answersLogoWhite

0

🧑‍💼

Architecture

Art and science of structural design. Architectural responsibilities include both feasibility analysis and aesthetic considerations.

2,850 Questions

What are some things that go up and down?

When you have a relation ship with someone it canbe hard sometimes. Things that make your relationship go up are talking more, forget about the people you hate and focus on the ones you love and dont be scared to tell them you love them cause then your relation ship goes way up. Things that make them go down is being mad at them for something stupid, always talking about the people you hate and just little things like that. To keep your relationship up just focus on the things your partner loves.

What is an auditorium?

theature has the green room ,n its mre for the performance base structure where as the Audi is the speetch base structure

theature has the green room ,n its mre for the performance base structure where as the Audi is the speetch base structure

What is the ideal degree of slope of a vehicle ramp?

Taking a thin length of wood or similar, place end of wood to the front inside of the front tyre where it meets the floor. Lift wood until it is just below bottom of front skirt or whatever is the lowest point on the vehicle in front of the wheel. Hold in this position and measure the angle of the bottom of the wood to the floor. This is done at the front inside of the tyre. Calculate height required and length required of ramp to maintain this angle. This is the ideal slope for the ramp.

What is aerospace architecture?

Aerospace architecture is broadly defined to encompass architectural design of non-habitable and habitable structures and living and working environments in aerospace-related facilities, habitats, and vehicles. These environments include, but are not limited to: science platform aircraft and aircraft-deployable systems; space vehicles, space stations, habitats and lunar and planetary surface construction bases; and earth-based control, experiment, launch, logistics, payload, simulation and test facilities. Earth analogs to space applications may include Antarctic, desert, high altitude, underground, undersea environments and closed ecological systems.

What are true roots?

Roots are the part of the plant below ground that provide anchorage and transfer nutrients to the plant.

In mathematics, roots are the solutions to a polynomial function that equals zero. The word 'Root' is also be used as an abbreviation for "square root", for example √100 is often read as "root one hundred."

What are disadvantages of self compacting concrete?

One of the disadvantages of self-compacting concrete is that it can be quite costly. When it is mixed with other forms of concrete it can break down over time.

How thick is 26 gauge steel in mm?

For a wire classified under American Wire Gauge standards, 26 gauge wire is 0.0159" (0.40386 mm) in dameter.

For a wire classified undere metric wire gauge standards, a 26 gauge wire is 2.6mm in diameter. Metric gauges are calculated simply by multiplying the diameter, in mm, by 10 and therefore increase as the diameter increases, unlike the AWG standard.

Materials that have a high tensile strength?

High strength tensile bolts are used for extreme projects the types of things you cannot risk falling apart. They are typically made out of steel.

Is timber a ductile or brittle?

Timber is very strong and can be used for structural building. It is very easy to use and it is very useful.

What is the largest man made harbor in the world?

Two ports vie for the title of the largest port in the world depending on how they are evaluated. If the measuring standard is based on weight or "tonnage," the largest port in the world is Shanghai, China. Where as, if the measuring standard is the TEU, the shipping "standard unit of measure, then the largest port in the world is Singapore, Singapore.

Is granite cooler than marble?

Granite is harder and stronger than marble. It resists scratches and does not react as easily to acids, such as tomato juice and vinegar. Because of its mottled pattern, granite can typically hide stains better than marble.

What is the difference between riveting and spot welding?

A riveted joint with single rivet and a bolted connection with single bolt are perfect pin-joints. When number of rivets/ bolts along the axis of member increases, the degree of restriction to rotation gradually increases and becomes a rigid joint, which prevents rotation by offering moment reaction.

What advantage does galvanised pipe have over black mild steel?

Great material for oil lines /natural gas /steam / hydronics / condensate /chilled water piping /air

What is the tellest man-made structure in the world?

The tallest man-made structure in the world is The Burj Dubai in the Dubai, United Arab Emirates. It is still under contruction, but when finished, it will be 2,684 ft. tall. But the tallest man-made strucute that is completely finished is the Taipei 101. It is 1,671 feet in height.

What is a switchgear room?

A switchgear room is a room in a building which contains switchgear. It is typically a locked room in the ground floor of a building where the service enters the property. It would usually contain the supply authority's meters and the main protective devices (fuses, breakers) for the building's electrical installation. The room should not be used for storage or any other use.

A different answer

A switchgear room is an enclosed space - within an electrical power generating station or substation - in which are located high-voltage circuit breakers, protective relays, battery supplies, etc. The types of circuit breakers located inside switchgear rooms are indoor types and not suitable for locating in the substation compound. In the UK, these types of circuit breaker are typically metal-clad 11-kV oil circuit breakers (OCBs), and are supplied from primary (33/11-kV) transformers located in the substation compound and, themselves, supplied from outdoor-type 33-kV circuit breakers in the same compound.

Difference between footing and foundation of a structure?

The footing lies on the ground around the base of the structure. The Foundation cn go way below with pilings deep into the ground.

I can say that the footing is the part of foundation which transfers the load directly to the soil and foundationis the part of structure below the plinth level including the footing while footing is the part which is below the ground level.