Renault Scenic

Plip Key Re-SynchingThis applies to cars that are too old for transponder keys, e.g. ph1 Meganes.

If the keys battery dies and the key is no longer synchronised.

What does that mean?

That means when you try and plip open the doors it won't happen and you will also not be able to start the car, like I said before newer cars have a transponder key so if the car doesn't start the keys wrong or the aerial around the ignition barrel is dodgy.

The immobilizer light in the dash will flash quickly if you try and start the car

the light is caught in action in this pic.

So what do I do?

Well you need to get the keys code.

You need to open the key to get this

that's a key believe it or not and that key ring is a girls key ring, that girl is my mrs so no comments about a love heart key ring to me please!

When you open the key this is what you will find

my finger is actually pointing to the numbers, you can't make them out in that pic due to the fact its a camera phone but the number is there, get it and write it down.

Then pop down to your local friendly Renault dealer. Ask for the code, they might be reluctant to give it to you but theres a space in the handbook for it and remind them that the code is the property of the car not Renault, if they refuse to give you it or try and charge you a fortune then tell them the small claims court will come down heavily in YOUR favour.

You can use our program to calculate your own code here

So now you have your 4 digit code. In you fat sweaty/well manicured delete as appropriate hand.

Now you need to put it in.

Turn the ignition on, this means dash lights all on and the immobilizer light is flashing quickly.

We shall assume you have a code of 1234

press and hold the central locking button, the flashing will stop then the light will flash again.

Hold it until it flashes once

let go

press again until it flashes twice

let go

press again for 3 flashes

let go

then finally press for 4 flashes

the code is now entered

after you put the last digit in the light will come on then go off for about a second then come back on, this time it will stay on for 30 seconds.

You can now start the car.

If you wish to re-synch the plip enter the code.

When you put the final digit in the light goes out comes back on and back off again (i.e. the 30 second interval) press and hold the central locking button again and the doors should lock and unlock, remove the key and plip away at the sensor, in about 3 tries the doors should lock and unlock again.

The key should now be re-programmed and work as it should.

please follow the instuctions

CLIO II, KANGOO & MASTER INFRA RED RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds. Note :

the door should lock then unlock.

3. When this happens, 10 seconds is allowed and the immobilizer warning

light illuminates.

4. Point the 1st key at the receiver and press the button twice, the doors

should lock and unlock. Repeat for other remotes as required.

5. Check the remote control unlocks and locks the doors.

LAGUNA II & SAFRANE II INFRA RED RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds. Note :

the door should lock then unlock.

3. When this happens, 15 seconds is allowed and the immobilizer warning

light illuminates.

4. Point the 1st key at the receiver and press the button once, the doors

should lock and unlock.

5. Point the 2nd key at the receiver and press the button once, the doors

should lock and unlock.

6. Check the remote control unlocks and locks the doors.

CLIO II, KANGOO & MASTER RF RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds. Note :

the door should lock then unlock.

3. When this happens, 10 seconds is allowed and the immobilizer warning

light illuminates.

4. Press the remote control once, the doors should lock and unlock.

5. Repeat for second remote if required.

6. Check the remote control unlocks and locks the doors.

LAGUNA II & SAFRANE II RF RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds. Note :

the door should lock then unlock.

3. When this happens, 15 seconds is allowed and the immobilizer warning

light illuminates.

4. Press the remote control once, the doors should lock and unlock.

5. Press the second remote control once, the doors should lock and

unlock.

6. Check the remote control unlocks and locks the doors.

CLIO RE-SYNCHRONISING

1. Lock Car manually

2. Unlock Car manually

3. Insert key into ignition within 30 seconds.

4. Turn Ignition and start vehicle.

MEGANE RF RESYNCHRONISING

Hold the remote control button down for longer than 10 seconds (until the red telltale

light on the key extinguishes) then press it again 3 times.

Check that the doors lock and unlock correctly.

MEGANE WITH EARLY REMOTE (LED SWITCHES OFF WHEN HOLDINGBUTTON DEPRESSED)

1. Ignition ON

2. Press and hold the central locking button for 5 seconds

3. LED on the dash board will go off, come back on and begin to flash.

The flashes correspond to the first digit of the 4 PIN security code- release

the button when the first digit has been "flashed" and then press

the button again.

4. Wait for the second digit to be "flashed" then release and re-press the

button - continue until all digits have been entered.

5. If you have entered the code correctly the LED will then go out and the

car can be started- to code the remote, switch off the ignition and

press the central locking button again.

6. Press remote button 2 times within the immediate vicinity of the pick

up (in the roof) On some vehicles you may need to switch the ignition

back on to achieve this however.

MEGANE RF RESYNCHRONISING

Hold the remote control button down for longer than 10 seconds (until the red telltale

light on the key extinguishes) then press it again 3 times.

Check that the doors lock and unlock correctly.

hope this helps tom