0
Windows XP
MS Windows XP operating system that was released for PC computers in 2001
9,737 Questions
How can windows explorer be used for formatting a disk?
Go To My Computer and OPEN the folder. Right-click the Disk you want formatted. Left-click to pick Format and choose your options, to format for instance A: disk. It will erase any files on any disk you choose to FORMAT so choose only a drive you want to clear and format.
What is the extension of PageMaker?
The extension of PageMaker files is typically ".pmd" for documents created with Adobe PageMaker. Additionally, when exporting to other formats, you might encounter extensions like ".pdf" for PDFs or ".doc" for Word documents. However, PageMaker itself is largely considered obsolete, having been replaced by more modern desktop publishing software like Adobe InDesign.
How much to cap outdoor windows?
The cost to cap outdoor windows typically ranges from $50 to $150 per window, depending on factors such as the size of the window, the materials used, and labor costs in your area. Additional features like insulation or decorative trim can increase the price. It's best to get quotes from local contractors for a more accurate estimate based on your specific needs.
Sisera will come at the end of times to prove that the man of lawlessness is at work. The man of lawlessness has come to power already. Now, is the countdown until Christ returns. Tick-Tock Tick-Tock Tick-Tock Tick-Tock. Just remember, Jesus Christ is the only true savior of the world. The Holy Scriptures say that anyone who calls on the name of the LORD shall be saved. May anyone who reads this, be blessed by the Holy Spirit.
I found the following solution at:
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
...and it worked!
maybe if you go there you can read better. For Lexmark printers, follow until the very end. NOTE: Dell printers are made by Lexmark and have the same issue!)
How to clean up printer drivers
If the Print Spooler service fails when printing, when Windows starts or it can not be restarted, the usual reason is that one or more printer drivers is defective. If the Print Spooler service is not running, the Printers and Faxes folder will be empty and you can not use it to remove (or add) printers or printer drivers. If you have a Lexmark or Dell printer, see special information about Lexmark printer drivers.
It's important to only install printer drivers that are designed and built specifically for the Windows version you have. This is particularly important for Windows XP; many of the CDs and floppy disks distributed with printers (particularly older models) do not have Windows XP drivers - check the printer manufacturer's web site for printer drivers for the version of Windows you have (see Links).
A common cause of printer driver problems is to upgrade to Windows XP from Windows 95, 98 or ME without first removing the printer and the printer drivers.
The steps on this page will remove all printers and printer drivers from the computer. The printing subsystem is then "clean" and ready for printers to be added using printer drivers specifically for the Windows version you have.
If you have drivers for several printer models installed (e.g. on a Print Server computer) it may only be necessary to remove the defective printer drivers. At steps 2, and 7, just delete the entries for the printers or printer drivers you suspect are defective. Unfortunately, the files that comprise the drivers are all in the same folder. Also, the same files may be used by the drivers for several printer models. So, selectively deleting the driver files at step 12 may be difficult or impossible. With Windows 2000 and XP, in most cases, deleting the registry entries for the drivers (step 7) will be sufficient, so you may want to skip steps 10 through 12 if you have multiple printer models and don't want to re-install all of them.
Check in Control Panel, Add/Remove Programs; if there is an entry relating to one of the printers, select it, then click Change/Remove. Follow the dialog and "uninstall all" or "remove all" as appropriate. Some "printer software" have programs that show up here and it will be a good idea to remove those before going any further.
If the Print Spooler service is operational:
1.
Open the Printers (Printers and Faxes on Windows XP) folder 2.
delete all of the printers 3.
click File, Server Properties 4.
select the Drivers tab 5.
for each entry: 1.
select the entry 2.
click Remove
Usually, this will do a pretty good job of cleaning out drivers with Windows 2000 and later (not so with Windows NT 4).
If the Print Spooler service is not operational, or you want to make certain there are no printer driver remnants, either follow the instructions below or use cleanspl.exe from the Windows 2000, XP or 2003 Resource Kit (http://www.microsoft.com/downloads/details.aspx?FamilyIDen). cleanspl.exe from the Windows 2003 Resource Kit tools will work on Windows XP.
Some information about cleanspl.exe:
*
cleanspl.exe does a very thorough job of cleaning up the print spooler stuff, but it does not remove the spooler service dependency on the Lexmark service (see special information about Lexmark printer drivers. *
You can use it to clean up the spooler stuff on another computer (i.e. remotely). *
When you run it, it asks you if you want to remove some things that are actually delivered (and installed by default) with Windows. In most cases, you should answer No to the corresponding prompts (you don't want to remove the Standard TCP/IP Port or the BJ Language Monitor).
Here's how to clean up the print spooler stuff if cleanspl.exe is not available or you prefer to do things manually.
Warning! be very careful using regedit - if you delete the wrong things, you may render your computer inoperative!
6.
open regedit (e.g. click Start, key regedit and press Enter) 7.
navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers
under this key, there will be the keys Version-2 and Version-3 (one or the other of these may be absent - not a problem)
the sub-keys under these contain the printer driver configuration information
delete all the sub-keys inside Version-2 and Version-3, but not these keys themselves
The Microsoft Knowledgebase article at http://support.microsoft.com/default.aspx?scidkb;en-us;324757). The steps below make the print spooler service only dependent on the Remote Procedure Call (RPC) service (RPCSS), which is normal. The print spooler service dependencies are stored in the registry at
HKEY_LOCAL_MACINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService
The sc config command at step 16 resets the value of that entry.
