Die-cast Toys

The value of a 1979 Dale Earnhardt Rookie year NASCAR card can vary significantly based on its condition, rarity, and demand among collectors. Typically, prices can range from a few hundred to several thousand dollars. A well-maintained card in mint condition could fetch higher prices, especially at auction. For the most accurate valuation, it’s best to consult recent sales or auction results for similar items.

The value of an autographed Tommy Houston Suburban Propane diecast can vary based on factors such as condition, rarity, and market demand. Typically, such collectibles can range from $20 to $100, but prices may fluctuate based on recent sales or auction results. Checking recent listings on auction sites or collectible forums can provide a more accurate estimate.

Hot Wheels is a brand of die cast toy car, introduced by American toymaker Mattel in 1968. It was the primary competitor of Johnny Lightning and Matchbox until 1996, when Mattel acquired rights to the Matchbox brand from Tyco. The original, and now famous, Hot Wheels logo was designed by California artist Rick Irons, who at that time worked for Mattel. Before Hot Wheels, the huge market for small car models was dominated at that time by the British company Lesney with their Matchbox cars. Elliot Handler, co-founder of Mattel, decided to produce a line of die-cast toy cars for boys. Although his executives thought it was a bad idea, he was able to capture much of this market by introducing a number of revolutionary features, including low-friction wheels suitable for racing on a track, and styling in tune with the times of customized, racing and show cars coming out of places like California. There were sixteen castings released in 1968, eleven of them designed by Harry Bentley Bradley, with the first one produced being a dark blue Custom Camaro. Although Bradley was from the car industry, he had not designed the full-functioning versions of the real cars, except the Dodge Deora concept car, which had been built by Mike and Larry Alexander. Another of his notable designs was the Custom Fleetside, which was based on his own heavily-customized '64 El Camino. * Beatnik Bandit (designed by Ed "Big Daddy" Roth) * Custom Barracuda * Custom Camaro * Custom Corvette * Custom Cougar * Custom Eldorado * Custom Firebird * Custom Fleetside * Custom Mustang * Custom T-Bird * Custom Volkswagen (designed by Ira Gilford) * Deora (based upon a real custom surf-truck designed by Harry Bradley for Dodge) * Ford J-Car (based on the real race car that became the Ford GT40 Mk IV) * Hot Heap (based upon the Model T roadster known as "Tognotti's T") * Python (designed by Dean Jeffries, based on Bill Cushenbery's "Cheetah" show car) * Silhouette (based upon Bill Cushenbery's custom car)

