answersLogoWhite

0

Car Stereos and Speakers

Car stereos and speakers are audio and video system designed for automobiles. They are commonly composed of two speakers and a stereo system but are also expandable depending on the user’s preference or needs.

3,598 Questions

What are the parts of a stereo?

A stereo system typically consists of several key components: a receiver or amplifier, which powers the system and processes audio signals; speakers, which convert electrical signals into sound; a source device, such as a CD player, turntable, or streaming device, that provides the audio content; and sometimes additional components like a subwoofer for enhanced bass or a tuner for radio reception. Together, these parts work to deliver high-quality sound for music and other audio media.

Does a car stereo amplifier take up one of the input jacks from the CD deck?

Yes, a car stereo amplifier typically requires a connection to the head unit (CD deck) using one of its output jacks. This connection allows the amplifier to receive audio signals from the head unit, which it then amplifies for the speakers. It's important to ensure the amplifier is compatible with the head unit and that the correct RCA output jacks are used if applicable.

Can you fix flutter in a sub woofer?

Yes, flutter in a subwoofer can often be addressed by checking and adjusting several factors. First, inspect the speaker cone and surround for any damage or wear that could cause distortion; replacing these components might be necessary. Additionally, ensure that the enclosure is properly sealed and that the internal dampening materials are adequate to minimize unwanted resonance. If the problem persists, consider consulting a professional for a more thorough diagnosis and repair.

What is electricl wiring color coding in nz?

In New Zealand, electrical wiring color coding follows specific standards to ensure safety and consistency. The typical color codes for electrical wiring are: brown for active (live), blue for neutral, and green/yellow for earth (ground). Additionally, for three-phase systems, the colors are brown, black, and grey for the active wires. It's important for electricians and DIY enthusiasts to adhere to these codes to prevent electrical hazards.

What is dad stereo input?

"Dad stereo input" often refers to the way fathers engage or contribute to conversations, especially in a humorous or lighthearted context. It can describe a tendency for dads to offer advice or commentary that may seem outdated or overly practical, using analogies or references that resonate with their own experiences. The term is sometimes used in a playful manner to highlight the generational gap in communication styles.

What would be a good plastic to make speakers out of?

A good plastic for making speakers is polypropylene, as it offers excellent sound quality due to its low density and good damping properties, which minimize unwanted vibrations. Additionally, polycarbonate is another suitable option, known for its durability and impact resistance. Both materials can be molded into complex shapes, allowing for innovative speaker designs while maintaining acoustic performance.

Wiring diagram for 1995 integra?

For a wiring diagram of a 1995 Acura Integra, you can refer to the vehicle's service manual, which contains detailed electrical schematics for various systems, including the engine, lighting, and audio. Additionally, online automotive forums and websites often provide PDF versions of these diagrams. Always ensure you are looking at the correct diagram for your specific model and trim level to avoid confusion. If you're not experienced with automotive wiring, consider consulting a professional to assist with any repairs or modifications.

What is the wiring diagram for a 1997 Mitsubishi eclipse gs?

The wiring diagram for a 1997 Mitsubishi Eclipse GS can typically be found in the vehicle's service manual, which provides detailed schematics for the electrical system, including connections for the engine, lighting, and other components. You may also find wiring diagrams online through automotive repair websites or forums dedicated to Mitsubishi vehicles. It's important to ensure you have the correct diagram for your specific model and engine type. For detailed troubleshooting, consulting the service manual or a professional mechanic is recommended.

Why do my 306 speakers not working after plugging in new stereo?

If your 306 speakers aren't working after plugging in a new stereo, check the connections to ensure they are securely plugged into both the stereo and the power source. Verify that the new stereo is properly configured and set to the correct input source. Additionally, check if the stereo's volume is turned up and if any mute settings are enabled. Lastly, inspect the speakers for any damage or blown fuses.

Can you use a 5800 watt amplifier with 2 12 inch 1400 watt woofers?

Yes, you can use a 5800-watt amplifier with two 12-inch 1400-watt woofers, but it's important to match the amplifier's output to the speakers' power handling to avoid damage. If the amplifier's power significantly exceeds the woofers' ratings, you may need to be cautious with volume levels to prevent overpowering the woofers. Additionally, ensure that the impedance of the woofers matches the amplifier's output specifications for optimal performance.

How do you access front speakers in an olds cutlass ciera 1989?

To access the front speakers in a 1989 Oldsmobile Cutlass Ciera, first, remove the door panels by unscrewing any visible screws and gently prying off the panel to detach it from the clips. Once the panel is off, you’ll see the speaker mounted in the door. Disconnect the wiring harness from the speaker, and then unscrew it from its bracket to remove it. Reassemble in reverse order after replacing or inspecting the speakers.

What is a good aftermarket amp to replace the amp of a 2004 infiniti g35?

A good aftermarket amplifier to replace the stock amp in a 2004 Infiniti G35 is the Alpine KTP-445U, which is a compact, high-quality option that provides a significant power boost while maintaining sound clarity. Another excellent choice is the Rockford Fosgate R500X1D, known for its reliability and impressive performance in bass response. Both options will enhance your audio experience without requiring extensive modifications to the vehicle's wiring.

