0
Ford Mustang
The Ford Mustang is a famous compact car built by the Ford Motor Company. The first manufactured Ford Mustang, a white convertible with black interior, was launched on April 19, 1964.
1,730 Questions
Where is the fuse box located on a 1985 Ford Mustang GT?
Underneath the steering column behind the plastic bezel it takes three screws undo it and your looking right at it.
What parts are interchangeable with a 1964 mustang?
65, 66, mustangs for body, up to 73 for engine and tranny is some cases, you can use fairlane, opel, sprint, shoot, that same engine was used in almost all ford cars of the time.
What year did Ford come out with the 302 Cobra engine?
Sorry, all Cobras ( 60's and early 70's ) had the 427 Cobre Jet engine, and it all started in 1968
427's were dohc motors ,, 428 .428,Cobra Jet , were dif ,,429 , 429 Boss , then there was 302 , 302 Boss in 69
What size are the speakers in a 2002 ford mustang convertible?
Convertible
Front Speakers :
High Frequency: 2.5"
Low Frequency : 5.5" x 7.5"
Rear Speakers :
High Frequency : 2.5"
Low Frequency : 5.25"
Source : http://www.flemworld.com/mach460/mach.html
Where is the door lock relay on a 2001 F250?
In fuse box under steering wheel there is a removeable panel take that off and it is #6 relay
Do wild mustang stallions kill other stallions babies?
yes 99 times out out of 100 they will kill them they want there bloobline to carry on not some other bloodline its mostly the colts they will kill but all of them really.............dont be sad it's just nature :)
How much does an Electroencephalography cost?
Costs for an EEG range from $100 to more than $500, depending on the purpose and type of test
Where is the power window relay on a 1999 Ford Mustang?
Where is the power window relay on a 1999 ford mustang?
Read more: Where_is_the_power_window_relay_on_a_1999_ford_mustang
How much does it cost to fill up just one tank of gas for a mustang?
40 dollars at 3 dollars per gallon
Mustang 5.0 backfires at full throttle through exhaust has kenne bell supercharger on it?
Too Lean. Bump up fuel pressure.
What year did they start making the mustang?
the first one rolled out on April 17, 1964, at the New York World's Fair. The basic model price was $2,368. Within a year, Ford had sold 417,000 models, most of which were hardtops.
Where can you find a Ford Mustang garden flag to purchase?
An online search of garden flag sites didn't turn up an Mustang logo flags.
The closest I could get was some cool Ford Mustang tin signs at
www.fordcollection.com - type in Mustang into the search box in the upper left at that site.
Mustang in spanish means what?
Mustang doesn't mean anything in Spanish. It's an English word derived from the Mexican-Spanish word mesteño; "stray" or "feral animal". The original Spanish world might be mestengo; referring to a beast of uncertain ownership, later used for feral animals in general.
What is faster a Nissan skyline or a Ford Mustang?
that depends on what type of mustang your talking about, if its the everyday mustang gt, then the skyline would leave it in the dust, but if its a shelby gt 500, or a saleen or something then it would be a good race but i think the mustang would edge it out in a drag race, but in a curciut race, the skyline would be too much to handle.
How much would a Ford Mustang weigh on the moon?
Gravity on the moon is 16.7% or 1/6 the gravity on Earth. Multiply the weight of the Mustang by 0.167 to get the weight on the moon. Unfortunately once you get your Mustang to the moon, you won't be able to drive it due to the lack of air.
How do you bleed the brake line after changing the brake pads in a ford mustang?
If you have not opened the brake system ie. taken off any lines or lost any fluid, you should not have to bleed a brake system. Brake jobs are best done by experienced technicians.
What is the firing order for a Ford Mustang?
Depending on the year and engine options: 1. Firing order for a 5.0 litre is 1-3-7-2-6-5-4-8 2. Firing order for the 3.8 litre is 1-4-2-5-3-6 the 1-3-7 firing order is for a 302 ho motor this help? http://autorepair.about.com/od/enginefiringorders1/
How do you replace the oxygen sensors on the 1998 ford mustang cobra?
The "front" set are ahead of the 4 catalytic assemblies toward the engine and are the fuel mixture feedback sensors. These are the most important as they directly control the EEC fuel feedback and tell the system how to tune the fuel mixture the best depending on operating conditions.
The "rear" pair are located behind the second set of cats and do not affect fuel control. Their purpose is to simply monitor the final exhaust and determine if excess fuel, beyond allowable transient conditions, exceed amounts which would indicate catalytic converter failure to the EEC-V emission control system. If they either detect excessive fuel, or are bad (rare), they will cause a check engine code and cause a check engine light. Likewise, the front sensors can do the same if either they are bad (rare), or if there is a fuel delivery issue, or any other condition affecting fuel delivery such as a vacuum leak, or possibly any modification to the induction system which upsets the system beyond what the EEC is programmed to consider normal and proper.
Note that if the EEC-V does cause a check engine light, it will also store a code indicating which of the four sensors it deems defective. A "code reader" or your dealer can read the codes in seconds.
In general the O2 sensors last a long time unless a (typically) mechanical problem exists, in most cases, excessive oil consumption due to engine wear, or possibly incorrect modification. This would almost always eventually result in one or both of a sensor or catalytic converter failure either of which will cause a system error code.
As far as replacing them, it's pretty simple. Gently unplug the sensor, and use the proper socket wrench to remove from the exhaust system.
IMPORTANT--- The front and rear sensors are NOT the same model and must be replaced with the same model.
Once the new ones are reinstalled and tightened to the required torque, the cables are just plugged back in.
FYI, it is possible to easily bench test the sensors, but it has to be done properly and carefully and such information is easily found on car enthuseist sites and is beyond the scope of this question.
