Mechanical Engineering

I am looking for same equivalent material spec............if you already got information, can you share?

Ductility is a physical property because it can be observed without a chemical change to the material. For instance, if we are working with aluminum to calculate its ductility, whatever we do to the aluminum metal in the process, it will still be aluminum metal.

In industry erosion is a destruction of a material due to an influence of elements, that have high speed. For example, in turbomachinery erosion can be detected on the blades of turbines or compressors. It's appearance is related to presence of particles of water (as a rule) in steam/air, that move with a high speed against the blades, causing destruction of the latter. Usually it looks as small chipmarks on the surface.

Erosion causes loss of efficiency of blades, and finally - can cause its' complete destruction, and as a result - severe damage of the machine.

Granted that the force was enough to crack the pipe, it would crack in the middle.

I can answer it generally. The guages were set up to be the area of sheet metal required to get a certain weight. With thicker sheet metal, you don't need as much area to get to the weight, so the guage number is lower.

manufacturing process of steel plates

difference between heat and product analysis ?

The hot plate's temperature is higher than 100°C. That is why the 'steam bubbles' form at the bottom of the pan, then float up to the top. All of the water surrounding the jar is at 100°C. As soon as a quantity of water turns to steam, it's bubble rises to the surface and is released into the surrounding air. The water that's touching the jar has not yet boiled, so it has less than enough energy to cause the water inside the jar to boil.

What was last year cut off meerit of every engineering college in mumbai and navi mumbai for 2nd year degree admission in electronics and telecoms course?

During my engineering i am not much career oriented,but after my graduation i am having a tremendous interest in banking due to my family background.Apart from that since banking is a back bone of any country,so i really want to be part of it.As banking offers tremendous growth opportunity.Bank employee have respect in society,since there is direct interaction with customers.one of the major reason is job security especially in public sector bank.Last but not the least banking provides challenging work environment.

If we install centrifugal pump to transfer liquid from tank,after empty out the tank pump is continiously running,then how much vacuum is created in tank?

Based on practical experience, deaerator manufacturers will aim to vent 22,4 kg / h of steam/air mixture per 1.000 kg / h of deaerator capacity.

In welding technology a Pulsed MIG is a touchless transfer method concerning the electrode and the weld puddle, completed by forming one droplet of metal at the end of the electrode per pulse. Just the right quantity of current is added to drive that one droplet across the arc and into the puddle.

I suggest Machining Center, Inc from Brighton, Michigan. They are very reliable and cost effective.

Drive screws are more commonly used in place of nails in building today. The screw has a Phillips or square drive head, and is driven in with a drill.

The roller bearing dates to at least 40 BC, and it was applied to pulley blocks sometime in the dim past of history. There is probably no way to know when someone first put a roller bearing into a pulley block.

The heat distribution throughout the arc is different in case of the CO2 gas than Argon cause by the high heat conductivity of the CO2. In addition, the CO2 dissociates at high temperatures (in the arc) and then recombines when the temperature drops at the workpiece level. The recombination is an exoterm reaction which yields the heat taken at the dissociation In this way there is an additional heat gained at the level of the work piece which gives higher penetration. This happens only with bi-atomic gases (CO2).

See here for conversion calculator

http://www.chapelsteel.com/ksi-mpa.html

For a given pipe size, schedule 160 would have the smallest ID (and thicker wall). Wall thickness and pressure rating goes up with increasing schedule number, causing the ID to go down with increasing schedule number.

The compressive strength of Phosphor Bronze is directly proportional to the tensile strength, For example 1/2 hard phosphor bronze has a Tensile Strength of 60 to 75 ksi and a Yield Strength of 45 to 70. For typical engineering calculations, the compressive strength can be considered equal to the yield strength.

It stimulates the economy and expands business.

it creates employment

provides business with a ready market where it can channel its product in bulk

reduces level of waste or garbage

A lift in free fall is the same as a lift with no gravity (e.g. in space), i.e. accelleration due to gravity, g = 0 ms^-2.

Now your intuition should tell you what's going to happen but even if it doesn't you can plug this value into your equation for the pendulum's period to find out what happens.

i want to irf 3205 capacity for drawn curent.

Red wigglers, popular composting worms, can be found in leaf litter, tools and in the subsurface. They do not burrow down deeply. The conditions they need are damp, dark conditions such leafed thin the ground cover of leaves, and even within manure piles on farms. They are highly adaptable, though, and can be found in rainforests, grasslands, bushland, all within a range of climates.

There is not animal called a hylam. You may be confusing this with a genus of frog called hyla: noun a tree frog of a widespread genus, typically bright green in color. • Genus Hyla, family Hylidae: many species.