Cable Internet

You would connect the output of the first AND gate to one input of the second AND gate. You are left with 2 inputs on the first AND gate and 1 input on the second AND gate. The final output is from the second AND gate.

It's not that much faster -- maybe a little over twice as fast. DSL gives you 1,500 Mbps and cable can go as high as 8,000 Mbps.

^ This is wrong (old answer) ^

First, 'b' is Bit, 'B' is Byte. There are 8 bits in a byte

In the case of the question (Megabits per seconds):

100.0 Mbps is equivalent to 12.5 MBps (Megabytes per second).

Dial up modems are (generally) capable of doing 0.056MBps (56Kbps) maximum,

100.0 Mbps (12500Kb/s) is ALOT faster!

A form of digital communication was developed in the 1960s with the advent of T1 trunking. DSL was developed by Bell labs in the 1980s.

Some routers have problems with firmware. If you have problems with your router check if you have last update installed. If you do not have, install it. If it does not work your best bet is visit manufacture's forum. People usually share their problems as well solutions.

Yup

a regular's Person internet is about only 10 mbps or more.. or less.. Who Knows. bu t65 mbps its.. Uh Pretty Good I guess i have 65 as well.. I guess its ok.

Public television broadcasting made its appearance in 1929 when the BBC started their first service from London. It was only a part time service and was just a single channel, delivering news and public information content for the first year or two. By the early 1930s they had moved on to entertainment as well as news.

In America, it took a little longer to start public broadcasting. Although there were several demonstrations, it wasn't until 1939 that RCA launched North America's first service.

Go to the "Start" menu in the lower left corner. After you click it, go to "All Programs" at the very bottom of the menu. A big list should appear. Look for "Accessories." Once you find that, click on it, and find "Calculator" in the list it gives you.

I hope this is informative enough!

Because the IP address for the settings of every brand of router is different, the best answer is to enter the brand and model of your router along with the phrase "set password" into your favorite search engine to find the directions to set/reset your password.

If you are talking about a coaxial wire. It has a much larger diameter for the main conductor. This creates less signal loss so long runs will have more decibels at the end of the run.

Registry is the databse of windows which stores all configuration information. When you install or uninstall something, this information is saved in registry.

For general internet browsing download speed is directly related to the speed of your connection. Want faster speed, then switch to DSL or Cable.

For downloading large files, try using download accelerator plus. It is very good and speeds it up a lot and you can pause and resume downloads and even if there is a power cut or the computer crash's when you turn it back on you can just resume where you left of and it is free and good for large file downloads like games and stuff.

All digital electronic circuits are composed of logic gates. Without logic gates there would be no digital electronics.

either your mordem is not connected or installed correctly or your server is down i.e. it is not sending link, so first check the connection and if that is fine then call your server provider company and registar a complain for it.

Yes and no. The no is that a modem can only have one device plugged into it, a router of some sort.

The yes being that you could have multiple wireless routers, acting as access points, on one network. As long as they have unique internal IP addresses and are broadcasting different SSIDs on different channels (unless you are bridging, which is way beyond this) then you could have different wireless networks on the same connection.

You need to get a good wireless router (use google to find out which one will suit your purposes). Also you need existing internet connection (DSL, RoadRunner and so on). After that you need to connect your router to the modem using the lan cable included with the router. Use WAN port to connect the wire between the router and the modem. After that set wireless security (read the manual for your router).

Some ISP use MAC of your computer to grant access to internet, you might have use the option "Clone your PC MAC" for your router if you want to connect to internet.

Most wireless routers also allow you to plug in 4 to 8 other Ethernet cables. It would not be a router otherwise, it would simply be a wireless access point. The cable connections are also faster than the wireless (at this point).

You'll probably need to plug the cable modem to the cable line. Then plug an ethernet cable from the modem to the WAN port on the router. Then connect each of your computers (via ethernet cable) to the router.

A wireless router provides a wireless network, but does not provide Internet connectivity by itself, unless it is a combination router/modem, such as a Motorola Surfboard. A typical home wireless router will not have this functionality included, so a cable modem is often required to access a cable provider's Internet service. Buying a device that includes both wireless routing and cable modem features will allow the network to access the Internet without a dedicated cable modem, while all others will require a cable modem separately. In either case, a device that provides the features of a cable modem is required for cable Internet.

An internet speed of 100 is fast if it refers to megabits or gigabits per second. If it is a 100 kilobit per second connection, it is very slow and only twice as fast as dial-up.

Many photo sharing sites allow free storage up to a certain point. Some of those include:

- Google Picasa

- Shutterfly

- Smug Mug

- Snapfish

- Flickr

- Photobucket

A modem is a device that allows a single computer to connect to the internet, it requires a username and password to connect usually. A router connects multiple computers and is always connected. It does NOT require a username or password to connect to the internet. Routers can also be wireless, whereas modems can not.

No. The Magicjack has to plug into the USB port of a computer, and the computer has to be on for the phone to work.