Windows XP

if you remove the paging file from the boot partition, Windows cannot create a dump file (Memory.dmp) in which to write debugging information in the event that a kernel mode Stop Error message occurs. This could lead to extended downtime if you must debug to troubleshoot the Stop error message.

Drivers are installed to the system32 folder because they are important for your hardware to work, they tell your computer how to use the hardware that they are designed for. Most users know not to go in there and delete stuff randomly. It's important to note that not all drivers are installed to the system32 folder, some are stored in their own directory.

This depends on your expertise and preference. Typically I suggest setting your optical media drive (CD/DVD/ETC) as your first boot device, but this tends to slow down your boot time ever so slightly as the drive seeks in order to figure out if the disk in the drive is bootable media or if there's even a disk in the drive. It makes installing boot-level media far easier, however.

If you know what you're doing and know how to manually open the boot menu without going into setup, then set your hard disk as your first boot device, followed by your optical media drive, then finally any other medium such as floppy drive, removable media, etc.

Perform a hard power off. One can try holding down the power button down for 5 seconds or more. Should there be one, one can also flip a power switch typically behind a computer. The power cord can also be removed, or surge protector turned off.

The Windows XP Architecture uses both Kernel Mode and User Mode. The kernel mode is the layer of the operating system's code that is responsible for handling such fundamental operating system items as virtual memory and scheduling which applications will run at any given time. User mode is where your actual program runs and is controlled by components of the kernel. For example, the kernel is responsible for allocating the memory that an application uses.

You have two ways to resize a partition:

1. Use the built-in Disk Manager in Windows7/XP. However, with it's help, you can only increase your system partition e.g. Drive C:, but can't shrink the size of partitions.

2. Use a third-part software. I recommend all the users of Windows OS to download a third-part freeware for managing your hard drive. An excellent partition assistant is suggested: Aomei partition assistant Home Edition. It's totally free and simple to use, you can read the guideline below to know more details about this partition magic.

---------------------------------------------------------------------------------------------

1. Resizing partition with the Partition Manager on Windows 7

You can resize directly to the desired size for your partition. Clink Resize.

At the opening of the window you can then indicate with precision the size of your new partition.

You can reduce the size quickly and change the partition size by dragging the double-headed arrow (circled in red). Then click OK.

Your hard drive will appear in two parts: A partition with operating system Windows 7 (in blue) and an Unallocated Partition (in gray).

To validate these changes simply click on Apply.

2. Create a partition with Partition Manager Assistant Home Edition 2.0 on Windows 7

Once you have completed the resizing your partition, create the partition so that Windows 7 will recognize it and can use it. This is the same to right click on the unallocated partition and click on Create.

Otherwise, you can also select the unallocated partition and click on Create.

In both cases, you will get this dialog box telling you the settings to create your partition.

In the partition label (partition name) enter a name easy to remember and easy identification. We chose to use the name of Disque_6GB. While this is optional, we recommend that you define then a letter to your reader. For our part we have chosen the letter E. It's your choice and identify that the letter of your future hard disk partition. Then click OK.

All parameters for the partition management are now complete. It remains only to apply for that Partition Assistant Home Edition 2.0 makes these changes and recognize them in Windows 7.

To validate these changes simply click on Apply.

3. Apply changes all partitions to take effect

Once you have clicked on Apply, you will confirm these changes by clicking on Proceed (Continue).

Note: In the Resizing Partition (partition resizing) in blue you have an instruction required reboot (restart required) which means you'll have to restart your computer for the changes being made. Save your open documents before you click on Proceed (Continue).

Then click Restart Now.

Windows 7 is going to restart.

At this stage it is always possible to undo the changes by clicking on any key on your keyboard. Otherwise, the partitioning assistant will launch after 8 seconds...

The changes are being ... Partition Assistant 2.0 Home Edition is currently conducting the required changes ... It will take time Partition Assistant Home Edition 2.0 transforming. Attention these ends, it is important to be patient and do not restart your computer until the process is not completed.

Conclusion

In this tutorial we saw how Windows 7 change a partition, the resize or shrink partition with application Partition Assistant Home Edition 2.0. It free provide for personal users or home users. The Partition Manager has the functions which the Windows "Disk Manager" doesn't have, such as resize system partition, extend/shrink partition and move partition. These cannot be handled via the Windows built-in partition manger, so the 3rd party partition software, Partition Assistant is needed to you. Yes, you will free enjoy all features of the partition manager.

