0
Cable Television
A cable television is a system that distributes television signals by means of fiber-optic or coaxial cables. Cable television systems started in the United States in the late 1940s to enhance reception in hilly and remote areas, where broadcast signals were weak.
3,389 Questions
What are the effects that price ceiling can have on a product?
a price ceiling results in a shortage because quantity demanded exceeds quantity supplied. it can increase consumer surplus but producer surplus decreases by more causing a deadweight loss in the market.
Describe how Hopfield networks can be used to have analog to digital conversion?
Attractors of Hopfield network can be considered as digital presentation of analog inputs. Every analog input is classified as "hear" to some of attractors, so attractor (which is vector, including binary output of neurons) is digital conversion if analog input (vector, including input signals of neurons.
What does hal2 mean on a cable box?
It's a normal thing, all it means is that it's re-starting. If you hadn't restart it yourself, it might be responding to a glitch also a lot of other reasons but it's usual.
Can you Compare and contrast analog and digital forecasting?
Digital forecasters rely on numerical data
Analog forecasters involves comparing weather patterns to patterns that took place in the past
What is the att uverse remote code for a toshiba 42hm66 dlp projection tv?
I just used a Zenith code 1255 for my Toshiba HDTV and it worked! Good Luck!
Defined as the distance or length between one peak of a wave of light, heat or other energy and the next corresponding peak.
It is stated that cable first appeared in Pennsylvania in 1940. Cable did not begin to spread across the country until 1948.
Ge universal remote rc24914e and you need the code for a sony DVD player dvp-ns400d?
MANUALLY ENTERING CODES
1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.
2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed, try the Code
Search method described below.
USING CODE SEARCH FUNCTION
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.
1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH/SETUP until the INDICATOR
LIGHT lights, then release.
3. Press and release the device button for the device you are
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device
button you are assigning to AUX.
4. Press and release POWER until your device turns off. Wait at least
2 seconds between each time you press POWER. Important: You
may have to press POWER up to 250 times.
5. When your device turns off press the ENTER/SAVE button. The
INDICATOR LIGHT will go off.
Quiero imprimir mi recibo de megacable?
Si logras verlo en pantalla, normalmente puedes dar la orden "archivo | imprimir". Si no sabes de dónde obtener tu recibo, sugiero que consultes con megacable.
WHAT are all the alien names off ben10 alien force?
chromastone,jetray,goop,echoecho,brainstorm,humungsesaur,swampfire,bigchill spidermonkey and alienx
