Honda CRX

To fix a 1989 CRX hood that won't latch, first check for any obstructions or debris around the hood latch mechanism. Inspect the latch for rust or damage; if it's stuck, lubricate it with penetrating oil. If the latch is misaligned, adjust it by loosening the mounting bolts and repositioning it until it catches properly. Lastly, ensure the hood release cable is functioning correctly and not slack or broken.

To fix the seatbelt on a 1988 Honda hatchback that won't retract, first check for any obvious obstructions like dirt or debris in the retractor mechanism. If there are no visible issues, remove the seatbelt assembly by unscrewing the mounting bolts, then inspect the retractor for damage or stiffness. You can attempt to lubricate the retractor with a silicone spray, but if it remains unresponsive, consider replacing the seatbelt assembly entirely for safety. Always ensure that any repairs maintain the integrity of the seatbelt system.

For a 1989 Honda CRX hatchback with a 1.6-liter engine, the rocker arm torque specification is typically around 14 lb-ft (19 Nm). The recommended torque sequence involves tightening the bolts in a specific order, usually starting from the center and moving outward in a crisscross pattern to ensure even pressure distribution. Always refer to the vehicle's service manual for the exact sequence and specifications, as variations may occur based on engine type or modifications.

The Honda CRX typically weighs less than the Honda Civic EG hatchback. The CRX generally has a curb weight of around 2,200 pounds, while the EG hatchback usually weighs around 2,400 to 2,600 pounds, depending on the specific model and trim. Thus, the CRX is lighter than the EG hatch.

To replace the LED clock unit on a 2000 Honda CR-V, first, disconnect the vehicle's battery to ensure safety. Remove the dashboard trim surrounding the clock by gently prying it off with a trim removal tool. Next, unscrew the clock unit from its housing, disconnect the wiring harness, and replace it with the new unit. Finally, reassemble the dashboard trim and reconnect the battery.

To remove the serpentine belt cover on a 1986 Honda CRX Si, first ensure the engine is off and cool. Remove any obstructing components, such as the air intake duct or battery, if necessary for access. Then, locate and remove the bolts securing the cover, typically using a socket wrench. After removing the bolts, gently lift the cover off, taking care not to damage any surrounding components.

If your 1988 Honda CRX cranks but doesn't start, it could be due to several issues. First, check if there is fuel reaching the engine; a clogged fuel filter or a failing fuel pump may be the culprit. Additionally, inspect the ignition system, including the spark plugs and ignition coil, to ensure they are functioning properly. Lastly, verify that the battery and electrical connections are in good condition to rule out any power issues.

To adjust the clutch on a 1991 Honda CRX, locate the clutch cable adjustment at the firewall or near the clutch pedal. Loosen the lock nut and turn the adjustment nut to achieve the desired free play, typically around 0.5 to 1 inch at the pedal. After adjusting, tighten the lock nut securely and ensure the clutch engages and disengages smoothly without any slipping. Test the adjustment by pressing and releasing the clutch pedal before taking the vehicle for a drive.

Yes, you can adjust the choke on a Honda CRX 1.5 with dual carburetors. The choke adjustment typically involves setting the choke linkage or adjusting the choke plate position to ensure proper air-fuel mixture during cold starts. It's important to refer to the vehicle's service manual for specific procedures and specifications to ensure optimal performance. Proper adjustment can enhance starting and overall engine efficiency.

The engine oil capacity of a 1991 Honda CRX is approximately 4.1 quarts (or about 3.9 liters) when using a standard oil filter. If you're replacing the oil filter, it's advisable to check the owner's manual for the exact specifications, as there may be slight variations depending on the specific engine type (such as the 1.5L or 1.6L engines). Always check the dipstick after filling to ensure the correct level.

The RPM sensor on a Honda CRX with a D15B motor is typically located on the distributor. Specifically, it is part of the ignition system and is responsible for sending signals to the engine control unit (ECU) to monitor engine speed. In some setups, it might also be referred to as the crankshaft position sensor, which can be found near the crankshaft or timing belt area, depending on the model year and specific engine configuration. Always refer to a service manual for precise location details.

To adjust the timing on a 1987 Honda CRX Si, first ensure the engine is at operating temperature and then turn off the engine. Locate the timing adjustment connector (usually a two-pin connector) in the engine bay and short the terminals with a jumper wire. Start the engine and use a timing light to check the ignition timing against the specified timing mark on the crankshaft pulley. If adjustment is needed, loosen the distributor bolt and rotate the distributor until the timing light shows the correct timing, then tighten the bolt to secure the distributor in place.

