0
Civil Engineering
Civil Engineering is a profession of designing and executing structural works that serve the general public, like houses, buildings, roads, etc. A Civil Engineer is an engineer trained in the design and construction of public works, such as bridges or dams, and other large facilities.
4,921 Questions
What is mean by one short edge discontinuous in two way slab?
It's a case two.. in which a slab has three continuous sides (i.e. three sides are followed by other slabs ).
How much compressive strength fo m20 kerb stone?
The compressive strength of M20 concrete, which is commonly used for kerb stones, is typically designed to achieve a characteristic strength of 20 MPa (megapascals) at 28 days of curing. This strength is suitable for various applications, including road and pavement infrastructure. However, actual compressive strength can vary based on factors like mix design, materials used, and curing conditions. Always refer to specific project requirements and standards for precise specifications.
What is a triangular pyramid used for?
Small Triangular shaped pyramids are used in super markets and malls to give them strong support!
Paid laborers, slaves, and the legions all had part in building the aqueducts.
The Romans built the aqueducts over the course of many centuries and therefore they were commissioned by various men. During the period of the Roman Republic (509 BC-27 BC) the censors were in charge of public works and therefore commissioned the aqueducts. The first aqueduct was commissioned in 312 BC by Appius Claudius Caecus and was named Aqua Claudia, after him. The Anius Vetus was built in 272-269 BC and was commissioned by Manius Curius Dentatus. The Aqua Marcia was built in 1440-140 BC and was commissioned by Quintus Marcius Rex., who also repaired the Anius Vetus. The Auqa Tepula was built in 126 BC and was commissioned C by G. Servilius Caepio and L. Cassius Longinus. Agrippa, who was in charge of public works under Augustus, commissioned the Aqua Julia (33 BC) and the Aqua Virgo (19 BC). He also repaired the Anius Vetus Aqua Marcia.
What is a under-reinforced section in design of beam?
An under-reinforced section in beam design refers to a concrete beam that has insufficient tensile reinforcement to prevent failure by yielding of the steel before crushing of the concrete. This condition is typically characterized by a lower ratio of steel reinforcement to the amount of concrete, resulting in a ductile failure mode. In such a scenario, the steel reinforcement reaches its yield strength before the concrete reaches its ultimate compressive strength, allowing for some warning before failure occurs. This design approach is often preferred as it provides a more predictable and safer collapse mechanism.
What is the derivation of rip-rap?
rip rap is large rocks, in various sizes, used to control eroision,
What is the meaning soffit beam?
A soffit beam is a structural element that is typically located above doorways or windows, providing support to the structure above while also concealing ductwork, plumbing, or electrical wiring. It is often found in ceilings or under eaves, contributing to the aesthetic and functional aspects of a building's design. The term "soffit" refers to the underside of an architectural feature, and when combined with "beam," it indicates a beam that is incorporated within or adjacent to this space.
What is the force exerted by the Tacoma narrows bridge?
the force was torsion. the wind made it bend like silly puddy ************** The force exerted TO the Tacoma narrows bridge was initially the wind resistance. The wind resistance caused the whole bridge to act as a system with forced vibration with damping.
What are the advantages and disadvantages of having salt on the road?
The disadvantages of having salt on the road are, the it wrecks the tires, the road's, the drains if there are fish in them.
The advantages of having salt on the road it makes the road less slippery so there are less car crashes, and it is cheap.
What is the strength of st4 concrete?
The strength of ST4 concrete typically has a characteristic compressive strength of about 20 MPa (megapascals) when tested at 28 days. It is considered a medium-strength concrete, suitable for various structural applications such as residential foundations, driveways, and non-load-bearing walls. This grade of concrete provides good durability and workability, making it a popular choice in construction.
What is the most strongest bridge type?
The strongest bridge type is typically the arch bridge. Its design allows it to efficiently distribute weight and withstand heavy loads by converting vertical forces into horizontal ones, which are then transferred to the supports at either end. Arch bridges can span large distances and are often made from durable materials like stone or steel, contributing to their strength and longevity. Their aesthetic appeal and structural integrity make them a popular choice for both functional and iconic bridges.
What is the effect of bending moment for ship?
The effects of bending moments for ships causes support beams to bend as well due to the stresses of the weight it bares. Over time the weight on the support beams will gradually begin to bend.
