Fishing

you need a fishing license in every state at age 16 unless you are fishing in any body of water

Depends...

You can use dough and add some flour to make a dough ball or even a small piece of hot dog will do.

Hope I helped. =D

There are many things. Bass are fighters, spectacular athletes, and can be hard to fool on occasion. But, to answer your question. The most important thing is to practice "catch and release", so future generations can enjoy the sport.

A 7.5 hp outboard would work for a small, lightweight boat, something along the line of a 10 to 12 ft. aluminum boat.

Usually, fish turn on right before an approaching storm front.

Ice fishing in Ontario end when the ice can no longer support a fisherman. Ice Hut need to be removed at specific times depending on the body of water in question.

No there is no code for the fishing rod in animal crossing. You may have seen some of the other folks with a fishing rod. You may feel a bit jealous though.

If you shake trees, you get 100 bells (sometimes though) shake enough trees to get at least 500 bells. Just shake different trees. 5 different trees usually give you 500 bells.

Then go to tom nooks store. You should see a fishing rod on the little wooden table in the middle of the store/room.

Buy that fishing rod. Go outside to some ponds/lakes/rivers and try to catch fish. You usually know when there's a fish by seeing a small/big black thing in the blue water. Put your rod in. When the fish starts tapping on it, the red and yellow thing will go in the water. Hold a on your DS and the fish should start swirling around. Let go of a and you should have caught the fish!

Thanks and hope this helped!!!!!!

- eating M&M's

shipbuiding industrie and a growing industry

If you have uploaded the 3.0 software update, then you should have village shop on the flick fishing menu go there and it should have private beach info tap on the info and then tap on the icon that says 0.99 and buy it for ninety nine cents

A Swiss army knife is a handy pocket knife for doing fine work while camping or hiking. However, it's too small for chopping firewood. This is where a larger blade knife is needed. A survival knife with a blade length of about 5 to about 7 inches is generally sufficient for chopping and splitting (known as batoning) wood into smaller pieces to be used as firewood. Choose a blade length large enough for this important survival task but not too large to maintain good blade control.

A survival knife needs to be as indestructible as possible, able to take a razor edge, hold that edge, and be easy to sharpen as needed. A knife blade made of a tried and true carbon steel like 1095 meets this performance criteria. There is no need to get caught up in the newest high tech steel for wilderness survival tasks. Stainless steel blades are harder to sharpen and don't hold an edge for as long as carbon steel blades, but do have their place in frequent fresh and salt water environments for boaters, fishermen, and Navy Seals for example.

A useful survival knife needs to be big enough for big jobs like splitting wood, and used as a weapon if need be but not so big that it is cumbersome while doing finer tasks like food preparation, or shaving wood into small pieces to help build a campfire. Other uses for a survival knife can include hacking through ice that a shovel won't cut through, batoning wood for a campfire, cutting rope, making tent stakes, cutting the top off of food cans, hunting, and making traps. The list of survival needs is almost endless.

For wilderness survival tasks, avoid double edged blades and tanto style blades because these are designed more for thrusting as opposed to cutting, chopping and splitting wood. They are not as functional because they tend to have weak tips that can be broken off while doing survival tasks. Remember reliability is everything in a survival knife. A double edged blade also doesn't have a thick spine, so it would be impossible to baton wood with it. A survival knife with a drop point blade is the best all-around blade design for wilderness survival since it is less prone to bending and breaking during most survival tasks.

Large Rambo style knives may look cool and menacing, but are generally too large, heavy and therefore cumbersome for most survival tasks.

Because a survival knife needs to be as strong as possible, a fixed blade knife is preferred over a folding blade knife. Also, the blade length needs to extend from the tip to the end or slightly beyond the end of the knife handle. This one-piece design, called a "full-tang" knife design, is stronger than a two piece design where the blade is attached to the handle using screws, rivets and other attachment techniques.

There is a debate whether or not the blade edge should include serrations. Although this is an option in many survival knives made today, I feel a plain straight edge blade is more reliable since it's is easier to sharpen, does not require special tools to sharpen, and can do the tasks of a serrated edge knife. Simplicity and strength generally contribute to greater reliability for many survival knife tasks.

The spine of the blade runs opposite to the cutting edge of the blade and should be 1/8 to 1/4 inch thick so that it has enough strength for batoning (hitting it with a piece of wood) to split firewood. The spine of the blade should be flat so that it does not chew up the baton (the wood you are using to hit the spine.

Their are many variations of survival knife handles. The knife handle should be solid and should feel comfortable in your hand, provide good blade control, and be durable enough to survive the many tasks required of the survival knife. Hollow handled knives tend to break easily, making them unreliable for wilderness survival tasks. Survival knife handle materials include hard rubber, plastics like glass-reinforced nylon and Kraton(R), wood, and other materials.

