0
Mechanical Engineering
Mechanical Engineering is a branch of engineering that encompasses the generation and application of heat and mechanical power and the design, production, and use of machines and tools. Mechanical engineering involves application of the principles of dynamics, control, thermodynamics and heat transfer, fluid mechanics, strength of materials, materials science, electronics, and mathematics.
10,989 Questions
What is the formula of fuel consumption in diesel generator?
Here is the formula,
Per hour consumption = Diesel consumed / Total DG run hours
Diesel consumed = Previous closing balance - Actual closing balace
Daily DG run hours = (Total DG run hours / (DG capacity*24 - Total DG run hours)) * 24 / (( Total DG run hours / ( DG capacity * 24 - Total DG run hours )) + 1
Regards,
Shibin
shibin.hesel@gmail.com
Is heating a piece of steel until it glows reversible or irreversible?
Heating steel detempers it, it makes it softer.
What is the cost of a cnc machine?
The cost of a CNC Macahine is decided on models. The big models can cost you anywhere between $40,000 and $145,000. The small models cost $2000 to $5000.
It depends on which campus you plan on applying to. Click on the related links section (College Board) indicated below this answer box, click on the campus, then cost, and you will be able to get your answer.
CAM is Computer Aided Manufacturing, and is associated with CNC machines (Computer Numeric Control). CAD is Computer Aided Design, which is making drawings and plans using software on a computer instead of on paper. There is also CAE, Computer Aided Engineering, which is computer simulation of physical objects and events.
Actuators are used for the automation of industrial valves and can be found in all kinds of technical process plants: they are used in wastewater treatment plants, power plants and even refineries. This is where they play a major part in automating process control. The valves to be automated vary both in design and dimension. The diameters of the valves range from a few inches to a few metres.
Advantages of simplified representation in ProE?
With a simplified rep, less of the model data is loaded into memory. Computer performance is improved.
Uphand welding is welding with the electrode pointing upwards, above the hand.
What are some examples of an everyday robot?
Car manufacturing uses a lot of robotics to make it faster, less expensive, and more precise. Welding specifically, for example, is easier done by robots as they are made to withstand higher welding temperature, are more precise than human hands.
About how many steel beams are in a 80 story skyscraper?
More than a few.
Research it-it'll do you good; its better than getting fast answers here.
What is the difference between pipe and hoses?
Generally a hose is flexible and a pipe is not.
I was laying pipe in your girlfriend last night...
whereas she and her friends are hose.
I hope that helps.
5 examples of mechanical energy?
5 type if mechanical energy are... kinetic, potential, heat, vibrational, translational
How do you make a laser that can weld metals?
Your best bet is a CO2 laser using an O2 jet. However, I doubt if any but the most determined could hobbyist could build that powerful of a laser. Still, CO2 is your best bet.
What word describes a metal spike that may be hammered into ice?
answ2. An ice piton would be a metal device hammered into the ice. An ice piton would usually be under 150mm in length, and consists of a spike, and a formed hole at the 'hammered' end. used as a securing device.
An Ice Screw would be another type of securing device, in this case screwed into the ice. This would a tube of about 400 mm long and 30mm diameter, and with a sharp screwthread running down the outside. it is screwed into the ice, and will also have a securing loop at the head.
An ice Axe is a climbing tool, with a shaft from 400mm - 1200mm long, and with a head consisting of an adze blade used for chopping steps in the snow/ice; and also a pick as part of the head, and is used also to chip away at ice.
At the foot of the shaft, there will be a spike which is also used for support.
Often an ice axe is mistakenly called an ice pick. But hopefully, never by an outdoors person.
An ice pick, is a device about the size of a screwdriver, and is used for handling (or breaking) chunks of ice at the table. Somewhat obsolete with modern refrigeration, and the demise of the ice-man who delivered large chunks of ice.
A1. an ice pick? So words such as annoyed (the spike is hammered into the rock so that it is secure, using a belay device)
What makes stainless steel and steel different?
Steel is simply iron with a small percentage of carbon. It oxidizes (rusts) easily. Stainless steel has added chromium, but also may contain any of the following: nickel, niobium, molybdenum, or titanium. Stainlees steels form a very thin layer of chromium oxide on the surface which protects it from further oxidation. While stainless is not stain-proof, it does stain less than carbon steel. Most stainless steels are non-magnetic, or very weakly magnetic.
Slocum Enterprises, Inc. is a supplier of Veterinary Equipment, Implants and Diagnostic Aids and provides drill guides and other products for surgery on animals. I don't know if they ever actual made a drill but they make saws and as I said above drill guides so this might be your answer, not sure.
If your best friend steels your boy friend is she your best friend?
No, if she lies to you, then that means she's a two-faced back-stabber. If she also admits that she stole your boyfriend, then you don't need to hang out with her anymore.
Dry saturated steam is in a semigaseous state?
No.
If you refer to the Temperature/ specific entropy (T - s) diagram for steam, the line segment to the right of the critical point (the point of zero gradient) of the curve is called the dry saturated line and the left segment is the satuated vapour line. As self-explanatory as it sounds, dry saturated steam is on the dry saturated line depending on the given temperature or pressure.
The quality (dryness fraction) on the dry saturated line is by definition 1, that means there is no portion of it as vapour. Hence it is in a fully gaseous state.
How fast does a 767 airplane fly?
* Maximum Speed: 568mph / MACH .86 (913km/h , 439kn) at 35,000 ft. * Maxiumum Cruise Speed: 530mph / MACH .80 (851km/h , 470kn) at 35,000ft. Link: http://en.wikipedia.org/wiki/Boeing_767#Specifications
What is the value of a 2002 Honda 300Ex with a blown motor?
You aren't going to attract a wide range of buyers with a blown motor. The worst part is that most people that buy ATV's buy somewhat local, because they don't want to pay shipping costs. So you are trying to attract a local market with a broken machine. Basically what you have as far as value is plastics and wheels and tires. You could probably part it out and eBay it, but no matter what, you will probably be disappointed with the results.
You aren't going to attract a wide range of buyers with a blown motor. The worst part is that most people that buy ATV's buy somewhat local, because they don't want to pay shipping costs. So you are trying to attract a local market with a broken machine. Basically what you have as far as value is plastics and wheels and tires. You could probably part it out and eBay it, but no matter what, you will probably be disappointed with the results.
I just bought an 01 in simerlar condition for $250
Why Cooling System in Wind Turbine?
Today's power generation, conversion, and distribution require effective cooling. As heat loads continue to increase, manufacturers of wind turbines are turning to liquid cooling to remove high watt density heat loads. Cold plates, heat exchangers, and ambient cooling systems are a few of the cooling technologies used for liquid cooling in power applications.
Power generation requires cooling techniques due to the vast amount of heat that is emitted in the production and transmission of power. The energy transformers used in the wind turbines depend on climatic conditions which affect the performance of the transformers.
