Chevy Corvette

If your 1990 Corvette has a new fuel pump but won't start, there could be several issues to consider. First, ensure that the fuel pump is receiving power; check the fuses and relays associated with the fuel system. Additionally, verify that fuel is reaching the engine by checking for fuel pressure at the fuel rail. Lastly, inspect other components like the ignition system and sensors, as they could also prevent the engine from starting.

A fuel pump relay in a 1998 Corvette may have no power due to several issues, including a blown fuse, a malfunctioning ignition switch, or a faulty relay itself. Additionally, wiring problems such as corrosion or a short circuit could interrupt the power supply. It's also possible that the vehicle’s anti-theft system is preventing power from reaching the relay. Checking these components can help diagnose the lack of power.

In "Transformers: Age of Extinction," the green Corvette is named Cade Yeager, who is actually the human character played by Mark Wahlberg. The car transforms into the Autobot known as Crosshairs. Crosshairs is a skilled marksman and has a personality that reflects his cocky and somewhat rebellious nature.

No, the 1989 Corvette does not have airbags. Airbags were not standard in most vehicles until the mid-1990s, and the Corvette introduced them later in its production. Instead, the 1989 model features other safety features typical of that era, such as anti-lock brakes and a reinforced body structure.

A squiter is an informal term often used to describe a person or thing that squirts or sprays liquid, typically in a playful or unexpected manner. It can refer to toys, like squirt guns, or animals, such as certain species of squids that eject water as a defense mechanism. The term can also be used in a humorous context to describe someone who might be prone to spilling or splattering fluids.

The fluid capacities for a 1998 Oldsmobile Silhouette vary by system, but the engine oil capacity is approximately 5 quarts with a filter change, while the transmission fluid capacity is around 11-12 quarts. The cooling system typically holds about 12 quarts of coolant. Always refer to the owner's manual for the most accurate specifications.

To reset the oil change light on a Corvette, first turn the ignition to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. Finally, turn off the ignition and restart the engine to ensure the oil change light has been reset. Make sure to check your owner's manual for any model-specific instructions.

The oil dipstick on a 1978 Corvette with an L-48 350 engine is located on the passenger side of the engine. It is positioned near the front of the engine block, towards the intake manifold. You can easily access it by lifting the hood and looking for the dipstick tube, which is typically marked with a yellow or orange handle.

Yes, the visor and rearview mirror lights on a 2004 Corvette are typically connected to the vehicle's interior lighting circuit. If these lights are not working, it's a good idea to check the fuse box for any blown fuses related to interior lights. The specific fuse location can usually be found in the owner's manual or on the fuse panel cover. If the fuse is intact, the issue may lie elsewhere, such as with the bulbs or wiring.

To remove and repair the power antenna on an '81 Corvette, first disconnect the battery to prevent electrical issues. Access the antenna by removing the rear quarter panel trim and any fasteners securing the antenna. Detach the antenna's wiring harness and unscrew it from the body. For repairs, inspect the motor and gears for damage; replace any faulty components, reassemble the antenna, and test its functionality before reinstalling the trim.

To set the tire monitoring system on a 1998 Corvette, first, ensure all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press and hold the "Reset" button, typically located on the dashboard, until the tire pressure light blinks, indicating that the system is in reset mode. Release the button, and the system should now be calibrated to monitor the tire pressures accurately.

The timing specs for a 1997 Dodge Ram 1500 with a 5.2-liter engine typically include a camshaft timing of 0 degrees TDC (Top Dead Center) for the No. 1 cylinder at the specified timing marks. The ignition timing should be set at around 12 degrees BTDC (Before Top Dead Center) at idle. It's important to consult the vehicle's service manual for precise specifications and adjustments based on engine conditions.

