0
Honda Prelude SI
The Honda Prelude SI was introduced in 1985 with a 1.8-liter engine, but was released with a two-liter engine in Europe a year later. The 1991 model sported a 2.3-liter engine that featured pop-up headlights.
794 Questions
What and where is ECU program on 89 prelude?
ecu program for 89 prelude si.what is it andwhere . htanks
How do you tell if the engine is locked up on a Honda Prelude?
Turn the flywheel located behind the drivers side wheel in front. Using a rachett
Why would the cooling fans on a 91 Honda prelude si not come on?
id have to look to see why but what you can do is get new fans and hook it up to a toggle switch. when you hook the toggle switch up just flip the switch before it gets too hot
How do you replace the speed sensor on a 1989 Honda Prelude 2.0si?
its not a speed sensor its a speed cable mine went out on my 89 lude i think it's about 40 bucks for the cable at the dealership. it's pretty easy to take out and install the new one as long as you know where to look.
Where is speed sensor located for 90 Honda Prelude SI?
I am in the process of replacing the speed sensor in my 90 prelude.
It is located on the transmission. with a small cable with a plug on the end of it.
Looking at it from the passenger side . you can see a picture of it on eBay.. just type in 1990 Honda speed sensor.. there are several...
Where is Tail light relay located leading to tail light 87 Honda prelude?
I'm looking for the same thing, I can't drive at night because my tail lights won't work, but my headlights work? My dash lights won't come on either. If you find anything please let me know. Ohshegotme@yahoo.com
It can be dona on a 3gen prelude, i ve done it. But lst of them 4 i 5 generetions dot know
How much horsepower for Honda Prelude si?
160 hp stock if it's 4th Generation (1992-1996). Any models other than that I don't know.
How can you fix your fuel gauge on your 1988 Honda Prelude?
It is highly likely that the fuel gauge is not working because the "sending unit" is not sending the fuel gauge information about fuel in the fuel tank. The "sending unit" is to be changed out at the the top of the gas tank (under the back seat). Accessing the unit should be done with the battery disconnected, unless blowing up your garage, home, your neighbors' houses, and, of course, yourself, is part of your plan. With the battery completely disconnected (I prefer to remove it for safety), you can unplug the electrical connector, unscrew the retaining screws, and pull out the fuel sending unit. The new one is inserted, screwed on, the electrical connector attached, the seat replaced, battery hooked up and ... WHOILA! The gas gauge is working, or, you are seeing satellite images of the space station. No. Seriously, the sending unit is the usual culprit in causing the gas gauge to not "read" properly, or even "read" at all. With some gas gauge failures, the sending unit tells the gas gauge that there is less fuel than there really is, and sometimes, the reverse, more fuel.
Is a 86 prelude si the same as the 89 prelude si engine?
yes they are the same the 2.0 l4 fuel injected
What kind of motor comes stock in 1991 prelude si?
Depends, I know they have 2.0 and 2.1 for the 91 prelude.
How can you increase the horsepower in a 1986 Honda prelude si?
add an air intake and full exhaust system if you havent yet done that
The valves could hit the top of pistons & ruin the engine.You should have this replaced a.s.a.p.
There are many possible reasons. You need to start by checking-
1. coolant level- If it is low, refill and recheck. There might be a coolant leak and you can get the system pressure checked, could be a blow head gasket. Coolant has a smell that is unique, if you smell something check for drip marks under the car after being parked. A leak from the radiator, hoses, temp sensor will usually have a residue/color stain.
2. check to see if the fan is working- a blow fuse/relay/motor if it is electric. If it has a clutch, check for clutch leaking fluid. It should have resistance when manually spinning when the engine is off.
3. check for debris in the grill radiator, blockage will reduce air flow.
4. Is the check engine light on? Have the codes read, it can diagnose sensor faults, misfires, blow head gasket.
5. Has the thermostat ever been replaced? with the engine warm, check the coolant return hose to radiator is warm, be careful if you have a mechanical fan. If the engine is at or above normal operating temperature and the hose is not hot the thermostat is stuck closed.
How do you change the headlights on a 1992 Honda Prelude SI?
Isn't easy- I replaced mine about a year ago. Took about three hours, the whole front bumper has to come off. If you keep up with all of the screws and have patience- shouldn't be a problem.
I'll second that, had a look at mine to clean around them and its one of those jobs i wish i never started. Checked here to see if i missed something but its the only way it seems.
Where is the thermostat located on a 1992 Honda Prelude Si H23?
It is located on the top radiator line where it connects to the block. There should be 2 bolts that secure it to the block.
== == Obviously, unless you have many dollars to waste on useless modifications to a 14 year old car, put in the EXACT SAME ENGINE. That way everything will fit and go together properly.
1996 Z28 350 makes a chirping noise from engine sound like its from rocker arms or lifter area?
Probably a sticking lifter; put in a can of RISLONE every time you change oil for the next few times; that should do it if it is just a minor problem. A chirping noise can also be a defective drive belt. I haven't heard of a chirping noise before, but I've heard of lifter tapping. If it's just some light lifter tapping, add some Lucas oil stabilizer next oil change. This is really good stuff that adds extra lubricants and protectants to the oil for better engine performance and durability. Adding this to your oil should take out any light lifter noise or tapping. I run this in my 94 Z along with full synthetic Mobil 1. They make the Lucas oil stabilizer in synthetic as well. Hope this helps you out.
