Flooring

Do you need a handyman license in the state of Washington?

of course

Not always. For some specific renovation needs license necessary.

There is the perfect reason to call a handyman service rather than individuals to fix each problem as it occurs. These repairs are a bit borderline - you may need to consult with a plumber for the air conditioning or the hot water heater, but the beauty of a handyman service is that most states allow anyone with the knowledge to do it, to work on these items

source: http://blogs.hire-a-contractor-now.com/2009/11/local-handyman/

I would not consider hiring any handyman unless he was licensed, bonded and insured. In Maryland, the entity that licenses handymen is the Maryland Home Improvement Commission. In addition to the bonding and liability insurance the handyman should carry, the MHIC charges licensed members fees which provide additional insurance to homeowners.

For plumbing and electrical job, a General Contractor's license is acceptable for what is called "light plumbing" or "light electrical." Generally this includes installing fixtures or simple repairs, but does not include opening walls, running new pipes or putting in breakers or bringing power into the box.

Yes

Be sure the hole are free of contamination, oils, and dust. The affected area is best to be a rough texture to allow for bonding. Patch the affected area with a stainable polymer modified patching material or you can use gray portland cement with some sand aggregate. If using the polymer patch option, be sure to apply TWO coats (one filler and one finish). If you decide to use the portland mix, scrub some re-emulsifiable bonding agent into the hole before you fill in the patch, allowing it to dry ONCE.Be sure the patch is completely dry and cured before you stain otherwise the patch may turn out darker than the rest of the floor.

These are Ceramic tiles enfused with silica sand (The sand used to make glass).

25ft

The area of the table is Pi/4 x D2 = Pi/4 x 252 = 490.8739 square feet.

You will need in excess of that to be able to trim the round edges.

at least 650 tiles with increments of 25 depending on how long a rectangle.

YOu would not want to paint a linoleum floor, the paing is simply going to scratch off, probably within a year. Other than commercial grade flooring coatings (for garages, workspaces etc) you would never find a painted vinyl like surface in a home.

1 yard = 3 ft
7 yards = (7 x 3) = 21 ft

12 inches = 1 ft
144 inches = (144 / 12) = 12 ft

The area of the floor is (21 x 12) = 252 square feet.

For the sake of brevity and simplicity, we'll assume that you don't intend to
carpet the walls or ceiling of the room, and we'll leave the answer right there.

It will cost 200.00

65 1/2 pieces

1 yard = 3 foot

so 16 foot by 18 foot = 51/3 x 6 yard carpet

51/3 x 6 = 32 square yards of carpet.

At 0.65 per square yard this is 0.65 x 20.80 per square yard.

assuming that's 12feet x 12feet, 16 square yards.

A 12 by 15 room: 12 x 15 = 180

180 divided by 9 = 20

(one yard is 9 square feet)

So, depending on the room, you might need 20 to 21 yards of carpet for a 12 by 15 room.

John

12 ft * 16 ft = 192 sq ft. There are 9 sq ft in a sq yd so 192/9 = 21.333 sq yds.

12 in = 1 ft

Area of the room is 9 x 1 = 9 square feet.

Cost of carpet is 9 x 60 = 540 .

144

Pull the toilet. Check the closet flange. If it is not loose or broken, replace the wax ring and closet bolts. Reset toilet. Level with wobble wedges. Caulk base of toilet.

4 1/3 squared is ..

about 19 square yards

$2,190. You simply multiply the number of square yards by the cost per square yard. Pretty basic math. Hope this isn't homework for summer school.

In this problem, you basically find the area and then divide it by 16 by 16 in. tiles. But first make note that 64 is in square feet, not inches. So you now have to convert 64 ft2 into in2. Remember that there are 12 inches in a foot so there are 144 in2 in 1 ft2. So in this case, you multiply 64 by 144, to get 9216, or 9216 square inches. Now you need to find how many 16 by 16 in. tiles would fit into 768 sq. in. To do this, you first have to multiply 16 by 16 to get 256 sq. in. Finally, divide 9216 by 256 to get 36. The answer is that 36 16x16 in. tiles would cover 64 sq. ft.

I just used this site to stain my concrete patio for less than $5! http://www.stainedfloor.com/

To remove any previous coating material and to have fresh wood that is ready to absorb.

Sure, just leave a SMALL gap you can later silicone or shoe.

Carpet stains can be removed sevaeral ways. one way is using a stong solvent based spot remover such as Dissolve. They must be rinsed out with water, or carpet fibers will release.

If all else fails, a professional tec can cut the spot out and replace it with a piece from a closet.