0
Computer Hardware
Computer hardware is a general term used to refer to all the physical parts of a computer. Internal hardware devices include hard drives and motherboards, while external hardware devices include monitors, mice, keyboards, and printers.
11,849 Questions
A server hosts resources that others can request or use. Therefore, anyone that is requesting information or a service that is on a server is using it. Traditionally these are called clients.
How does a usb midi cable work?
Midi to USB cables run from some sort of musical device (electronic keyboard, electric guitar, etc) to a USB port on your computer. You can use it to transfer midi files (music files) into your computer.
Yes, a BIOS (Basic Input/Output System) is typically stored on a non-volatile memory chip, such as EEPROM (Electrically Erasable Programmable Read-Only Memory) or flash memory. This allows the BIOS to retain its data even when the computer is powered off. The EEPROM enables firmware updates to be performed, allowing for improvements and bug fixes to the BIOS.
What type of expansion slot would you install a x16 card?
An x16 card is typically installed in a PCI Express (PCIe) x16 expansion slot. This type of slot provides the necessary bandwidth and connectivity for high-performance components like graphics cards. Most modern motherboards come equipped with one or more PCIe x16 slots to accommodate these devices. Always ensure compatibility with your motherboard before installation.
An input-output rule is a mathematical or logical guideline that defines how inputs to a system are transformed into outputs. This concept is commonly used in various fields, such as computer science, economics, and engineering, to model relationships and processes. For example, in programming, a function may take specific input values and produce corresponding output values based on defined operations. Understanding these rules helps in predicting outcomes and optimizing processes.
The capacitors in the power supply may still be 'charged' - and give off a powerful shock if touched.
What type of USB connector is reversible?
USB Type-C uses the USB 3.0 technology, and is reversible. However, the old Micro-USB standard does have cable variations that allow it to be reversible.
Why is my mouse not functioning properly?
Based on your comment in the discussion (moving the mouse makes the cursor fly around the screen randomly and exhibit other odd behavior), it could be a driver issue but that is usually not the case since mice tend to work just fine with the driver installed by default within Windows. Now if you tried installing the specific software that came with the mouse, that could be the culprit. In that case, try removing that driver and just use the standard one from Windows.
You might also try using this mouse on another computer and see if it exhibits the same problems. If so, then you could have a bad mouse.
Something else to consider is whether this is a wireless mouse and, if so, where is the USB dongle located in regard to any power cords or other cables, speakers, or other such items. Anything that can put out a large magnetic or electromagnetic field can affect the operation of the mouse. Other things that can interfere with reception of the signal includes other computer equipment (network switch, flight simulator displays (such as I have in my computing environment), etc.), piles of dense material such as stacks of CDs/DVDs that are several inches tall, metal drink cups, and so forth.
Finally, once again if this is a cordless mouse, you might see if the battery is getting weak. When the battery is dying, the mouse doesn't properly track its movement and can misinterpret one "snapshot" of its movement from the previous and therefore make it think that it should move significant farther across the screen than it should have.
I hope all this helps. If you have any further questions or would like additional assistance in troubleshooting, let me know. If you happen to be in the northeast Kansas area and would like professional assistance from my company, drop me a line and I will be glad to set something up with you.
Update: Since I posted this answer a couple of months ago, I have had some other thoughts that might be relevant. First, if the mouse is a corded mouse, you might want to make sure that the connector is undamaged. In the days of old PS/2 mice (the ones that had the small round connectors), one or more of the really tiny and thin pins could get bent by improper alignment while being inserted into the jack and that most often caused the mouse not to work at all but would in some cases cause erratic behavior such as you have described. Nowadays with mice being only USB-attached devices, that is less common but it still may occur. Check to make sure the plastic blade inside the USB port and that inside the mouse connector are not loose, cracked, or otherwise damaged. If there is any such damage to the computer's port, use a different port (if one is available) or get a USB hub and start connecting your devices into it while plugging the hub into one of the undamaged ports on the computer. If it is the mouse that is damaged, replace the mouse.
