Windows XP

There are many reasons. Here are a few in no specific order:

1) the computer is off

2) the computer is in standby

3) the computer is in screen saver mode

4) the computer is in hibernate mode

5) the video card the monitor is hooked up to is not the primary video controller (check BIOS/CMOS settings, hook the monitor to the other video controller till you fix the issue)

6) there is something wrong with the computer (power supply, video card, RAM, motherboard, processor) and the computer is not POSTing.

7) the monitor isn't hooked up to the video card, check the connector

8) the computer is in a resolution or refresh rate that is too high for the monitor. Boot in safe mode and adjust the resolution and/or refresh rates.

9) the monitor cable is broken internally.

10) the monitor itself is defective.

To eliminate the monitor itself as the cause of the problem, hook it up to a known working system. If it works, look at issues 1-8.

Otherwise, probably time for a new monitor.

First of all you need to uninstall software to to delete it. Second you will need to edit your browser settings to change downloading program, and set it to the browser again. Third, it's possible that you will have to remove leftovers of the previous download manually.

you tell me XP

In order to install Windows XP on a ProBook you must follow these steps:

1. Go to BIOS setup

2. And then change the driver setting

3. Change ACHI to be IDE

4. Then restart your laptop

5. Know you can you can star install Windows XP

6. Enjoy your XP................!!!!!

Rio ze Don

When you send some text as output you can insert space sign " " and also there is a tab operator.

32 bit Microsoft Operating Systems only recognize up to 4 GB of RAM (some less than that). Only 64 bit OSes can currently see more than 4 GB.

If you have a capable OS and are still not seeing your full amount of RAM, then check and re-seat the RAM on the motherboard and make sure that you are following the correct seating configuration for your motherboard and bios settings.

For more information regarding Microsoft Operating Systems and RAM, see the Related Link below.

gg

LegalNoticeCaption

u can make 4 partitions in 80 gb harddisk

of 19000!

simple

Hkey_classes_root

If you don't need the file, you can delete it. If you do, you need to look through the configuration files (usually ".cfg") by opening them in notepad and removing the line that says something to the effect of "run (file name)" or "execute (file name).N.B. some of these files are nesecary for the program to run, so back up the config file just incase.

It can be read execute by all users

I am not aware of any sharing access for individual Excel files (if someone reading this knows how to do this with Windows, please improve the answer). File sharing permissions are for giving access to folders, not individual files. If you are not able to change the sharing permissions on the folder in which you have the Excel file stored, move the file to a folder or drive without sharing permissions.

See related questions and links for information about file and folder sharing.

yes you can . If your pc has a error and it detecs it you load it with hiren and choose plop and then choose the hard drive that has error usually it number 1 partition

Windows uses the registry to read all its settings. Most of these settings are wrote in binary form.

If the registry is corrupt you need to re-install the program that is showing you the message that it is corrupt. If you can't turn on your computer because it says corrupt, you need to re-install windows

By going to the insert tab, text box.

To install more than one operating system on a computer, it is best to start with the oldest first. For example, if you are installing Windows 98 and Windows XP on a computer, install the Windows 98 first. Put the installations on separate partitions. This will prevent conflicts between the two. Once you have installed the second operating system you will find that each time you start your computer, you are given the option of which operating system to invoke. Remember that if you have a Windows XP partition with files that you want to access from the Windows 98 (or Linux) installation, choose the FAT32 file system when installing XP. Windows 98 and some versions of Linux cannot access files on an NTFS partition.

The default port number depends on the protocol. If a URL starts, for example, with "http://", then the default port number will be 80. For other protocols, other default port numbers are used.

The default port number depends on the protocol. If a URL starts, for example, with "http://", then the default port number will be 80. For other protocols, other default port numbers are used.

The default port number depends on the protocol. If a URL starts, for example, with "http://", then the default port number will be 80. For other protocols, other default port numbers are used.

The default port number depends on the protocol. If a URL starts, for example, with "http://", then the default port number will be 80. For other protocols, other default port numbers are used.

keyboard

It means you, as a user are not set up as an administrator on that computer. Usually, the person who's computer it is, is automatically logged on as administrator (I always have been ever since I got this laptop). When the computer wants to make changes (for example when installing new software) it's usually just a case of confirming you want the action to proceed. If it's asking for an admin password - you're only logged on as a user, and need to change your account status to administrator.

Graser

THe backup and the restore wizards

Check this

http://filext.com/file-extension/smf

.smf is a MIDI FILE. a (Musical Instrument Digital Interface) sequence or song. Any hardware or software program that will play a midi file, IE, a Keyboard sequencer, or software music program (like this program below). It can be transferred from a computer with a usb, and/or a midi cable to a hardware sequencer, ie drum machine, keyboard work station.

http://createdigitalmusic.com/2006/07/17/free-windows-sequencershosts-for-music-straight-out-of-no-cash-2/

You would need the appropriate control box to adjust the engine controls. Bear in mind that, if this is a company vehicle, any alterations made to the engine controls will appear on the mechanic's computer when they download the information at your next service. Additionally, if the vehicle is equipped with a Qualcomm system, that'll send an alert out if you're going at speeds over the company mandated speed for excessive periods of time.

Additionally, the fleet speed may be a stipulation of the insurance policy on the vehicle, and altering it may render the insurance contract null and void.

Once you're caught, and fired from your company, the reason for you being fired will be placed on your DAC report - this is true whether you're a company driver, or whether you're an owner/operator or lease operator leased out on someone else's ICC/MC authority. This will greatly hinder your chances of finding employment elsewhere.