To change the fuse for the windshield wipers on a 1987 Honda, first locate the fuse box, usually found under the dashboard on the driver's side or near the engine compartment. Use a fuse puller or pliers to remove the wiper fuse, which is typically labeled in the diagram on the fuse box cover. Inspect the fuse to see if it's blown; if so, replace it with a new fuse of the same amperage. Finally, reassemble the fuse box and test the wipers to ensure they are functioning properly.

Mobil 1 ATF is generally compatible with many automatic transmission fluids, but it's essential to check the specifications to ensure it meets Honda's requirements. Honda Genuine ATF is specifically formulated for Honda vehicles, so using it is usually recommended for optimal performance and protection. If you consider using Mobil 1 ATF, consult your vehicle's owner manual or a professional mechanic to ensure compatibility.

To replace the AC expansion valve on a 1990 Honda CRX, first ensure the system is decharged by a professional to remove refrigerant. Next, access the valve by removing the dashboard or components obstructing it, typically located near the evaporator. Disconnect the refrigerant lines and electrical connectors, then unbolt the old valve and replace it with the new one. Finally, reassemble everything, recharge the AC system, and check for proper operation.

The 1991 Honda CRX Si has a compact size, measuring approximately 3,999 mm (157.5 inches) in length, 1,680 mm (66.2 inches) in width, and 1,269 mm (50.0 inches) in height. Its wheelbase is about 2,400 mm (94.5 inches), contributing to its nimble handling and sporty design. Weighing around 2,400 pounds, the CRX Si is known for its lightweight and efficient performance.

To wire a Sony Xplod CD player (model CDX-GT52W) in a 1989 Honda CRX, you'll typically connect the power wires as follows: the red wire (ignition) to the car's accessory power, the yellow wire (battery) to a constant 12V source, and the black wire (ground) to a solid metal ground point. For the speaker connections, match the speaker wires from the CD player (usually color-coded) with the corresponding wires from the car’s harness. It's always best to consult a wiring diagram specific to your vehicle and the CD player for precise connections.

On a 1991 Honda CRX, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the rear seat and the fuel tank cover, then disconnect the fuel lines and electrical connectors. It's recommended to take safety precautions due to the presence of fuel vapors when working on the fuel system.

Honda advertisements often feature various artists and songs depending on the campaign. One notable example is the use of the song "What a Wonderful World," famously performed by Louis Armstrong, which has been featured in several Honda commercials to evoke a sense of wonder and appreciation for life. Additionally, Honda has collaborated with contemporary artists in different ads, showcasing a diverse range of musical styles. For specific ads, you may need to check the details of each campaign.

The distributor on a 1986 Honda CRX typically uses a 10mm bolt for mounting. It's important to ensure you have the correct tools and possibly a socket set to remove or install it properly. Always check the specific vehicle's service manual for confirmation, as variations may exist based on the engine model or modifications.

To remove the hatchback on a 1987 Honda CRX, first, ensure the vehicle is securely parked and the battery is disconnected for safety. Remove the interior trim pieces and any fasteners that secure the hatch, including bolts around the hinges and any other mounting points. Carefully detach the wiring harness for the rear lights and any gas struts if applicable. Finally, lift the hatch away from the vehicle with assistance, as it can be heavy.

To find the MAP (Manifold Absolute Pressure) sensor wiring diagram for a 1999 Honda Civic LX, refer to the vehicle's service manual or repair guides, as these provide detailed schematics. Typically, the MAP sensor will have three wires: a reference voltage (usually around 5V), a signal wire that sends data to the ECU, and a ground wire. The color coding for these wires may vary, so checking the specific manual for the correct color assignments is crucial for accurate wiring. Always ensure the ignition is off before working on the vehicle's electrical systems.

To troubleshoot a 1988 Honda CRX with no fuel pressure and no spark, start by checking the fuel pump and its relay, ensuring they are functioning correctly. Next, inspect the ignition system, including the ignition coil, distributor, and spark plugs for any signs of damage or wear. Additionally, verify the integrity of the main relay and check for any blown fuses in the electrical system. If these components are working, consider examining the ECU for faults.

Yes, a 1990 CRX SI door will fit on a 1990 CRX DX, as both models share the same chassis and door dimensions. However, there may be minor differences in features such as power windows or locks, depending on the trim. If you're swapping doors, ensure that you transfer any necessary components to maintain functionality.

To install an H22 engine in a 1990 CRX Si, you'll need to start by gathering the necessary components, including the H22 engine, compatible mounts, and an H-series transmission. Prepare the engine bay by removing the original engine and any components that may obstruct the swap. You'll also need to modify the wiring harness or use an H-series engine harness to connect the engine to the vehicle's electrical system. Finally, ensure proper alignment of the engine mounts and exhaust, and consider upgrading the cooling system and brakes for better performance.