What is the right cc's for a new ATV rider?
3-12 years old=49-150cc 13-16=150-300cc 16+=what ever cc.
Where can cheap atvs be purchased?
Cheap ATVs can be purchased from the ATV Trader Online website. The website has a large variety of ATVs for sale that are sold at very reasonable prices.
How fast does a four wheelers go?
Depends of the landform, how it is built, or the weight.
well it really depends on the 4 wheller not just the built or the weight of the wheller
How much does a good used four wheeler cost?
It depends on what a person is looking for as to the price of a four-wheeler. If looking for a new quad, a person can plan on spending a minimum of around $6,000 and upwards of $10,000.
However, and this is my opinion, deals can be found on used quads because of the fact that many facets of the economy are still struggling. In the last couple of years, my wife and I have purchased two used four-wheelers. The first was two years ago we bought a 2000 Kawasaki Prairie for $2500. The Kawasaki is a little rough around the edges and certainly won't win any beauty contests but it runs great and has not given us any problems. Recently, we purchased a 2005 Polaris Sportsman for $3500; it is in much better shape and should give us a good ride for many years to come.
So to answer your question, a person can probably find a quad to fit most any budget with quads costing from $2500 to $10,000.
Free 2004 polaris 600 twin sportsman ATV repair manual?
I have no manual for my 600, there is a wrench blinking when I first start it up, what does this mean? I have checked all fluids and everything is fine and runs great. just not sure about the blinking wrench in instrument panel.
"It should have been distilled water and sulfuric acid. You use electrolyte fluid for metal plating"
Actually Jason, battery acid IS an electrolyte. As for the original question, I assume you used the electrolyte that was supplied with the battery. If you still have the instructions that come with the battery, you might note that they say to fill to the "Low" mark, then charge the battery for the specified time. After this is complete, the cells can be topped-off to the "Full" mark.
Keep in mind that as lead-acid batteries are being charged, they emit hydrogen and oxygen gas. Since the bubbles can and do get trapped in the glass separating mats, the fluid level goes up during charging, then will drop back down once the bubbles escape.
For future reference, one of the latest additions to our sport is the "AGM" (Absorbed Glass Mat) battery. There's no loose electrolyte sloshing around inside, which means that they don't care what position they're mounted in. Also, they're completely sealed. Since most small batteries don't last more than two to three years, it's something to keep in mind for next time. Nathan
Where is the model number on your 05 grizzly?
If it is a standard 660 - YFM66FAT
HUNTER EDITION 660 - YFM66FAHT
WETLAND HUNTER 660-YFM66FAHWT
What is the year an model of your roketa vin 1zanhugc5s013335?
8th digit from the end tells you, same as an auto. Being a 5, that means it's a 2005.
What kind of oil and how much does a 1999 Yahamaha Big Bear 350 take?
Yamalube 20w50 is a good choice & it holds 3L for the Yamaha big bear 350.
Where do you find the vin number on a Honda rancher ATV?
it's on a plate behind the front brush guard
Why do some Portuguese motorcycles have yellow registration plates?
Portuguese governement make difference between motorcycles. A motorcycle with less than a 50cc and 8hp engine have a yellow plate are named of "motorizadas", more than 50cc and 8hp have a white plate, named "motociclos"
Atv firing and getting gas but won't crank?
If an engine won't crank, it is a battery, starter, solenoid or wiring problem. Cranking means "engine turning over". If you mean that it cranks/turns over but won't start, then that is a different problem.
An engine needs air, compression, good fuel and good spark to run. It could be something simple like bad fuel or weak spark. It could be that the spark timing is off. It could also be low compression. (A worn cylinder or valves that are adjusted too tight or open/off their seats) It could be getting too much fuel or not enough fuel.
You haven't really given enough information to be more specific.
How do you tighten on a zongshen 150cc 4-wheeler chain?
ive been having the same problem with mine.... but there is 2 pins that stick out on the left and the right of the chain you should be able to tighten them..... if not just weld it on there like i did after you do that it should go fine