Of the first 16 cars (sometimes called the "Sweet 16" by collectors), 9 were based upon customized versions of regular production automobiles of the era, and 7 were based upon real show cars and cars designed and built for track racing. All of the cars featured 'Spectraflame' paintwork, bearings, redline wheels, and working suspension. There was one notable difference in the first run production cars and that was a lack of "Door Cuts" in the molded cars. This was thought to be more accurate to the scale as door openings would be nearly invisible at that scale. Also, the sharp edges of the cuts in the molds would quickly wear away from the process of injection. Later they were brought back due to public opinion and toy testing on children. The metallic 'Spectraflame' paintwork also marked out these models from drab enamel of Matchbox cars. The attractive finishes were achieved by firstly polishing the bare metal of the bodyshells and then coating them in a clear colored lacquer, and featured such exotic colors as 'Antifreeze', 'Magenta' and 'Hot Pink'. Because 'Hot Pink' was considered a "girls color", it was not used very much on Hot Wheels cars. For most castings, it is the hardest color to find, and today can command prices ten times as high as more common colors. In order for the cars to go fast on the plastic track, Mattel chose a cheap, durable, low-friction plastic called Delrin to use as a white bushing between the axle and wheel. The result was cars that could go up to scale 200 mph. The bushings were phased out in 1970, and replaced with flush black inner wheels with outer caps. The early years of Hot Wheels are known as the Redline Era as until 1977 the wheels had a red line etched around the tire rim, popular on muscle cars at the time. The "Torsion Bar" suspension was simple, but flawed. Inside the car, the axles followed a "C"-like shape that was connected to the chassis. When pushed down, the axles would bend like a real car. However the axles were hard to install on the chassis while being assembled and would become detached from the lugs on the baseplate if very hard pressure was applied. Well played with cars would develop an obvious "sag" to the wheels. The suspension was redesigned in 1970 with solid axles mounted on a bar of plastic acting as a spring. Packaged along with the cars were metal badges showing an image of the car so fellow collectors could identify each other and compare collections. Most importantly, there were designed to run on orange plastic track, which could be placed to make interesting jumps and loops. Motive power was by means of gravity, by attaching the starting point of a course to a table or chair via an included C clamp. A two-lane starting gate was available, allowing two lengths of track to be set up for racing. Later sets had both the starting gate and a finishing flag which would be tripped by the first car. One of the most famous sets was the 1970 Mongoose & Snake Drag Race Set, which reached values as high as $500 during the 1990s, but has since been produced in modified replica form. It featured yellow Plymouth Barracuda and red Plymouth Duster funny cars, loops, jumps, and even an apparatus that would deploy drag chutes after they crossed the finish line, all in a box showing Don Prudhomme and Tom McEwen. Other sets included a Supercharger that had an electric motor and foam covered wheels that propelled the car around a loop of track as the cars passed through. Accessories included a lap counter and a speedometer. It was the combination of all of these ingredients - speed via the low-friction wheel/axle assembly and racing tires, looks due to Spectraflame paint and mag wheels, plus the inclusion of very American themes such as hot-rod designs based on true American prototypes not seen in great numbers in the competition's product lines - that laid the groundwork for the incredible success story Hot Wheels were to become. As it turned out, the Hot Wheels brand was a staggering success. (This accomplishment must be put in its historical perspective: Basically, the series "re-wrote the book" for small die-cast car models from 1968 onwards, forcing the competition at Matchbox and elsewhere to completely rethink their concepts, and to scamper to try to recover lost ground.) Harry Bentley Bradley did not think that would be the case and had quit Mattel to go back to the car industry. When the company asked him back, he recommended a good friend, Ira Gilford. Gilford, who had just left Chrysler, quickly accepted the job of designing the next Hot Wheels models. Some of Hot Wheels' greatest cars, such as the Twin Mill and Splittin' Image, came from Ira Gilford's drawing board. The success of the 1968 line was solidified and consolidated with the 1969 releases, with which Hot Wheels effectively established itself as the most important brand of small toy car models in the USA. == * Brabham Repco F1 * Chaparral 2G * Classic '31 Ford Woody * Classic '32 Ford Vicky * Classic '36 Ford Coupe * Classic '57 Bird * Custom Charger * Custom AMX * Custom Continental * Custom Police Cruiser * Custom Fire Engine * Ford MK IV * Indy Eagle * Lola GT70 * Lotus Turbine * Maserati Mistral * McLaren M6A * Mercedes-Benz 280SL * Rolls-Royce Silver Shadow * Shelby Turbine * Splittin' Image * Torero * Turbo fire * Twin Mill * Volkswagen Beach Bomb The Splittin' Image, Torero, Turbofire, and Twin Mill were part of the "Show & Go" series and are the very first original in-house designs by Hot Wheels. The initial prototypes of the Beach Bomb were faithful to a real VW Bus's shape, and had two surfboards sticking out the back window. During the fledgling Hot Wheels era, Mattel wanted to make sure that each of the cars could be used with any of the play sets and stunt track sets. Unfortunately, testing showed that this early version (now known as Rear-Loader Beach Bomb, or RLBB) was too narrow to roll effectively on Hot Wheels track or be powered by the Super Charger, and was too top-heavy to negotiate high-speed corners. Hot Wheels Designers Howard Rees and Larry Wood modified the casting, extending the side fenders to accommodate the track width, as well as providing a new place on the vehicle to store each of the plastic surfboards. The roof was also cut away and replaced by a full-length sunroof, to lower the center of gravity. Nicknamed "Side-loader" by collectors, this was the production version of the Beach Bomb. The Rear-Loader Beach Bomb is widely considered the "Holy Grail" of any Hot Wheels collection. An unknown number were made as test subjects and given to Mattel employees, and today there are only about 25 known to exist. A regular production Beach Bomb may be worth up to $600, depending on condition. Market prices on RLBBs however, have easily reached the five-figure plateau. Within the last decade, one of two existing hot pink RLBBs sold for reportedly above $70,000 to a well-respected and widely known Hot Wheels collector. The Peterson Automotive Museum in Los Angeles had a pink RLBB in its Hot Wheels exhibit. It was displayed on a single rotating platform, much like the kind used to showcase precious gems. The Hot Wheels Collectors Club released a new, updated version of the rear loading Beach Bomb in 2002 as a limited edition. 1970 was another great year for Hot Wheels. This was also the year that Sizzlers appeared. Howard Rees, who worked with Ira Gilford, was tired of designing cars. He wanted to work on the Major Matt Mason action figure toy line-up. Rees had a good friend by the name of Larry Wood. They had worked together at Ford designing cars. When Wood found out about Hot Wheels at a party Rees was holding, Rees offered Wood the job of designing Hot Wheels. Wood agreed, and by the end of the week, Larry Wood was working at Mattel. His first design would be the Tri-Baby. After 36 years, Larry still works for Hot Wheels. Another designer, Paul Tam, joined Larry and Ira. Paul's first design for Hot Wheels was the Whip Creamer. Tam continued to work for Mattel until 1973. Among the many futuristic designs Tam thought up for Hot Wheels, some of the collector's favorites include Evil Weevil (a Volkswagen with two engines), Open Fire (an AMC Gremlin with six wheels), Six Shooter (another six wheeled car), and the rare Double Header (co-designed with Larry Wood). 1972 and 1973 marked a slump for Hot Wheels; few new castings were produced, and in 1973 most cars changed from Mattel's in house "Spectraflame™" colors to less-shiny solid enamel colors, which mainline Hot Wheels cars still use today. Due to low sales, and the fact that many of the castings were not re-used in later years, the 1972-3 models are known to be very collectible. In 1974, Hot Wheels began using the slogan "Flying Colors", and added flashy decals and tampo-printed paint designs, which helped revitalize sales. As with the low-friction wheels in 1968, this innovation was revolutionary in the industry, and - although far less effective in terms of sales impact than in 1968 - was copied by the competition, who did not want to be outmaneuvered again by Mattel product strategists. In 1977, the Redline Wheel was phased out, with the red lines being erased from the wheels. This cut costs, but also reflected that the red lines popularized during the era of muscle cars and Polyglas tires were no longer current. read the rest at http://en.wikipedia.org/wiki/Hot_Wheels