15.
Open a Command Prompt window 16.
key the command sc config spooler depend but not before) 17.
restart the print spooler (see steps 8 and 9 above)
How does computer's BIOS kick on?
Not sure exactly what you asking, but the bios is the first thing to turn on in is what gets all the hardware ready and makes sure nothing is missing or damaged. As to how it turns on i would have to say... Electricity running through wires and microprocessers?
How do you get the icon Desktop for Windows xp?
right click on desktop and properties desktop customize desktop
and select icon to view it on your desktop and click OK
I guess you find the instructions and them follow what it says to do. if not ask a person who works with the system.
How do you restore task bar position to horizontal?
Right-click on your taskbar, if a tick is next to the Lock taskbar option, make sure it is disabled. After that click and drag your taskbar to the bottom or top of the screen.
Why is it advised to perform the backup function on a regular basis?
If something goes wrong with your computer, you won't lose all of your data and documents.
Why ipconfigure command use for?
I've never heard of an ipconfigure command in any Unix or any Linux.
I have heard of the ifconfig command however, perhaps you meant this. If so, re-post the question with the appropriate command.
How much does it cost to paint the hull of a 36' sailboat?
There are too many variables associated with this question to answer it properly:
#1) The square footage of the area to be covered determines the amount of paint necessary.
#2) Cheap paint gives cheap results.
#3) The cost of paying the painter.
#4) The cost of keeping the boat out of water long enough to paint it.
Usually when this scenario occurs the users are so tightly controlled that it is very difficult for them to get anything done. As a result, frustrated users (who are blocked from doing their job, etc.) will not get useful work done.
How can you save files on notepad in bat format or if you can?
When you go to save, enter the name and and add .bat after it, with the whole thing in double quote marks.
E.g:
"name.bat"
Where do you find USBIO controlled devices in device manager?
I'm assuming yo're trying to get the Action Replay DS to work with vista? Lots of people have the same problem, and the solutions always say to look for "NDS Link" in "USBIO controlled devices" in device manager, yet fail to mention how to solve the also common problem of there being no "USBIO controlled devices" in device manager. So here's the solution!
-Make sure the Action Replay DS disk is in your CD drive install the code manager off of it, but LEAVE IT IN THE CD DRIVE FOR NOW.
-With the Action Replay in your DS, turn on the DS and plug it into your computer. It should say something like "unknown software/drivers found" or whatever; select the option to automatically find the correct drivers and install. Now, one of two things will happen:
1. Hopefully, it will ask you if you want to install it with the drivers from the disk that's still in your CD tray; select that and voila! ARDS now works on vista. And if you check device manager, it will now have a "USBIO controlled devices" folder, containing "NDS Link."
2. If that didn't happen, it probably said it couldn't find the drivers, as if the disk wasn't in the tray. It usually did this for me, and lots of people, even though all the customer service things said the result above would happen. If this happens, plug in the DS to a different USB slot, and try again. I don't know why it only works with one USB slot, but it just does. If you tried all of your USB slots and it still doesnt install the drivers, I'm afraid I can't help you from there.
Hope that helped; if not I'd try e-mailing a codejunkies employee.
Artise B's note...these steps work for windows7 64bit...i dont know about vista
- if this doesn't work
Click the Start button . In the search box, type run, and then, in the list of results, click Run.
- In the Run dialog box, type hdwwiz, and then click OK.
- next you will get a message if you have the installation CD cancel blah blah...click next
- select the option "install the hardware that i manually select from a list (advanced)
- next select "show all devices"
- next select the box "have disk..."
- place your computers CD drive in the space (it will not select the correct driver automatically) then select OK
- then hit next and next again to install the hardware
- unplug your USB and plug it back in (with the AR turned on) and bam! MONEY!
Where and how do you double click on the CD drive?
cd drive is visible usually like a c drive or d drive
point your mouse ponter on the cd drive by moving your mouse or pointing device
then double click by pressing your left mouse button 2 times.
make sure the pointer is on the drive.
Why items placed in the recycle bin take up hard drive space?
Because there are not deleted yet but were moved in the new location. If you want to get the space back you have to clean the recycle bin too.
What tasks do people who work in marketing perform?
Search for factual information Read avidly Borrow ideas Talk to customers Develop print layouts, package designs, storyboards, corporate logotypes, trademarks, and symbols Specify style and size of typography
Farmville gives you however long it takes to grow the crop. For example, if you are growing tomatoes which take 8 hours, you get an additional 8 hours after they are ready before they wilt.
How do you display the contents of a text file in command prompt?
DOS (Windows):
TYPE
Displays the contents of a file on the screen. If you use this command on a file which is not a text file, the display will be unintelligible. Use with "|MORE" to display the text on a page by page basis, and prevent it scrolling off the screen. "|" is a pipe character.
LINUX:
cat
less
this are commands (programs) that let you view text files, less is like cat, but if the files are so long that they don't fit on your screen,less automatically paginates the file. You use less by giving the file name as an argument to it:
less filename.txt
You use cat in the same way by giving the file name as an argument to it:
cat filename.txt