When you obtain your survival knife, be careful with it and use it often. This will help you gain confidence using it and will help you find more handy uses for it. Keep it clean. Form the habit of cleaning it before putting it in its sheath. To help prevent blade rust, lubricate it with WD40 or your favorite petroleum based oil. This will help you maintain it for a lifetime.

Fish can be caught in a multitude of ways. Most people use a rod and reel to catch fish. This features a long pole with a string going down the length of it. The pole (or "rod") is used to fling the string far out into the water. At the end of the string (or "line") is a hook, which is used to catch the fish. A weight may also be attached in order to fling the hook out further and help it sink in the water. A float can be attached somewhere along the line in order to keep the hook from sinking to far. Fish are attracted to the hook by some sort of bait, this can be almost anything: live worms, puff balls, small fish, fish eggs, and pieces of metal are allfrequently used. After the fish is hooked, it is brought in by reeling the line in using a reel. This method is actually highly ineffective at catching fish, thus it is termed "sport fishing" to reflect its difficulty. Most fish are caught using a net or trap. Dip-netting is the act of using a giant net on a very long pole to catch fish while standing waist deep in water. Over 50 fish can be caught in one day using this method. Commercial fishermen pull a gigantic net behind a boat to catch even larger quantities of fish. This is where most fish you would buy at a store comes from. Fish can also be caught in large quantities by using a "fish wheel," a small wheel which turns in the water and traps fish.

A thrid-class lever

Gunpowder or black powder serves many important functions including giving bullets their exploding power. It was originally invented by the Chinese.

leaches

If you plan to eat it, and I hope you do, the first thing you have to do is clean it. It has been a long time since I cleaned a fish and there are different methods. In the method I am describing, the first thing you do is cut the head off with a filet or other sharp knife. Next, scrape off the scales by running your knife along each side until all the scales are off. Next, lay the fish on one side and very carefully cut the meat away from the bones. If I remember correctly, it is best to start at the tail end right above the tail. Do the same on the other side. Though you should have filets that are bone-free using this method, always be careful when you eat the fish because it is possible that you missed some of the bones.

Around 25 - 45 dollars.

cyanide fishing kills coral reef cause of many fish die.

Unfortunately, the answer I have for you is quite obtuse. Without seeing VERY good quality photographs, or actually seeing the reel in question, it's impossible to put anything like an accurate value on the real. Even after examination, a valuation would be, at best, an 'educated guesstimate'. In real life, the reel is worth either a/ what someone else is prepared to pay for it b/ the price you would need to pay to replace it (which may well depend upon exactly how badly you want to replace it!) Both of these are affected most of all by the condition of the reel itself, and value is usually enhanced, often disproportionately, if the original box, case, spares, documents etc are present. A while ago, I sold a similar reel via EBAY (sort of) for a price well in excess of anything I expected. A little searching on there for reels of the same type (amongst the completed listings) showed me the prices the reels had been selling for. It was apparent to me that mine was far superior, and I had noticed that a (Japanese) buyer was bidding frquently on such reels.
I contacted him with details, he asked for a price for me to sell at. Quandry ... as I still had no real idea. So ... I put on a price that I thought I'd be happy with, then added a further 25% (figuring that he would probably try to negotiate). Still not sure why, but at the last moment, before sending the email, I doubled the price ... and he still said YES without hesitation!. Could I have got more? Possibly. Was I happy to still sell at that price? At more than twice the highest I had in mind? Take a guess:-)

Tungsten is an ideal substitute of the lead fishing sinker. It's strong adhesive, semi-solid state, soft for a long term. Tungsten Heavy Alloys concentrate maximum weight in the smallest possible space. They are more often to be used as counterweight in sporting field, such as fishing sinkers, golf weights, etc.

Tungsten weights are an ideal, environmentally friendly alternative to lead weights, which are toxic and increasingly being labeled an environmental hazard. They are harder than steel and extremely dense, tungsten being on average 30 percent smaller than its lead counterpart. Meanwhile, they are smaller than conventional weights, create twice the sound of lead weights and maintain their shape for longer. Tungsten is also used in the production of other fishing applications, such as tungsten-carbide line cutters and tungsten powder coating for fishing lines.

It continues to be a major part of the economy.

butter,socks and motor oil?

You should clean the cut with water or other appropriate first aid cleaning solution. You should then cover the cut with a band aid or other suitable covering.

you should prevent cuts by being careful and being mindful of your fishing equipment.

You don't because you have to be smarter than a fish to apply.

You can find Salt-Marsh Stripers in Marshes

The force that a fishing rod goes against is pressure and flexion.