents the amount of red, green and blue in the image. The light coming into the camera is sampled at the top left of the image first and then all the way across the image to the right. The next samples will do the same but slightly lower. The process is repeated until the bottom of the image is reached and then the light sampling begins all over again. The number of lines that are sampled can be 480 or 576 for standard definition signals and 1080 for high definition. In either case, the signal that is output from the camera describes the image it sees 50 or 60 times each second.
Studios capture these signals and after they have been mixed with other camera outputs and titles, the signal is broadcast. It is carried over cable or radio links and received at the television.
The television uses the same signal to draw an image. Starting from the top left, the brightness levels in the electrical signal are used to produce red, green and blue dots across the screen. The next line is then drawn and so on down the screen until the image is complete. As soon as the image is drawn on the whole screen, the process starts over and it is this repeating process that creates the moving image.
There are many details of television signal capture, process and display that are left out of this description. For those who want to know more, topics that can be researched should include PAL and NTSC color encoding, interlaced television signals, SD and HD signal resolution, CRT television operation, LCD television operation and plasma television operation. There are numerous answers on this site that deal with some of these topics and of course there is lots more elsewhere on the Internet.
You will need:
1. The Video Cassette you want to copy 2. A VCR to play the cassette 3. A Blank CD-R to record the captured video 3. A computer with a video capture card (like AVerDVD EZMaker Video Capture Card or Pyro 1394DV Digital Video Capture Card, etc) installed. You will also need a CD-R/W drive in your computer to burn the resulting movie file to a CD. 4. If you are purchasing a video capture card, they usually come with the necessary software. 5. Cables to connect your VCR to the PC. If you are purchasing a card like in 3 above, you should receive the cables with your card.
6. Software for converting VCR video to avi or mpeg.
To convert the video-cassette:
1. Instal the video capture card in your PC - usually in a PCI slot. 2. Connect the VCR output to the card input on your PC. 3. Power on your PC and the VCR 4. Start the video capture software on your computer, Pop in the video-cassette into the VCR and follow the instructions as per the software's manual. 5. This should convert the video-cassette into a digital movie file on your computer's hard disk.
6. Convert video to avi or mpeg
7. Next, use the CD burning software which came with your computer to burn this movie onto the CD-R.
How do you introduce a product in tv program?
How do you introduce a product in a* tv program?
Usually a presentation has an attention getter, a demonstration of value, and a call to action.
Attention getter: Something that pops, it attracts the consumer's attention and should demonstrate a value of the product.
Demonstration of value: Why the product is important, what need it fulfills, and why the viewer should care.
Call to action: Something to make the viewer actually buy the product. Example: "Call now and we will throw in a second XYZ for no additional charge. Inventory is limited so call now!"
When does Make It or Break It come back on?
It is back on now, but it started season 2 in July 2010
In 2011, it is supposed to be on in March, but the exact date is unknown.
You could try entering the make and model number of the motor into an Internet search engine to see if you can find a wiring diagram for it.
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Is it legal to watch your staff constantly on CCTV?
As far as I know, yes. But you should let the employees know that a CCTV system is in place and operational.
What is the period of a wave traviling 5 ms it its wavelength is 20 m?
If a wave is traveling at 5 meters per second (assuming that is what the question meant) and its wavelength is 20 meters, consider standing beside the wave and watching it pass. As the wave is 20 meters long and it is moving at 5 meters per second, it will take 4 seconds for the full cycle of the wave to pass an observer. That means its frequency is one cycle per 4 seconds. And - surprise! - that's the period of the wave. The period of the wave is 4 seconds.
The cost for dialing star 69 with cox is 1.99 each one The cost for dialing star 69 with cox is 1.99 each one
Connect the AUDIO INPUT of the Sound system to the AUDIO OUTPUT of the TV set. Connect the Cable Box to the #1 VIDEO input on the TV. Connect the BLUE RAY to the #2 VIDEO input of the TV set. The TV might have a AUDIO OUTPUT function in the AUDIO MENU. switch this to FIXED. This will send a even audio signal to your sound system at all times. Turn the TV sound down and use the sound system speakers.
The ABC affiliates in Texas are:
Abilene - KTXS-TV - Channel 12
Amarillo - KVII-TV - Channel 7
Austin - KVUE - Chann- Channel 24
Beaumont - KBMT-TV - Channel 12
Bryan - KRHD-LP - Channel 40
Corpus Christi - KIII-TV - Channel 3
Dallas - WFAA-TV - Channel 8
El Paso - KVIA-TV - Channel 7
Houston - KTRK-TV - Channel 13
Lubbock - KAMC - Channel 28
Lufkin - KTRE-TV - Channel 9
Midland - KMID-TV - Channel 2
San Antonio - KSAT-TV - Channel 12
Tyler - KLTV - Channel 7
Victoria - KAVU-TV - Channel 25
Waco - KXXV-TV - Channel 25
Weslaco - KRGV-TV - Channel 5
Pick the city closest to you.
What is the show New Intelligence with Jan Cox about?
There are different answer to this question:
The show is about consciousness and is for people who are not satisfied with the mechanical, habitual thoughts they are made to think. You are not your thoughts. This is not easily described, hence the use of metaphor. Jan may seem to be talking about politics, the church or auto repair, but it is all metaphor, with the intended aim of producing a vantage point within you that can see what is really going on, rather than what you have learned is going on. Look on google video for jan's Intro, a 13hour crash course designed to separate those who need this type of activity from those who simply Think they do.
Or:
One of the actions that Jan was able to translate to a few of us over the years was to SEE a real difference between the mind's ordinary, habitual, incessant, comment upon itself as opposed to the effort of "consideration" or the "experience" of something with absolutely NO horizontal thought or comment therein. -- Rick Moser
7 What term is used to describe the transformation of analog signals into digital signals?
Transforming analog signals to digital is known simply as analog to digital conversion, sometimes shortened to A-D conversion.
