0
Dodge Sprinter Van
The Dodge Sprinter Van was manufactured by Mercedes-Benz. It was produced in 1995 for distribution in the US and Canada as a transport vehicle. Its 3.0 liter turbo diesel engine was ideal for the needs of parcel delivery companies.
434 Questions
How do you remove the side door mirror on a sprinter?
Remove 3 torque screws on inside of door. On newer models, and perhaps on yours, there is a hanger clip that prevents the mirror from falling (A nice feature). Remove both ends of electronic tube. Un-clip wire leading to mirror. Carefully pull through tube. Lift mirror to remove. :) Careful...don't scratch the paint!
How do you add Power steering fluid in a 2007 dodge sprinter?
You remove the cap on the power steering reservoir, and pour fluid in until it is at the full mark.
Will non synthetic oil damage a engine that needs fully synthetic oil?
Yes, although don't expect damage to be immediate. Petroleum oil is refined and synthetic oil is engineered. The difference being the molecular structure is unstable and varies in petroleum oils. Synthetic oil has a more stable molecular structure that is less susceptible to shear stresses. I use Amsoil in particular, because it outperforms all other synthetics, but ANY synthetic is better than conventional. If your mfr requires synthetic, for sure do not compromise!
What is the correct transmission fluid level in a 2006 dodge sprinter van?
The correct fluid level is determined with the use of the dealers scan tool and the dipstick ( which is a special tool ). The scan tool is required to know internal trans temperature, That is compared to a chart and the correct fluid height can then be measured.
Where is the oil filter in the 2008 dodge sprinter?
Driver side front of the engine, you have to unscrew a large black plastic part to remove the filter element.
How do you reset maintenance due reminder in a 2007-2009 Dodge Sprinter?
Service Reset instruction for 2007+ Sprinter with no steering wheel buttons.
1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the "O" button down till you hear a beep (could take a while, 30 sec.)
3. Press the "M" button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select "reset 51"
4. Now, when appropriate oil type is selected press "O" for 6 seconds until ''2'' is displayed.
5. Press "O" once again briefly and the '' reset done'' message will confirm that the job is done.
6. Pull the Key out
How do you jump start a 2009 dodge sprinter?
You clip the red lead to the post under the red sliding cap that is on the side of the air cleaner, and the black to the stud on the left inner fender.
You clip the red lead to the post under the red sliding cap that is on the side of the air cleaner, and the black to the stud on the left inner fender.
Where is the fuse for the blower on a Dodge Sprinter?
side panel on driver seat or under steering wheel just above the leg or knee
How do you fix p0671 p0380 codes on a 2006 dodge sprinter?
You have a problem in the glow plug system. You will need to test for a shorted glow plug by making a test harness with a 15 amp fuse in it and applying 12 volts to each glow plug to see which blows the fuse. You will also have to replace the glow plug module/relay which is loacted under the battery shelf under the hood. Be very careful when trying to remove the glow plugs. Only attempt with a fully warm engine ( drive it for 30 minutes first ). Do not try to force them to turn, they will break.
You have a problem in the glow plug system. You will need to test for a shorted glow plug by making a test harness with a 15 amp fuse in it and applying 12 volts to each glow plug to see which blows the fuse. You will also have to replace the glow plug module/relay which is loacted under the battery shelf under the hood. Be very careful when trying to remove the glow plugs. Only attempt with a fully warm engine ( drive it for 30 minutes first ). Do not try to force them to turn, they will break.
What kind of power steering fluid is used for a 2005 Sprinter?
The power steering system uses automatic transmission fluid.
When did the Dodge Sprinter van first enter production?
The Dodge Sprinter van first entered production in 2003. It has continuously been produced from 2003 to 2009. Production of the Dodge Sprinter has seized as of 2009.
How do you remove a safety partition in dodge sprinter van?
It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.
It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.
What oil should I for diesel 2007 dodge sprinter van?
It requires a 5w30 or 5w40 full synthetic diesel engine oil. The brand is not important.
Is there any kind of battery located under a seat somewhere in the 2007 dodge sprinter?
No. it is under the floor where the drivers feet rest.
Where is the fuel filter location 2005 dodge sprinter?
Driver side of the block, about middle up and down, and front to back.
How do you remove door panels on 2005 dodge sprinter van?
i dont know if i used this befor.. wont let me in
How do you remove the turbo on a 2007 dodge sprinter van?
1.Disconnect negative battery cable.2.Remove the engine trim cover.3.Remove air intake tube (air cleaner to turbo) (1).4.Remove engine cover front bracket (2).5.Remove air tube (turbo to cooler) (3).6.Remove the turbo heat shield (4). Remove the elbow to converter exhaust clamp (1). 8.Remove the turbo front bracket retaining bolts (1).9.Raise vehicle, remove front splash shield.10.Drain cooling system.11.Disconnect the downstream catalytic converter at the extension pipe.12.Disconnect the extension pipe to muffler.13.Disconnect O2 sensor wire connector.14.Reposition extension pipe and catalytic converter.15.Lower vehicle and disconnect catalytic converter to downstream catalytic converter clamp.16.Remove upstream catalytic converter.17.Disconnect transmission fill tube and trim cover bracket and set aside. 18.Disconnect exhaust elbow at turbo (2).19.Disconnect EGR tube at manifold to left cylinder head (3).20.Remove left and right exhaust manifold retaining bolts and gaskets (4). 21.Remove front turbo retaining bolts (1).22.Remove turbo mount retaining bolts.23.Remove turbo.
Where is the starting battery located on a 2007 Dodge Sprinter Diesel Motorhome?
Under the driver side floor board.
