Wireless Networking and WiFi

- WEP

Wired Equivalent Privacy (WEP) encrypts and secures wireless data transmissions between clients and access points in WLANS.

If you have a wireless router it's very easy to do. But you will need one lan cable to connect the desktop to the router. Just connect the desktop to the router using the cable. Connect wirelessly both laptops to the router. Make sure that DHCP server is on. If it's not on you will have set up ip addresses manually.

If you have a switch you will need three lan cables (one per each computer). And you will have to set up all ip addresses wirelessly.

Without a switch or a router you can do it to but you still need a lan cable. You have to set up ip addresses manually and use the cable to connect one of laptops with the desktop.

PS: If you set up ip addresses manually all of them should be from the same subnet. For instance, first laptop has the ip address 192.168.1.1, second one 192.168.1.2, the desktop's ip address is 192.168.1.3

The mobility anchor point is a node in the latest version of the Mobile Internet Protocol. The MAP aids in mobile handoffs. It does not require a specific location â?? as long as it is located within the hierarchy of routers, it will work. This also helps the MAP to update more quickly and have a more efficient handoff.

brings more air into contact with the receptors..

wireless conectivity is t6hings like bluetooth things that can connect with other devices without wires connected

The advantage is that you may find sites to connect to the Internet without charge.

The disadvantage is that is takes time, energy, possibly gasoline (if by car), and then money.

There are different kinds of printers. Some of them can be connected directly to network. If you have one of them just to that and then using ip address or name of your printer connect to it. If your printer cannot be connect directly to network, connect to your desktop and in the printer's properties choose share. After that check your network environment for shared printers, when you see what you are looking for double click on it, and you are all set.

One can read reviews for a Netgear wireless adapter by going to the Amazon website. The website has user reviews of products such as Netgear wireless adapters.

true

how good/bad the connection is

In 04 Verizon signed a deal with Circuit City to be in 570 stores. How ever since then they have closed several stores.

To avoid interference from devices such as wireless telephones you need to switch the channel your network uses. How you do this varies depending upon which make of router you are using. In general you would log into the router via a web browser, change the channel (usually under Wireless or Network settings) and then save your new settings. You may have the option to select Automatic channel selection which may be suitable for your needs.

a MAN (Metropolitan Area Network) is a wireless network with roughly the coverage of a city.

First the teleprinter takes the letter you put in to it and picks a random letter to add to it, then sends the new letter to the other printer and the presses is undon Writen by a 12year old.

Windows 98 will detect that a card has been plugged in. Whether or not it can USE it depends on whether the card has Windows 98 drivers available, and if you have installed them correctly. Most wireless A, B, and G cards have Windows 98 drivers, but very few N cards do.

I can get 125 feet outside of my house and still connect to my 3G enabled router. I got additional range by locating the router upstairs in the house. The router uses a Sprint 3G USB modem that can be removed and used directly in a laptop if you want mobility.

It's transported with wireless protocols (802.11 standards) through the air on different frequencies. Most common frequency used for wireless data is 2.4 GHz. Many newer wireless technologies are moving to different frequencies due to congestion on 2.4

You are supposed to remember that or write it down. If you do not have the key, you will have to set up a new one.

Yes, If you have a Modem

Wireless networking has a few ups and downs. The most notable is that cable does not need to be run in order for the network to exist. Computers are able to connect to the internet and communicate amongst each other without the need of CAT5e or CAT6 (Gigabit) being run to a Router, Network Switch, or Hub. This allows the network to serve a decent area and makes setting up a home network easy. Prior to wireless networking one would have to run cable to the computers in each room to a "gateway". Another positive is that WiFi networking (now-a-days) is quite easy to setup. Any home user is capable of setting up a multiple computer network via WiFi. Now with connection wizards and the such, one is able to configure a wireless network in under 30 minutes.

Now for the downfalls to wireless networking. One of the biggest ones is connection security. Broadcasting information wirelessly results in the ability for the information to be intercepted and captured. This is where wireless security steps in. There are numerous types but as a general rule of thumb, No important information such as Social Security numbers, Bank Account or Credit Card information should be transferred over a wireless connection. Even if you use WPA2-AES (one of the strongest forms) confidential, classified, or sensitive information should not be transferred via a wireless connection. A skilled hacker can also hack your wireless network, and use it for their possible misdeeds including downloading pornography, using it to attack another network and even steal your information. Another caveat to the use of wireless networking is range. Most wireless networks have limited range without the use of numerous AP's (access points) or antennas. (this also affects security) The amount of walls and their contents can affect signal reception as well.

If you are using non-secured or WEP type of network, it's more than possible.

If you have a laptop, there should be an a button for wi-fi on/off, switch it off then on and on the screen you see the menu click on the menu for the link on the settings

1. The router ID is used to uniquely identify each router in the OSPF routing domain.

2. If no loopback interfaces are configured, the router chooses the highest active IP address of any of its physical interfaces.

You should use the following:

username: admin

password: password

If that doesn't work then reset the router and try again. It should work.