Yes, a misprint like "le ca" instead of "le car" on a MATCHBOX blister pack can increase its perceived value among collectors. Such errors are often viewed as rare or unique, making them more desirable. Collectors typically seek out items that stand out due to manufacturing mistakes, which can elevate the item’s market price. However, the extent of the increase in value may vary depending on the specific collector interest and demand for that particular misprint.

Without it being counter fit, 900g. The g-power above 900 are fake, except for a darkus tigrara, 950g, extra extra extra extra raaaaaaaaaaaaaaaaaaaaaaaaaaaare!!!!!!!!!!!!!!

if your bakugans g-power is over 950 is isn't faaaaaaaaaaaaaaake!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

if it's the older model: 14.4v

newer model: 16.8v

it depends there condition and what car are they

Here is the movie, have you watched toy story. Of course, the movie is just make believe.

If it is original from the 1960's and early 1970's in an unopened box it could bring thousands of dollars. Boxes were stamped with names of the cars inside and that would effect the value, too. If it's from the 1990's to present you would be lucky to get the retail value of about $1 per car.

clones have no difference really they just look a little bit different nothing that actually matters

As of November 2010, online auction prices range from $3.23 to $9.99, depending on condition and whether the box is with the model. This model was made in large quantities and is not a hot commodity at the moment.

a furby baby acts more like a baby

no not all i have one that is a new one that has a metal under carriage well its not mine its my brothers