0
Jawaharlal Nehru Technological University JNTU
Located in Hyderabad, India, the Jawaharlal Nehru Technological University (JNTU) primarily focuses on engineering. It has satellite campuses in Anantapur and Kakinada. Established in 1965 as the Nagarjuna Sagar Engineering College, the university was renamed in 1972.
417 Questions
I forgot my eamcet hall ticket no who can i know your eamcet result?
If you have already filled your EAMCET 2014 Application Form but forgotten your Registration Number which is required for Hall Ticket, Result, Mark Sheet while logging into your Account then you can get your Registration Number at: http://admission.aglasem.com/eamcet-forgot-registration-number/
Mlc voters list in kakinada 2013?
kada chandrasekhar, door no 16-33-27,sambamurthy nagar kakinada ward no 8
Jntu previous papers of software project management?
1.a) What is the need for metrics? What do you mean by indicators?
b) List the seven core metrics, their purpose and perspectives. [6+10]
2. What were the metrics collected in CCPDS-R? What is the purpose of each metric? [16]
3.a) What are the five components of software cost models?
b) What are the components of a good cost estimate, in practice? [8+8]
4.a) Why does software didn't give as much returns on investment as other industries?
b) What are the ways of achieving better economics in Software? [8+8]
5.a) What are the primary objectives of the four phases of SW lifecycle?
b) What are the essential activities in Inception and elaboration phases? [8+8]
6.a) What are the seven workflows in the lifecycle?
b) What levels of activity take place in these workflows during each of the four phases (Inception, elaboration, construction and transition)? [8+8]
7.a) What are the steps in identifying project roles? Name any five project roles and the skills needed for them.
b) What are the benefits of matching people to roles? [10+6]
8.a) What are the sources of change? Why should change be made in a controlled way?
b) Define a configuration baseline. [10+6]
1.a) What are the steps in identifying project roles? Name any five project roles and the skills needed for them.
b) What are the benefits of matching people to roles? [10+6]
2.a) What are the sources of change? Why should change be made in a controlled way?
b) Define a configuration baseline. [10+6]
3.a) What is the need for metrics? What do you mean by indicators?
b) List the seven core metrics, their purpose and perspectives. [6+10]
4. What were the metrics collected in CCPDS-R? What is the purpose of each metric? [16]
5.a) What are the five components of software cost models?
b) What are the components of a good cost estimate, in practice? [8+8]
6.a) Why does software didn't give as much returns on investment as other industries?
b) What are the ways of achieving better economics in Software? [8+8]
7.a) What are the primary objectives of the four phases of SW lifecycle?
b) What are the essential activities in Inception and elaboration phases? [8+8]
8.a) What are the seven workflows in the lifecycle?
b) What levels of activity take place in these workflows during each of the four phases (Inception, elaboration, construction and transition)? [8+8]
1.a) What are the primary objectives of the four phases of SW lifecycle?
b) What are the essential activities in Inception and elaboration phases? [8+8]
2.a) What are the seven workflows in the lifecycle?
b) What levels of activity take place in these workflows during each of the four phases (Inception, elaboration, construction and transition)? [8+8]
3.a) What are the steps in identifying project roles? Name any five project roles and the skills needed for them.
b) What are the benefits of matching people to roles? [10+6]
4.a) What are the sources of change? Why should change be made in a controlled way?
b) Define a configuration baseline. [10+6]
5.a) What is the need for metrics? What do you mean by indicators?
b) List the seven core metrics, their purpose and perspectives. [6+10]
6. What were the metrics collected in CCPDS-R? What is the purpose of each metric? [16]
7.a) What are the five components of software cost models?
b) What are the components of a good cost estimate, in practice? [8+8]
8.a) Why does software didn't give as much returns on investment as other industries?
b) What are the ways of achieving better economics in Software? [8+8]
1.a) What are the five components of software cost models?
b) What are the components of a good cost estimate, in practice? [8+8]
2.a) Why does software didn't give as much returns on investment as other industries?
b) What are the ways of achieving better economics in Software? [8+8]
3.a) What are the primary objectives of the four phases of SW lifecycle?
b) What are the essential activities in Inception and elaboration phases? [8+8]
4.a) What are the seven workflows in the lifecycle?
b) What levels of activity take place in these workflows during each of the four phases (Inception, elaboration, construction and transition)? [8+8]
5.a) What are the steps in identifying project roles? Name any five project roles and the skills needed for them.
b) What are the benefits of matching people to roles? [10+6]
6.a) What are the sources of change? Why should change be made in a controlled way?
b) Define a configuration baseline. [10+6]
7.a) What is the need for metrics? What do you mean by indicators?
b) List the seven core metrics, their purpose and perspectives. [6+10]
8. What were the metrics collected in CCPDS-R? What is the purpose of each metric? [16]
Can you do master in architecture after your btech in cse?
No.
only the student having Btech in CE/ B. Desin /B Plan degree can aplly fo m. Arch
But In some universities/ colleges required Bachelor of architecture degree as pre-requirement.
Electrical technology ece 2-1 sem important questions ece?
