What are the ingredients in Bounce dryer sheets?
Bounce contains a sticky chemical that is interpreted through touch as being soft. The chemical make up is guarded, however, it is flammable and has a low level of toxicity. A rat must only eat the amount chemical on 12 dryer sheets in order to die.
How many BTU per hour is a 1500 watt heater?
3 413 * 1.5 = 5 119.5 BTUs per hr for a 1500 Watt heater
what is the electric cost/
Why doesn't my freezer work after laying refrigerator on its side during a move?
Oil runs out of the compressor into the return and discharge lines. With the freezer upright, you should wait atleast three times the amount of time the freezer was turned on its side to allow the oil to migrate back into the compressor. Attempting to turn it on before then may draw the oil further into the lines and also cause the compressor to seize up. A freezer can be moved on its side as long as it is on the side opposite of the return and discharge lines. This is why some people have had no problems transporting a freezer on its side and they work right away. They got lucky due to a 50:50 chance. I know this stuff because I was one of the unlucky ones who did not know any of this and found out the hard way.
Why do your central heating radiators make so much noise when 1st turned on?
When central heating radiators make noise when first turned on, it is often due to air bubbles trapped in the system. As the hot water flows through the radiator, it displaces the air, creating a gurgling or banging sound. Bleeding the radiators to release the trapped air can help resolve the noise issue.
Size of breaker for 5.4 kilowatt stove?
The sizing of a breaker is based on the amperage that the device draws. To obtain the amperage from kilowatts a voltage must be stated. Amps = Watts/Volts.
The following values are based on the stove using a supply voltage of 240 volts. Amps = 5400/240 = 22.5 amps. The breaker required for this stove will have a 30 amp rating. The feeder supplying the voltage to the stove will be a #10 AWG.
Plastic is porous and can absorb and retain odor molecules in its structure. This makes it difficult to remove the smell completely, even with washing or cleaning. Over time, the odor can become more ingrained in the plastic, leading to persistent smells.
Will it save lots of money if you turn the refrigerator off when you leave your apt for the winter?
Yes, When you don't need to use your refrigerator for a long period of time, like through the winter it will definently save you money, cost wise on how much it will save you also depends on the type of unit, how old it is, and whether it's a power saver.
But if you decide to turn it off, do not leave it closed or it will grow mold and mildew.
Why is dryer not drying clothes?
The dryer is not working properly and should be fixed.
If the dryer is getting hot, but not drying the clothes you will need to clean the exhaust ductwork and exterior vent cap. It is probably clogged with lint. If the dryer is not getting hot you will need to call a repairman.
How long can you keep a lava lamp on for?
It is generally recommended to keep a lava lamp on for 6 to 8 hours at a time to prevent overheating. It is advisable to turn it off for a few hours before turning it back on to prevent any damage to the lamp or the liquid inside.
What is the mixing ratio for using denatured alcohol to remove water from k-1 kerosene?
I put one third of an 8" soda straw ( used as a dip tube) into 2 quarts of kerosene. be sure to use a clear straw so you can see how much you are putting in,,, you can also use an eye dropper if you want...Good Luck
Why does water heater pilot light go out when gas is turned on?
If the pilot light goes out when the gas is turned on, it could be due to a dirty or faulty thermocouple, a clogged pilot tube, or a problem with the gas supply. It's important to have a professional inspect and repair the water heater to ensure it is functioning safely and effectively.
Why is a white substance left on your clothes after washing them?
The white substance left on clothes after washing could be due to residue from laundry detergent or fabric softener that wasn't properly rinsed out. Using too much detergent or adding it incorrectly can also cause this issue. To prevent it, try using less detergent, avoiding overloading the washing machine, and ensuring proper rinsing during the wash cycle.
How do you operate a dishwashing machine?
Every dish washer operates differently. The dish washer should be loaded, have soap added in the appropriate labeled spots on the inside of the door, then press the buttons for the type of wash that is required.
No, the radiation from a microwave oven is not strong enough to affect the operation of a television placed on top of it. Microwaves are designed to contain the radiation within the oven's cooking chamber, and the exterior remains safe for objects like a television to be placed on top without interference.
Why does my Air conditioner starts by blowing cold air then warm air?
This could be due to a dirty air filter, low refrigerant levels, or a malfunctioning compressor. It's best to have a professional HVAC technician inspect and service your air conditioner to diagnose and fix the issue.
Descalers work by breaking down and removing limescale deposits from surfaces such as appliances, pipes, and fixtures. They often contain acidic compounds like citric acid or acetic acid that dissolve the mineral buildup, allowing it to be easily rinsed away. Regular use of descalers can help maintain the efficiency and longevity of household appliances.
Why were smoke detectors invented?
Smoke detectors were invented to provide early warning in case of a fire. They help to detect smoke and trigger an alarm to alert people in the vicinity to evacuate the building and seek safety. Smoke detectors have since become a crucial tool in fire safety, helping to save countless lives.
Why do the blobs of wax rise and fall in a lava lamp?
The blobs of wax in a lava lamp rise and fall because of differences in their densities. As the wax heats up, it becomes less dense and rises to the top. When it cools down, it becomes denser and sinks back down. This process creates the mesmerizing flowing effect in a lava lamp.
A gurgling sound and increased water production can indicate a clogged condensate line or drain issues in your central AC unit. This is not normal operation, even in hot temperatures. It's best to have a professional HVAC technician check and resolve the issue to prevent potential damage to the system.
The electrical Breaker will not reset?
To reset a breaker move the handle completely to the off position. If it had tripped you will feel a little resistance as it goes to the off position. If this doesn't restore the power the breaker is either bad and in need of replacement, or there is a persistent fault in the circuit causing the breaker to immediately re-trip. Breakers are safety devices.
How do you installing a ceiling fan on 14 foot ceilings?
Yes. Most ceiling fans have parts that let you either put the fan close to the ceiling (which is typical for an 8' ceiling) or let it hang down farther from the ceiling. All my ceilings are 8' and I have 4 ceiling fans in 4 different rooms and they work good by letting me reduce my AC usage, which is much more expensive.
Why is styrofoam cup a good insulator?
Styrofoam cups are good insulators because they are made of polystyrene, which has a low thermal conductivity. This means that heat transfer through the material is minimal, keeping the contents of the cup insulated from external temperature changes. The air pockets within the foam structure also contribute to its insulating properties.
Why is my prodigy washing machine making a grinding noise on the spin cycle?
This grinding noise could be due to a problem with the bearings or the drive belt in the machine. It is best to unplug the machine and check these components for any damage or wear. If the issue persists, it may be necessary to contact a professional for further inspection and repair.
Why do fluorescent light glow when turned off?
Fluorescent lights use electric current to excite mercury atoms, which emit UV light. The tube part of the light is covered in phosphorescent material, which is excited by the UV light the mercury produces, and emits visible light. The reason they glow is because it takes a while for an excited mercury atom to emit the UV light, and it takes even longer for the excited phosphorescent molecules to emit all of their excess energy and return to their normal energy levels, also called the ground state. The path of the energy is Electricity -> UV light-> Visible light-> your eye
How can I fix my Maytag Neptune washers problem with shaking and vibration?
Check that your washer is level on the floor, as uneven flooring can cause shaking. Make sure the load is balanced inside the drum and not overloaded. Also, check that the shipping bolts have been removed from the machine as they can cause excessive vibration.