Second, if the computer in question has a touchscreen, there are a couple of issues that could arise. At the top of the list is a conflict between the mouse driver and the touchscreen driver. Try disabling the touchscreen functionality and see if that resolves the problem. Next, make sure that the touchscreen is squeaky clean. I recently had an erratic mouse issue and it turned out that the problem was a very dirty screen in that it was covered with all sorts of brown gunk due to the client being a heavy smoker. (I used three paper towels and plenty of Windex to get all that goo cleaned off!) Once the screen was clean, both the touchscreen capability and the mouse worked normally.
Third, check the surface on which you are using the mouse. If you have not had this issue until recently and you have changed where you use your mouse, it could very well be the surface. For example, if you use an optical/laser mouse and you are working on a mirrored surface without a mousepad, then that could cause bizarre behavior because of the various paths that the light signal is taking to return to the mouse's sensor. If you are instead working on a very uniform surface, such as an untextured plastic surface of a uniform color, the mouse will have a hard time detecting which direction the mouse is moving due to its inability to see any variation in the surface pattern. This could cause the mouse not to move at first but then, when it does, it may jump wildly due to its perception of the change in its position. Use something that has a cloth surface or something else that gives a more noticeable (and trackable) variation while the mouse moves to see whether this could be an issue.
As always, let me know if I can be of any further assistance. I am always glad to help.
Does a laptop weigh 500 g or 5 kg?
A modern laptop with an optical drive, 15-inch or 17-inch LCD panel, and either a hard drive or solid state drive will typically weight somewhere around 4 to 6 pounds, which would be closer to 2 to 3 kilograms. By comparison, 500 grams is about one pound, about the same as a standard box of four sticks of butter.
Can you burn CD's without WiFi?
Yes, this is an internal function of the computer. You need a writable cd and the file on your computer.
What are the benefits of having 24 GB OF RAM?
Having 24 GB of RAM offers several benefits, particularly for multitasking and performance-intensive applications. It allows for smoother operation when running multiple programs simultaneously, facilitating efficient workflows for tasks like video editing, gaming, and graphic design. Additionally, more RAM can improve system responsiveness and reduce load times, enabling better handling of large files or data sets. Overall, it enhances overall computing performance, making it ideal for power users and professionals.
IF - and it's a big 'if' - you can set up your phone to send files without actually reading the screen, Windows software and a computer's wi-fi connection can detect devices in close proximity. That should enable you to download the data from your phone to the computer.
What is a magnetic stripe reader and where is it used?
A magnetic stripe reader is a device that reads the information encoded in the magnetic stripe on the back of cards, such as credit cards, debit cards, and ID cards. It works by passing the card through the reader, which detects the changes in the magnetic field and interprets the data stored on the stripe. Magnetic stripe readers are commonly used in point-of-sale systems, access control systems, and various identification applications. They facilitate secure transactions and streamline access management in numerous industries.
What is true before a motherboard can take advantage of the triple memory channels on the boarde?
Before a motherboard can take advantage of triple memory channels, it must have compatible memory modules installed, typically in sets of three. The motherboard must also support triple-channel memory architecture, which is usually found in certain chipsets designed for high-performance computing. Additionally, the CPU must support triple-channel memory to fully utilize the bandwidth provided by this configuration. Proper installation in the correct memory slots is also crucial to ensure optimal performance.
Does the Verizon fios -g1100 have an ethernet port?
Yes:
- WAN-Gigabit Ethernet and MoCA 2.0 Interface
- LAN-802.11 b/g/n/ac, Gigabit Ethernet and MoCA 2.0 Interface
- Integrated Wired Networking with 4-port Ethernet Switch and Coax (MoCA 2.0)
What work do you think is possible using computer?
Most laborious tasks that humans do can be done via computer. After all a computer is a machine that is programmed by humans.
What is primary disc partition?
The primary disk partition is the main partition that your operating system is on your hard drive. If you only had 1 OS on your computer such as Windows, then you would have two partitions, 1 would be a backup/recovery that includes that boot manager, and the second partition (the primary) would be the one that includes all of your files and the OS itself.
Why we say OS is a resource allocator and OS is a control program?
Because that's exactly what an operating system is designed to do. Its purpose is to allocate memory & resources to the tasks being demanded by the operator - and also control all the electronics of the computer - including peripherals.