What color wire is memory for a pioneer CD car stereo?

For a Pioneer CD car stereo, the memory wire is typically yellow. This wire is used to maintain the stereo's settings and stored information, such as radio presets, even when the ignition is turned off. It's important to connect it to a constant power source to ensure the memory functions correctly. Always refer to the specific manual for your model for accurate wiring information.

How many watts is your kicker subwoofer?

The wattage of a Kicker subwoofer can vary depending on the specific model. Typically, Kicker subwoofers range from around 300 watts RMS for smaller models to over 1,500 watts RMS for larger, more powerful ones. To get the exact wattage for a specific model, it's best to check the manufacturer's specifications or the product packaging.

Where is the reset button for the 2005 Solara 6 disc changer?

The reset button for the 2005 Toyota Solara's 6-disc CD changer is typically located on the front panel of the unit. You may need to remove the faceplate to access it, as it can be a small pinhole button. If you can't locate it, check the vehicle's owner’s manual for specific instructions. Always ensure the vehicle is turned off before attempting to reset the unit.

Bypassing the ebrake on avh-p5100dvd?

Bypassing the e-brake on the AVH-P5100DVD typically involves connecting the brake wire to a constant ground or power source to bypass the safety feature that prevents video playback while driving. However, it's important to note that doing so may be illegal in some areas and can pose safety risks. Always consult your vehicle's manual and local laws before making modifications to your car's audio system. Proceed with caution and consider the potential consequences.

Wiring diagram for 1988 Mercedes 190e?

To obtain a wiring diagram for a 1988 Mercedes 190E, you can refer to the vehicle’s service manual or repair guides, which often include detailed wiring diagrams. Additionally, online automotive forums and websites specializing in classic Mercedes vehicles may provide downloadable diagrams. It's essential to ensure that the source is reliable to guarantee accuracy for troubleshooting or repairs. If needed, consulting a professional mechanic familiar with vintage Mercedes models could also be beneficial.

What size are the door speakers?

The size of door speakers can vary widely depending on the make and model of the vehicle. Common sizes include 6.5 inches, 6x9 inches, and 5.25 inches, but some vehicles may have custom sizes. It's best to check the vehicle's specifications or consult the manufacturer for the exact size of the door speakers.

When installing a new radio in a 87 Jeep Comanche what does each wire represent?

When installing a new radio in an '87 Jeep Comanche, the wires typically represent the following functions: the power wire (usually red) connects to the ignition or battery for power; the ground wire (usually black) connects to the vehicle's chassis to complete the circuit; the speaker wires (various colors) connect to the speakers, with specific colors indicating positive and negative terminals; and the antenna wire (often blue or a similar color) connects to the antenna for radio reception. Always refer to a wiring diagram specific to your vehicle for accurate connections.

Can you run a channel amp with sub and two x?

Yes, you can run a channel amplifier with a subwoofer and two additional speakers, often referred to as "X" in audio setups. You'll need to ensure that the amplifier has enough power and channels to support all connected speakers, as well as appropriate impedance matching. Additionally, use a crossover to direct low frequencies to the subwoofer and higher frequencies to the other speakers for optimal performance. Proper wiring and configuration are essential for achieving the best sound quality.

What is the wiring diagram for pioneer dev-150mp?

The wiring diagram for the Pioneer DEH-150MP typically includes connections for power, ground, speaker outputs, and antenna. The main power wire is usually red, the ground wire is black, and speaker wires are color-coded (e.g., white for the front left, gray for the front right, etc.). For specific wiring details and color codes, it's best to refer to the owner's manual or a dedicated wiring diagram resource for accuracy. Always ensure connections are made safely to avoid short circuits or damage.

Why do your env2 speakers work and then dont work?

The intermittent functionality of your Env2 speakers could be due to a variety of issues, such as loose connections, a malfunctioning audio source, or problems with the speakers themselves. Check the wiring and connections to ensure they are secure and free from damage. Additionally, test the speakers with a different audio source to rule out any issues with your current device. If the problem persists, the speakers may require servicing or replacement.

Whatmach is the best replacement bass speaker for a 460 stereo?

The best replacement bass speaker for a 460 stereo would typically be a high-quality 10-inch or 12-inch subwoofer that matches the power handling and impedance of the original speaker. Brands like JL Audio, Kicker, or Rockford Fosgate are popular choices known for their performance and durability. It's essential to consider the enclosure type and ensure that the new speaker fits well in your existing setup for optimal sound quality. Always check compatibility with your stereo's specifications before making a purchase.

Where can you get a new wiring harness for the clarion pn-9945m cassette player?

You can find a new wiring harness for the Clarion PN-9945M cassette player from various online retailers such as Amazon, eBay, or specialized car audio parts websites. Additionally, checking with local electronics shops or car audio installation services might yield results. If you prefer OEM parts, contacting Clarion directly or searching their official website could also be beneficial.

Need the wiring diagram for pioneer DEH-3900MP?

You can find the wiring diagram for the Pioneer DEH-3900MP by checking the user manual, which is often available on Pioneer’s official website or through online forums. Additionally, car audio installation websites may provide downloadable diagrams. If you need a specific connection layout, consider searching for community forums or YouTube videos that demonstrate the installation process.