Cleaning

To remove brown water stains from a solid creme linen shower curtain without risking bleaching, you can create a paste using baking soda and water. Gently rub the paste onto the stained areas, then rinse thoroughly with water. You can also try using a mild vinegar solution to remove the stains effectively.

One effective way to remove stains from concrete is by creating a paste using baking soda and water, then scrubbing the stained area with a brush. Alternatively, you can try using a commercial concrete cleaner or a mixture of vinegar and water for tougher stains. In some cases, pressure washing may also help to remove stubborn stains from concrete surfaces.

Actually, it's better not to use Laundry detergent since they can destroy the cloth and is pricey for the pocket. I think that you should try websites that advise you on how to make ordinary things like lemons to clear certain stains. Actually, it's better not to use Laundry detergent since they can destroy the cloth and is pricey for the pocket. I think that you should try websites that advise you on how to make ordinary things like lemons to clear certain stains.

Arm and Hammer detergent is low-sudsing, meaning it produces less foam compared to traditional detergents. This is intentional as it helps with rinsing and ensures that clothes are thoroughly cleaned without leaving residue.

Blot the semen stains with a clean cloth to absorb as much as possible. Then, take the comforter to a professional dry cleaner for specialized treatment to remove the remaining stain without damaging the fabric. Avoid using water or cleaning products at home to prevent further damage.

The chemical equation of shampoo is not a fixed formula, as it can vary depending on the specific ingredients used by different manufacturers. However, a basic equation might involve surfactants (like sodium lauryl sulfate), conditioning agents, preservatives, fragrances, and other ingredients mixed with water to form a shampoo solution.

To remove salt stains from nylon boots, mix a solution of equal parts water and vinegar. Dip a soft cloth into the solution and gently wipe the salt stains off the boots. Allow the boots to air dry completely before use.

For big projects there are commercial products like "Dynasolve 165" available at http://www.dynaloy.com. Their products are custom formulated for specific epoxies and applications. Their service seems great, but their prices for small quantity orders (1-qt) are not inexpensive.

Methylene chloride (aka dichloromethane) is reported to soften epoxy over time, especially is certain blends with alcohols plus detergents.

There is a US Patent #4278557 for a mixture of 45% by volume methanol, 40% by volume dichloromethane, and 15% distilled H2O for dissolving & removing epoxy resinous compounds. see http://www.freepatantsonline.com/4278557.html

Dimethylformamide (DMF) attacks epoxy more aggressively than methylene chloride

There is a relatively inexpensive blended product called "Attack" that consists of DMF in acetone. It claims "dissolves epoxy and polyester resins" and reportedly works well enough on most epoxies, though probably more slowly than the Dynaloy products.

Spray N Wash was invented by Texize, located in Greenville, SC. But Texize is no more either. All brands but Glass Plus and Spray N Wash were sold to SC Johnson. Those two were sold to Reckitt.

You can try using a soft cloth dampened with warm water and mild dish soap to gently scrub the black marks. If that doesn't work, you can try using a pencil eraser or a magic eraser to remove the marks. Be cautious not to use anything too abrasive that could damage the floor.

Often pre-soaking the load with an oxygen or enzyme based product before washing regularly will remove the smell. Some products you may want to try are Clorox 2 or Oxy-Clean. They have both worked well for me in the past.

You can remove polyurethane from fabric by scraping off the excess using a rubber scraper. Use the blade of a sharp knife to further remove the top layer of polyurethane. Then, apply acetone to the stain and allow it to work for 10 minutes before rinsing the fabric with water. If the fabric is white, soak it in bleach and water for 30 minutes, then wash as usual.

The ingredients in Tide Liquid Detergent are water, alcoholethoxy sulfate, linear alkylbenzene sulfonate, propylene glycol, citric acid, sodium hydroxide and borax. Other ingredients include ethanolamine, ethanol, alcohol sulfate, polyethyleneimine ethoxylate, sodium fatty acids, diquaternium ethoxysulfate and protease. Tide detergent is also made from diethylene glycol, amylase, sodium formate and fragrances.

Mix equal parts of hydrogen peroxide and water in a spray bottle, then spray the solution onto the stain. Gently scrub the stained area with a soft brush or cloth, then rinse with cold water. Repeat the process if necessary and air dry the sweater.

Bleach will weaken the fabric, as I found out. Try this first. Old fashioned Dial soap, the yellow kind. Dampen the stain, rub the soap into the stain, then scrub between the hands with hot water. If it is a food or grease stain, it should come right out. Rinse, then wash normally. This method gets out stains that have been ironed in, even in synthetics.

Washing soda, also known as sodium carbonate, can be used as a substitute for borax in laundry detergent recipes. It helps to boost the cleaning power of the detergent and soften hard water. Just be cautious of using it with delicate fabrics, as it can be harsh on certain materials.

It is biodegradable. * It is not suitable for washing when the water is hard. * A large quantity of vegetable oil -- which is scarce -- is used for making soap. * It has a relatively weak cleansing action. * It is less soluble in water than detergents. * Continuous use of soap makes your skin rough and dry.

* Can be used even with hard water for washing clothes. * Helps us to save vegetable oils for human consumption. * It has a stronger cleansing action than soap. * It is more soluble in water than soap. == == * It is not biodegradable. This means it is not decomposed by microorganisms. * They cause water pollution in air.

To clean a coin, you can use a mild dish soap and water to gently scrub it with a soft-bristled toothbrush. Avoid harsh chemicals and abrasive materials, as they can damage the coin's surface and reduce its value. If in doubt, it's best to consult a professional coin dealer or conservator for advice on the best cleaning methods for your specific coin.

http://www.answers.com/topic/mercaptan?cat=health The website above will give you more information than you probably wanted about the chemical composition of mercaptan. What you already know is that mercaptan is added to natural gas (odorless) to provide valuable odor detection for dangerous leaks. This doesn't answer your question; however, it does provide an important clue: mercaptan is also one of the odors associated with decay. Given that the odor has increased since the heat has been on, I suspect that what you smell is a dead varmint. If the smell grows rapidly worse, then begins to taper off, it would seem to confirm this theory. A dead mouse in a Chicago winter will only smell for about four days. Unless you can find the corpse, you may just have to live with it for a little while. Any longer than a week, and I would call CSI.

A foam carpet cleaner works by creating dry foam through the use of an air compressor. The dry foam is applied to the carpet which is then agitated using a cylindrical brush that revolves and combs through the carpet.

Soap is effective in removing semen from hands because it helps break down the proteins in semen, making it easier to wash away. However, it is important to thoroughly wash your hands with soap and warm water for at least 20 seconds to ensure all traces of semen are removed.

Excessive use of fabric softener can leave a residue on clothing, making the fabric less breathable and more prone to trapping dirt and odors. However, when used as directed, fabric softener typically does not significantly weaken clothing fibers.