0
Computer Networking
Computer networks are collections of computers which are connected together in order to communicate and transfer information. Questions about computer networks, networking protocols, and how to set them up belong here.
18,810 Questions
SM Bus Controller is the generic reference for the system board main chipset of Microsoft Windows XP. This can be found on the uninstalled chipset driver.
Well instead of wasting money on zantrex just have 66 cups of coffee per day! Yeah, I'm serious man. One of those capsules contains 11 cups of coffee according to consumerlab.com Crazy or what! So 6 capsules is the equivalent to having 66 cups of coffee! Man, that is ridiculous! Hydroxycut, that has been recalled by the FDA. I read about it in the New York Times. Some massive recall due to liver damage. Forget about it. Check it out
What is netbios and if you disable it on your computer may you still access the internet?
As far as I know, NetBIOS was a own protocol once. Nowadays, Microsoft uses some components of it for networking via TCP/IP. When you access the properties of your network connection and choose "advanced", there is an option for deactivating NetBIOS. When you have Windows XP: Choose properties of you LAN connection properties of TCP/IP "advanced" (right part on the end of the properties window) click the third title "WINS" Here you might be able to deactivate NetBIOS, but I would not recommend it, because it is used for communicating with older systems and non-Windows enviroments.
It does not require any particular switch or router you can use either.
Do you need a network if you go wireless?
Yes. "Going wireless" simply means that you "use a wireless network".
Yes. "Going wireless" simply means that you "use a wireless network".
Yes. "Going wireless" simply means that you "use a wireless network".
Yes. "Going wireless" simply means that you "use a wireless network".
What is the difference between broadcast and point to point?
Broadcast means you sent digital signals to any device connected to a network. Point to point means you send digital signals from a specific point to a specific point (identified by IP address or MAC address).
What is the subnet mask of 135.210.195.112?
This is a Class B address. So if classful addressing scheme we can say that the default mask of any Class B address is 255.255.0.0. But it may not be always this. There is a concept called VLSM (variable length subnet mask) with which we have the option to give different subnet masks.
Select the one that best describes the contents of a typical network frame?
senders MAC address, recipients MAC address, data, CRC
RECIPIENTS MAC ADDRESS, SENDERS MAC ADDRESS, DATA,CRC
RECIPIENTS IP ADDRESS, SENDERS IP ADDRESS, DATA, CRC
RECIPIENTS EMAIL ADDRESS, SENDERS EMAIL ADDRESS,DATA,CRC
Where do you get your subnet number from?
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
What are possible drawbacks associated with the adoption of network computers?
What are possible drawbacks
IS mesh network topology the most expensive one?
Yes mesh is the most expensive because in a mesh environment, a cable runs from every computer to every other computer. If you have four computers , you must have six cables three coming from each computer to the other computers.
How do you connect to computers to your companys Lan using a wireless connection?
It is likely that your company wireless is secure. You will need to contact your administrator for assistance.
A NAK is a negative acknowledgment from DHCP. This can be done when an address renewal is refused by the DHCP server, or a duplicate IP address exists when requesting an offered IP address, among other reasons.
ya you can acheive bt the thing is that u have to enable ppp multilink on the bri interface and set the load-threshold value to 1 so that the full two channel bandwidth will be used by the single data call and u will get what u r expecting ......
What TCPIP model layer does DHCP work at?
DHCP is a layer-4 protocol, most commonly transported over UDP. UDP port number 67 is the destination port of a server, and UDP port number 68 is used by the client
How to Restart Xbox Console Network Hardware?
When users are unable to connect to Xbox Live, the first troubleshooting recommendation is to restart the network hardware. This can be accomplished by following a few simple steps and then retesting the network connection to ensure that it is online. Many times, a simple restart will solve connectivity issues and enable a gamer to return to online gaming instantly.
How to Restart Xbox Console Network Hardware
1. Determine the kind of network hardware your Xbox live uses to connect to establish an internet connection. Common types of hardware include:
-Modem. A modem connection is typically a DSL or Cable connection.
-Router.
-Bridge
-Gateway
-Computer
The most common form of connection is a modem or a router. These pieces of hardware can be combined to form a gateway connection between the network and the Xbox live. When many hubs are being used at once, it’s sometimes necessary to have a router to make all connections more convenient.
2. Turn off Xbox console and connection hardware.
3. Wait 60 seconds.
4. Turn power on the modem or other connection hardware and give it time to establish an internet connection.
5. If there is additional hardware connecting the Xbox console to a network, step four should be repeated for each piece of hardware.
6. Switch on the Xbox console and give it time to reach player dashboard.
7. When the Xbox menu is reached, go to the following menu items in the order they are listed:
-My Xbox
-System Settings
-Network settings
-Test Xbox live connection
If the connection still hasn’t been established, further troubleshooting is needed. The official website of Xbox live has a feature called Xbox lived connect solution that will help users determine how to best solve their Xbox live technical issues. It’s always possible to investigate the issue on one’s own. Other sources of help to contact might be a modem’s manufacturer, a router’s manufacturer, or a computer’s manufacturer. There are some connections that require ports to be configured properly to work with the Xbox live system, and these can only be set up through modem or router control panels.
When was Security Administrator Tool for Analyzing Networks created?
Security Administrator Tool for Analyzing Networks was created in 1995.
internet
What logs might reveal the IP address and MAC address within the local network?
Use ip\mac scanner: http://trogonsoftware/trogon-mac-scanner.html