To add transmission fluid to a 1978 Corvette, first ensure the vehicle is parked on a level surface and the engine is running. Locate the transmission dipstick, which is typically found near the back of the engine compartment. Remove the dipstick, wipe it clean, reinsert it, and then pull it out again to check the fluid level. If needed, use a funnel to add the appropriate type of transmission fluid through the dipstick tube until it reaches the correct level, then recheck the level again.

In 1981, the base price of a Chevrolet Corvette was approximately $13,000. However, prices could vary based on options and features, with some models costing significantly more. This era's Corvette was known for its distinctive design and performance capabilities, contributing to its popularity among sports car enthusiasts.

The first water pump is attributed to the ancient Greek engineer Ctesibius, who lived around 250 BCE. He created a device known as the "syringe pump," which utilized a piston mechanism to draw and expel water. However, various forms of water-lifting devices have been used in different cultures throughout history, including Archimedes' screw in ancient Greece and the shaduf in ancient Egypt. These early innovations laid the groundwork for modern water pump technology.

The relay for the engine cooling fan on a 1990 Corvette is located in the engine compartment, specifically in the relay center near the driver’s side of the engine bay. It is typically mounted on the driver's side fender well. You can identify it by referring to the under-hood relay diagram, which provides the exact location and identification for the cooling fan relay.

To change the oil in a 2002 Chevy Corvette, first ensure the engine is warm, then turn it off and let it cool slightly. Raise the car and secure it on jack stands, then remove the oil drain plug from the oil pan and let the old oil drain completely. Replace the drain plug, remove the old oil filter using an oil filter wrench, and install a new filter. Finally, fill the engine with fresh oil through the oil fill cap, using the recommended oil type, and check the oil level with the dipstick.

On a 2001 Corvette, the turn signal flasher is located under the dashboard, near the steering column. It is typically found in the fuse box area, which is on the driver's side. You may need to remove a panel or cover to access it. If you’re troubleshooting or replacing it, refer to the owner's manual for detailed guidance.

The cost of a 2010 Corvette typically ranges from $25,000 to $40,000, depending on factors such as mileage, condition, trim level, and any modifications. Prices may vary based on the market demand and the specific features of the vehicle. It's advisable to check current listings and local dealerships for the most accurate pricing.

The Burn o' Vat is a natural feature located in Aberdeenshire, Scotland. It is a deep, circular hole formed in a rocky hillside, believed to have been created by the erosion of the rock due to water and natural forces. The site is popular for its scenic beauty and is often associated with local folklore. Visitors can explore the area and enjoy the surrounding landscape, which includes walking trails and lush greenery.

On a 1984 Corvette, the door ajar switch is typically located in the door latch mechanism. When the door is closed, the switch is pressed, completing the circuit and indicating that the door is secure. If the door is open or not fully closed, the switch is released, triggering the door ajar warning indicator on the dashboard. To access it, you may need to remove the interior door panel.

A 1981 Corvette typically requires about 5 quarts of oil when using a standard oil filter. If you're using a larger aftermarket filter, it may take slightly more, around 5.5 quarts. It's important to check the owner's manual for specific recommendations based on the engine type. Always ensure to check the oil level after filling to avoid overfilling.

In the 1989 Corvette, the Anti-lock Braking System (ABS) module is typically located under the hood, mounted on the driver's side near the brake master cylinder. It is housed within a metal bracket and connected to the brake lines. For easier access, it may be necessary to remove some components or covers around the area. Always consult the vehicle's service manual for specific guidance and safety precautions when working on the brakes.

An LS Corvette engine typically weighs between 400 to 450 pounds, depending on the specific model and configuration. This weight includes the engine block, heads, and necessary components, but excludes accessories like the intake manifold and exhaust. The lighter weight of the LS engine contributes to the overall performance and handling of the Corvette.

The clutch reservoir for a 1985 Corvette is located on the driver's side of the engine compartment, near the brake master cylinder. It is typically mounted on the firewall, making it accessible for checking and refilling the hydraulic fluid. Make sure to use the correct fluid type as specified in the owner's manual for optimal performance.