What are the characterstics of dc generators
jghg fj0jtog g0jgi0g ggg gng g0 gg gg0ngowdba fibfpsajv0 h dgdds tsftsifff ff8f cfgf hijfihggh eg oo
Uses of automata and compiler design?
Automata is the science of state machines. State machines are (programming) entities with defined states and procedures (rules) for going from one state to another. An example might be an elevator. You define the various states, i.e. open, closed, which floor, which direction, what call buttons are pressed, etc. Then you define the rules, such as not changing directions when there is a call in the same direction. You would not define a rule for going from the first to the third floor, but you would define a rule for going from one floor to an adjacent floor. State machines are well suited to compiler design. If, for instance, you are parsing an expression, you would expect a binary operator to be surrounded by two operands. If you were parsing a while loop, you would expect the while keyword to be followed by an expression in parenthesis, followed by a statement. In automata, you design the basic machine, and provide the rules for going from one state to another. For a compiler, this makes it (relatively) easy to make changes to language syntax because you need only deal with rules, rather than thinking about wide scope procedural changes.
What scale is used in architecture and construction drawings?
Common and frequently used scales include 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500 and 1:1000. What scale is used purely depends on the situation, and what would be best suited, considering factors such as space and size.
Information technology oops online bits for2nd year 2sem 1 mid?
The use of technology is increasing day by day. Millions of young people today are doing the impossible with your mobile phone. Why are you stopping today? Start earning today the first step. You can be a successful fighter by marketing YouTube. So let's get started. At the beginning you will learn how to create a professional YouTube channel? Just go youtube and search shaikot tech help. Shaikot tech help channel have more and more information for youtube marketing course.
m.p
How many days are given as Dussehra holidays for JNTU Hyderabad Affiliated Engineering Colleges?
3 to 6 days are given as Dussehra holidays for JNTU Hyderabad Affiliated Engineering Colleges.
Should the previous retained earning show on a new year trail balance?
The previous Retained Earnings plus or minus the prior year's gain/loss will show on the new year Trial Balance.
What is date for result declaration of 1st year DAE electrical technology 2008-2009?
what is the date of declaration of result of dae 1styear 2009
What problems did you have with a previous supervisor?
Never badmouth your previous industry, company, board, boss, staff, employees or customers. This rule is inviolable: never be negative. Any mud you hurl will only soil your suit. Especially avoid words like "personality clash", "didn't get along", or others which cast a shadow on your competence, integrity, or temperament. BEST ANSWER: (If you have a job presently)
If you're not yet 100% committed to leaving your present post, don't be afraid to say so. Since you have a job, you are in a stronger position than someone who does not. But don't be coy either. State honestly what you'd be hoping to find in a new spot. Of course, as stated often before, you answer will be all the stronger if you have already uncovered what this position is all about and you match your desires to it. (If you do not presently have a job.)
Never lie about having been fired. It's unethical - and too easily checked. But do try to deflect the reason from you personally. If your firing was the result of a takeover, merger, division wide layoff, etc., so much the better.
But you should also do something totally unnatural that will demonstrate consummate professionalism. Even if it hurts, describe your own firing - candidly, succinctly and without a trace of bitterness - from the company's point-of-view, indicating that you could understand why it happened and you might have made the same decision yourself. Your stature will rise immensely and, most important of all, you will show you are healed from the wounds inflicted by the firing. You will enhance your image as first-class management material and stand head and shoulders above the legions of firing victims who, at the slightest provocation, zip open their shirts to expose their battle scars and decry the unfairness of it all. For all prior positions:
Make sure you've prepared a brief reason for leaving. Best reasons: more money, opportunity, responsibility or growth.
Lateral entry to mbbs after bsc nursing in India?
The Syllabus of BSc Nursing course is almost equivalent to MBBS Course in India.The course covers almost all the subjects like Physiology,Micro Biology,Anatomy,ENT,OBG,Dermetology & Skin Diseases,Community Medicne,Psychiatry,Psychology,Medical Sociology,Computer Science, etc...But istead of medicine,Nursing gives importance to medicine.For Example instead of Community Medicine,Nusring Students studies Community Nursing.This is the only difference.Same like Medical Students,Nursing students also getting Cliniocal Training.
Nursing Students can take their Medical Degree within 2/3 years from European university.Ukrain,Ireland etc..providing Lateral entry to MBBS for Nursing,Physio Therapy and Dental Graduates.
A CET Exam is a physical examination of any import entering the territory of the United States. In particular CET stands for Contraband Enforcement Team. Should your import become subject to a CET Exam you can expect that it will be transported to a Customs Examination Station and undergo an actual hands on physical inspection. Many times narcotics dogs and X-ray machines are implemented in searching for items that are not allowed into the US. i.e., drugs, weapons, WMD.
Syllabus for MBA 2nd semister jntu hyderabad?
Kindly refer to the University curriculum for the syllabus outline.
Ece Tunc has broken the world record... THE UGLIEST HUMAN ON THE PLANET!!! She is ugly because she had plastic surgery when she was young so now her face is HORRIBLY UGLY!!!