More informations at: http://www.disk-partition.com/resource/free-resize-partition-windows-7.html

I tabulated most commonly used Windows Shortcut keys as:

SHORTCUT KEYS (KEYBOARD KEYS)

MS WINDOWSALT or F10-Menu BarALT + F-File MenuALT + E-Edit MenuF1-HelpF2-Rename / Edit Name of file / folderF3 (on Desktop)-Search file / folderF4 (In Browser)-Address BarF5 (on Desktop)-RefreshALT + F4-Close Window / ApplicationCTRL + F4-Close window within an ApplicationALT + TAB-Switch between open windowsCTRL + ESC-Start MenuCTRL + A-Select All objects / textCTRL + X-Cut the selected object / textCTRL + C-Copy the selected object / textCTRL + V-Paste the cut / copied object/textHOME-Go to beginning of LineEND-Go to end of LineSHIFT + HOME-Select up to beginning of LineSHIFT + END-Select up to end of LineCTRL + ‘-Move one word to LeftCTRL + ’-Move one word to RightALT + ENTER-Properties of a selected iconSHIFT + F10-Right Click MenuDEL key-To delete a file / folder (Recycle Bin)SHIFT + DEL-To delete a file / folder permanentlyWIN key + D-Show DesktopWIN key + M-Minimize all WindowsSHIFT + WIN key + M-Restore all WindowsWIN key + E-Windows ExplorerWIN key + F-Search file / folderWIN key + F1-MS Windows HelpWIN key + R-RUN windowCTRL + Z-Undo the last ActionALT + ” or ”-Open List Box

Hope this would help u...

For printing the Legal Size (8.5″x14″) in cannon LBP-1210, follow the instruction:

Step 1- Go to start

Step 2-printer and faxs

Step 3-select printer(Canon LASER SHOT LBP-1210)

Step 4-go to file

Step 5-select Server properties

Step 6-select create new form (for legal page)

Step 7-give form name legal 1

Step 8-give paper size width 8.50in, height 14.00

Step 9-give paper margin top 0.30in, left 0.30in, right 0.30in, bottom 0.30in

Step 10-select save form Step 11-then select advanced

Step 12-select informational notifications for local printers

Step 13-select apply

Step 14-then close

Step 15-select Canon Laser Shot LBP-1210

Step 16-select printer

Step 17-select properties

Step 18-select-select forms

Step 19-select change forms

Step 20-select legal 1

Step 21-select OK

Step 22-select apply

Step 23-select OK

Remember: 1 U need to set paper size (8.5″ x 14″) manually in the word documents and befor printing you need to set in printer properties "Legal 1″ for printing. Print preview may not show the whole page but the printer will print the whole page.

All the best.

PARVEZ [INFO(at)parvezbd(dot)com]

Macs do not have an Insert key. This is generally considered a good thing. A suitable replacement key will vary depending upon the application being used. If you wish to overwrite text then the text to be replaced should be highlighted and then anything typed will replace the highlighted text.

From the Virtual Box File menu select Virtual Media Manager... This will present you with a list of installed operating systems on their virtual discs. Select the systems no longer required and click the Remove button at the top. You will then have the option to delete the virtual disc to regain the space for your hard disc.

IP Address

A product key should be used ONLY for 1 computer. The product key should not be used more than once. However, if you have used a product key more than once, the product key can be changed without re-installing the operating system.

NFS

Linux runs on a large variety of hardware. Windows will only run on hardware with an x86-compatible processor (Core 2, Xeon, Athlon 64 X2, etc...). Also, even the Professional edition of Xp will only scale to two physical processors. So much of your computing power will likely go to waste. To use all of the processors, you need Windows Server 2003 or higher.

Encryption

By going into 'Run' in the start bar then type in msconfig into 'Run' click on programs at the top then disable all the programs that don't need to be started first thing like Itunes, Microsoft office ect.. then it should run faster.

Do not delete this, if you do your computer will become non functional. Telling users to delete this was a common "troll" on the internet used to make people unfamiliar with computers to delete critical system files. For more information please see the related link

a computer that resides in some distant location from which data can be retrieved .It typially refers to a server in a private network or public network.

It is not clear what you mean by "tab," but if you are talking about a window, then there is no shortcut for Excel to minimize or maximize a window. You need to click on the symbols in the top right corner of the window to maximize or minimize.

It's not easy, and you will probably have all sorts of compatibility and graphical problems with the games you try, but it can be done. Still, the games will be nowhere near as good as they are on the PS2. You need to get a PS2 Emulator - Google that and read the site's How-To guides.

Default drive letter for a hard drive is C

On my computer there were two hard drives installed, and the second was D

CD drive is E

USB ports are F, G, H, I, J, and K on mine

shortcut menu

you just simply press the maximise button it's that simple...