Mechanical Engineering

Tare as mai vrea si eu sa stiu .....

there are three major types vanes are used for a centrifugal pumps those are

1.forward curved vanes

2.backward curved vanes

3.flat vanes

Dear actually it depend on its application. Where do you want to use them..

Compression Load Cell is considered as one of the best and long performance load cell.

and Double Ended shear beam load cell is widely known for its smooth operations.

cyclone is used for to recycle the unburnt and heavy particles into com-buster

it is as like as viscous liquid so the angle of repose for it under 30 deg

Pilot lot is more like prototype products manufactured and inspected and validated.

If the output is a bunch of small products like caps, tooth brushes. Pilot lot is the first batch of caps or brushes made and validated. It will be inspected for all characteristics that the customer need and will be shipped with first consignment to the customer.

Pilot lot is also known as first article/ first batch. Customer might also insist to make a pilot lot inspection to the supplier when there is a change in drawing/specification in the order.

CV Stands for Control Volume Only in Thermodynamics and it is a fixed region in a open systems. The region of space enclosed by The open system boundaries is called Control Volume.

for welding dingeberries

A kenotometer is an instrument used in steam turbine condensers to measure the vacuum in the steam space of the condenser. The vacuum achieved by the condenser has significant influence on the efficiency of the steam turbine.

In short

Killed or fully killed steel (steels are also produced as semi killed steel) normally uses Si & Al for completely stopping (killing) the reaction between carbon and oxygen in molten steel.

1. Addition of small amount of Al helps in refining the grain size which in turn increases toughness of steel, an important requirement for steel against low temperature brittleness.

2. Killed steel is also comparatively cleaner (freedom from inclusions, stringers, etc) and therefore have better properties.

En 8 Stands for Euro - NOrm

The Pneumatic cascading method system is to use the combiintaion or hybrandising the positive extending force and negative retracting force of a double active cylinder using hyrdopneumatic systems or purely pneumatic air system that operate differentiable tool operations by clamping ,shaping ,drilling etc as crusaded combinations as per our requirements.A positive sign indicating an extending and negative sign indicating a retraction with metering in and metering out circuits .A secretiv algorithm with pulse coded PLC system may be developed using a security gray coded or mnachester pulse combinations as sectert coded PLC circuits out of LED,Magneticffield ,piezoelectric Coanda effective or magnetic field levitated NANO technology having a servomechanism by a small force or pulse operating a magnified force using Linear Variable Differential Transfornsfor inductive opposite windings controlled by movable armature to correct the error for zero corrections.

Sankaravelyudhan Nandakumar,Assistant professor,MET Engineering College ,Pneumatics Laboratories

The fill port is below the seat on the right hand side.

Boiler have minimum pressure 28 bar as per. Indian boiler act.so p c xan not call a boiler

take the outside diameter and subtract the thickness twice.

A leak around the release screw most likely culprit.

Yes

the difference is the max load which the material will withstand until failure 52 stands more than 37

Ask a mechanical engineer. People's lives often depend on the answer and some random guy on the internet that isn't bonded, licensed, or hasn't even graduated high school could provide you with an answer indistinguishable from a real equation.

The applied load refers to the load which acts on a structure at a given location or series of locations. The reaction is that which balances the applied load at the specific boundary (reaction) loactions. The sum of the applied load is equal to the reactions in the axis of application. For equilibrium, the sum of all forces and monemts are zero, so reactions may contain moment terrms under applied load, even if the applied laod has no applied moment.

The function of a fusible plug or soft plug is to relieve exceeded pressure inside the vessel allowing it to escape to the fire box extinguishing the fire and lowering internal pressure. The boilers I've owned have had ASME stamps on the plug and are required to be replaced every two years. The inside is not to be refilled if ruptured. The lead tin alloy is designed to melt between 440 and 450 degrees Fahrenheit. Cost on a 3/8 npt is around $80.00 Sellar industries manufactures them in lots so keep a spare ! There are two kinds a standard plug that is screwed into a flue (the water is exposed to the stamped side which its screwed into) or the fireside type (this one the stamped side is exposed to the fire box). I've used these on a flue-less boiler. It was a look out made in Tenn. that had inspection dates beginning 1858 1860 1906 1908, the dome stamp was 1 8 2 8 .in 9012 she was 184 years young and would have passed commercially @ 289 psi. Inspector gave it 125 psi for historical boiler use. This is a 100 psi vessel.

thanks for stopping by

You might be looking for the word alloy.

function of SnCl2 is that it acts as a reducing agent to reduce FeCl3 to FeCl2 and function of HgCl2 is to oxidize SnCl2 to SnCl4. total iron is determined after reducing ferric iron to ferrous state.

Turbine diffusers are configured to improve pressure recovery within the turbo machinery. The diffuser both converts the non-uniform flow off the impeller into a uniform velocity profile and converts the dynamic energy of the flow into pressure with minimal losses. With an effective diffuser, the rotor exit static pressure will be less than the discharge value which increases the total/static pressure ratio of the turbine. With this increase in total/static pressure ratio, the total to total pressure ratio is reduced, but the overall turbine efficiency is improved..

Turbine diffusers are configured to improve pressure recovery within the turbo machinery. The diffuser both converts the non-uniform flow off the impeller into a uniform velocity profile and converts the dynamic energy of the flow into pressure with minimal losses. With an effective diffuser, the rotor exit static pressure will be less than the discharge value which increases the total/static pressure ratio of the turbine. With this increase in total/static pressure ratio, the total to total pressure ratio is reduced, but the overall turbine efficiency is improved..

For more information Read the Handbook of turbomachinery (Joseph Sherma, 2003 pg 342-348):

Abrasion resistance is low.